journal article·2015-10

Work function and interface control of amorphous IZO electrodes by MoO3 layer grading for organic solar cells

Hyo-Joong Kim, Ki-Won Seo, Yong-Jin Noh, Seok-In Na, Ahrum Sohn, Dong-Wook Kim, Han-Ki Kim

Publisher page

Abstract

Abstract To control the work function and the interface of transparent anodes for use in organic solar cells (OSCs), we fabricated an amorphous Zn-doped In2O3 (IZO) films with graded MoO3 top layers by using a graded sputtering technique. Electrical, optical, structural, and morphological properties of the MoO3 graded IZO films (MIZO) were investigated in detail by studying MIZO films with various thickness of the MoO3 graded layer. Graded sputtering of the MoO3 layer on the top region of IZO films led to the high work function of 5.23 eV for the amorphous IZO, which was higher than that of the MoO3/IZO double layer, even though MIZO had resistivity similar to that of the IZO single layer. Due to the high work function and high transparency of the MIZO films, OSCs based on the MIZO anode exhibited a power conversion efficiency (PCE) of 3.2%, greater than that of OSCs based on IZO single layer and MoO3/IZO double layer anodes. Based on Kelvin probe measurements and transmission electron microscope examinations, we suggested a possible hole extraction mechanism at the interfaces between the MIZO anode and the PEDOT:PSS buffer layer to explain the higher PCE of OSCs based on MIZO anodes. The successful operation of OSCs on graded MIZO indicated that the graded sputtering technique is a promising coating process allowing modification of surface properties of amorphous IZO anodes without requiring additional solution coating processes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. 25th Anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
2. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
3. Polymer solar cells10.1038/nphoton.2012.11 ↗
4. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
5. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
6. Technological status of organic photovoltaics10.1016/j.solmat.2013.08.044 ↗
7. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
8. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
9. Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility10.1021/nn406020d ↗
10. ITO-based cathode for application in semitransparent organic photovoltaic cells10.1557/PROC-1013-Z02-08 ↗
11. Stable organic photovoltaics using Ag thin film andoes10.1039/c2jm15670a ↗
12. Analysis of the current–voltage characteristics of polymer-based organic light-emitting diodes (OLEDs) deposited by spin coating10.11144/javeriana.SC15-1.aotc ↗
13. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
14. Stable photovoltaic cells based on graphene oxide/indium zinc oxide bilayer anode buffer10.1016/j.orgel.2012.09.012 ↗
15. Transparent and flexible PEDOT:PSS electrodes passivated by thin IZTO film using plasma-damage free linear facing target sputtering for flexible organic solar cells10.1016/j.solmat.2012.10.015 ↗
16. PEDOT:PSS-free organic solar cells fabricated on buffer and anode integrated Ta-doped In2O3 films10.1016/j.solmat.2014.02.036 ↗
17. Rapid thermal annealed WO3-doped In2O3 films for transparent electrodes in organic photovoltaics10.1088/0022-3727/45/39/395104 ↗
18. Effect of Zr doping power on the electrical, optical and structural properties of In–Zr–O anodes for P3HT:PCBM thin-film organic solar cells10.1088/0022-3727/46/29/295305 ↗
19. Preparation and characterization of In2O3–TiO2 and V2O5/In2O3–TiO2 composite oxides for catalytic applications10.1016/S0926-860X(03)00157-1 ↗
20. Transparent and flexible amorphous In–Si–O films for flexible organic solar cells10.1063/1.4788687 ↗
21. Highly near-infrared transparent GeO2-doped In2O3 electrodes for bulk heterojunction organic solar cells10.1016/j.solmat.2012.07.016 ↗
22. Highly transparent and flexible InTiO/Ag nanowire/InTiO films for flexible organic solar cells10.1063/1.4891194 ↗
23. Charge-carrier mediated ferromagnetism in Mo-doped In2O3 films10.1063/1.4722928 ↗
24. Optical properties of ultrathin copper thin films sandwiched between Nb-doped TiO2 films studied with spectroscopic ellipsometry10.7567/JJAP.50.055805 ↗
25. Transparent conducting AZO cosputtered ITO anode films grown by a dual target DC magnetron sputtering for OLEDs10.1149/1.2976160 ↗
26. Investigation on the interface of GZO/ITO double-layered transparent conducting oxide films for solar cells
27. Rapid thermal annealing effect on the characteristics of ZnSnO3 films prepared by RF magnetron sputtering10.1016/j.cap.2012.05.014 ↗
28. Preparation and characterization of MoO3 hole-injection layer for organic solar cell fabrication and optimization10.1016/j.solmat.2013.10.002 ↗
29. Energy level evolution of molybdenum trioxide interlayer between indium tin oxide and organic semiconductor10.1063/1.3309600 ↗
30. The growth of ZnO on bcc-In2O3 buffer layers and the valence band offset determined by X-ray photoemission spectroscopy10.1016/j.ssc.2010.08.022 ↗
31. Growth and characterization of transparent conducting nanostructured zinc indium oxide thin films10.1016/j.tsf.2010.08.048 ↗
32. Electronic structures of MoO3-based charge heneration layer for tandem organic light-emitting diodes10.1063/1.3479477 ↗
33. Perfect anti-reflection from first principles10.1038/srep01062 ↗
34. Transparent, low resistance, and flexible amorphous ZnO-doped In2O3 anode grown on a PES substrate10.1149/1.2426800 ↗
35. Obsercation of space-charge-limited current due to charge generation at interface of molybdenum dioxide and organic layer10.1063/1.3267082 ↗
36. Metal oxides for interface engineering in polymer solar cells10.1039/c2jm33838f ↗
37. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
38. Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
39. Properties of interlayer for organic photovoltaics10.1016/j.mattod.2013.10.001 ↗