journal article·2015-12

A comprehensive study of infrared reflectivity of poly(3,4-ethylenedioxythiophene) model layers with different morphologies and conductivities

Charlotte Louet, Sophie Cantin, Jean-Paul Dudon, Pierre-Henri Aubert, Frédéric Vidal, Claude Chevrot

Publisher page

Abstract

Abstract Electro-reflective properties in the mid-IR of a series of electropolymerized poly (3,4-ethylenedioxythiophene) (PEDOT) layers were studied in their doped and dedoped states and correlated to their morphology and electronic conductivity properties. The films were prepared on ITO electrodes using lithium perchlorate or lithium trifluoromethanesulfonate as supporting electrolyte and acetonitrile as solvent. In order to investigate the effect of the surface morphology, each side of the films was studied, i.e. either the smooth surface in contact with the ITO substrate during synthesis or the rougher surface in contact with the electrolytic medium which morphology varies with the polymerization charge density. For both salts, the IR reflectivity of doped films having similar electronic conductivity decreases drastically upon increasing surface roughness. This was attributed to enhanced absorption in the same way as reported for metallic surfaces. Therefore the full control of the morphology may improve the device optical properties in the IR range. In addition, whatever the electrolyte, the IR reflectivity is shown to follow the same trend as a function of the electronic conductivity varying over about five orders of magnitude. Furthermore, the electro-reflective behavior of PEDOT layers can be described by the Drude model provided the electronic conductivity exceeds 90 S cm −1 . By several aspects, these films have thus a quasi-metallic behavior. Finally, the highest and lowest reflectivity obtained in the 8–20 µm range for these PEDOT layers is 67% and 21% respectively, which opens up interesting perspective in view of the elaboration of PEDOT-based devices with tunable IR electro-reflective properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. A novel electrophotographic system10.1364/AO.8.S1.000192 ↗
2. C.-G.Granqvist, Handbook of Inorganic Materials, Amsterdam, 1995.10.1016/B978-044489930-9/50027-1 ↗
3. Progress in chromogenics: New results for electrochromic and thermochromic materials and devices10.1016/j.solmat.2009.02.026 ↗
4. Electrochromic properties of WO3 as a single layer and in a full device: From the visible to the infrared10.1016/j.jpcs.2009.12.069 ↗
5. The effect of ferrocyanide on the performance of heptyl viologen-based electrochromic display devices10.1016/S0022-0728(97)00078-8 ↗
6. Efficient synthesis and properties of novel near-infrared electrochromic anthraquinone imides10.1021/ol703001s ↗
7. Electrochromic windows based on viologen-modified nanostructured TiO2 films10.1016/S0927-0248(98)00096-8 ↗
8. Spectroelectrochemical studies of manganese phthalocyanine thin films for applications in electrochromic devices10.1016/S0022-0728(02)00757-X ↗
9. Multicolored electrochromism in polymers: Structures and devices10.1021/cm049669l ↗
10. Rapid switching solid state electrochromic devices based on complementary conducting polymer films10.1002/adma.19960081008 ↗
11. Color control in pi-conjugated organic polymers for use in electrochromic devices10.1021/cr900129a ↗
12. Electrochromic materials and devices for energy efficient windows10.1016/0165-1633(84)90024-8 ↗
13. Electrochromic materials10.1039/cs9972600147 ↗
14. Organic electrochromic materials10.1016/S0013-4686(99)00046-8 ↗
15. Chromogenic smart materials10.1016/S1369-7021(04)00123-3 ↗
16. Influence of the film thickness and morphology on the colorimetric properties of spray-coated electrochromic disubstituted 3,4-propylenedioxythiophene polymers10.1021/am900431z ↗
17. Polypyrrole films electropolymerized from ionic liquids and in a traditional liquid electrolyte: A comparison of morphology and electro–optical properties10.1016/j.eurpolymj.2008.07.045 ↗
18. Electrochromic Contrast Enhancement of Nanostructured Poly(3,4-ethylenedioxythiophene)-Polystyrene Sulfonate Films by Composition/Morphology Control10.1166/jnn.2009.050 ↗
19. Poly(3,4-ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C ↗
20. Electrochemistry of Poly(3,4-alkylenedioxythiophene) Derivatives10.1002/adma.200300376 ↗
21. Electrochromic and highly stable poly(3,4-ethylenedioxythiophene) switches between opaque blue-black and transparent sky blue10.1016/0032-3861(94)90332-8 ↗
22. Infrared switching electroemissive devices based on highly conducting polymers10.1016/S0040-6090(99)00401-0 ↗
23. Infrared reflection of conducting polyaniline polymer coating10.1016/S0142-9418(01)00136-2 ↗
24. Study of the mechanism of the variable emissivity infrared electrochromic device based on polyaniline conducting polymer10.1016/j.synthmet.2011.11.002 ↗
25. Reflectance of conducting poly(3,4-ethylenedioxythiophene)10.1016/S0379-6779(99)00095-8 ↗
26. Microporous Patterned Electrodes for Color-Matched Electrochromic Polymer Displays10.1021/cm049951s ↗
27. Physical, chemical, theoretical aspects of conducting polymer electrochromics in the visible, IR and microwave regions10.1016/j.synthmet.2005.08.015 ↗
28. Wide band electrochromic displays based on thin conducting polymer films10.1016/S0013-4686(01)00392-9 ↗
29. Combined Visible and Infrared Electrochromism Using Dual Polymer Devices10.1002/1521-4095(200105)13:9<634::AID-ADMA634>3.0.CO;2-3 ↗
30. Self-supported semi-interpenetrating polymer networks for new design of electrochromic devices10.1016/j.electacta.2007.12.087 ↗
31. Thermal ageing of poly(ethylene oxide)/poly(3,4-ethylenedioxythiophene) semi-IPNs10.1016/j.eurpolymj.2008.07.050 ↗
32. New Prospects in the Conception of IR Electro-Tunable Devices: The Use of Conducting Semi-Interpenetrating Polymer Network Architecture10.1021/cm100736y ↗
33. Soft and flexible Interpenetrating Polymer Networks hosting electroreflective poly(3,4-ethylenedioxythiophene)10.1016/j.solmat.2014.03.036 ↗
34. Electropolymerization of 3, 4-ethylenedioxythiophene within an insulating nitrile butadiene rubber network: Application to electroreflective surfaces and devices10.1016/j.solmat.2011.07.004 ↗
35. Major Effect of Electropolymerization Solvent on Morphology and Electrochromic Properties of PEDOT Films10.1021/cm100561d ↗
36. The Morphology of Poly(3,4-Ethylenedioxythiophene)10.1080/15583724.2010.495440 ↗
37. Improvement of the Electrosynthesis and Physicochemical Properties of Poly(3,4-ethylenedioxythiophene) Using a Sodium Dodecyl Sulfate Micellar Aqueous Medium10.1021/la980909j ↗
38. Effect of the electropolymerisation conditions on the electrochemical, morphological and structural properties of PEDOTh films10.1007/s10008-008-0522-6 ↗
39. Study of poly(3,4-ethylenedioxythiophene) films prepared in propylene carbonate solutions containing different lithium salts10.1016/j.jelechem.2004.03.002 ↗
40. Versatile Superhydrophobic Surfaces from a Bioinspired Approach10.1021/ma200430n ↗
41. The effect of counter ions and substrate material on the growth and morphology of poly(3,4-ethylenedioxythiophene) films: Towards the application of enzyme electrode construction in biofuel cells10.1016/j.synthmet.2010.01.033 ↗
42. Study of PEDOT conductive polymer films by admittance measurements10.1016/j.matchemphys.2010.10.042 ↗
43. Morphology and conductivity of PEDOT layers produced by different electrochemical routes10.1016/j.synthmet.2013.12.013 ↗
44. Effects of polymerization potential on the properties of electrosynthesized PEDOT films10.1016/S0013-4686(03)00143-9 ↗
45. In situ conductivity studies of poly(3,4-ethylenedioxythiophene)10.1016/S0379-6779(98)80023-4 ↗
46. Optical, conductive and magnetic properties of electrochemically prepared alkylated poly(3,4-ethylenedioxythiophene)s10.1016/S0379-6779(00)00289-7 ↗
47. In situ conductivity measurements on polyethylenedioxythiophene derivatives with different counter ions10.1016/S0379-6779(01)00521-5 ↗
48. Handbook of Reference Electrodes
49. Measurement of Sheet Resistivities with the Four-Point Probe10.1002/j.1538-7305.1958.tb03883.x ↗
50. Redoping — A simple way to enhance the redoxcapacity of polypyrrole films10.1016/j.elecom.2010.06.013 ↗
51. Skotheim · 2007
52. Tezuka · Synth. Met. · 1989 · 30 · 36910.1016/0379-6779(89)90660-7 ↗
53. Moving front phenomena in the switching of conductive polymers10.1016/S0022-0728(97)00561-5 ↗
54. Influence of the local electric field on ionic transport during redox switching of conducting polymers10.1016/S0301-0104(00)00073-2 ↗
55. Electrochemical switching of conducting polymers: A variable resistance transmission line model10.1016/j.jelechem.2006.02.026 ↗
56. Moving Redox Fronts in Conjugated Polymers Studies from Lateral Electrochemistry in Polythiophenes10.1149/1.1649749 ↗
57. Modeling the effects of surface roughness on the emissivity of aluminum alloys10.1016/j.ijheatmasstransfer.2006.04.037 ↗
58. A ray-tracing analysis of the absorption of light by smooth and rough metal surfaces10.1063/1.2738417 ↗
59. Analysis of laser absorption on a rough metal surface10.1063/1.118242 ↗
60. Effect of surface roughness on optical heating of metals10.2971/jeos.2014.14004 ↗
61. Electromagnetic interactions with rough metal surfaces10.1016/0079-6816(95)00044-5 ↗
62. A. Maziz, Electronic Conducting Polymer Based Microactuators: Towards the Integration into Microsytems with New Manufacturing Processes, Cergy-Pontoise, 2014.
63. Inhomogeneous disorder and the modified Drude metallic state of conducting polymers10.1016/0379-6779(94)90176-7 ↗
64. Facteurs de réflexion et d’émission des métaux10.1051/jphys:01967002802023500 ↗
65. Polymeric Material with Metal-Like Conductivity for Next Generation Organic Electronic Devices10.1021/cm302899v ↗
66. Feasibility of conducting semi-IPN with variable electro-emissivity: A promising way for spacecraft thermal control10.1016/j.solmat.2011.06.017 ↗