journal article·2015-10

Chemical changes in PCPDTBT:PCBM solar cells using XPS and TOF-SIMS and use of inverted device structure for improving lifetime performance

J. Kettle, H. Waters, Z. Ding, M. Horie, G.C. Smith

Publisher page

Abstract

Analysis of the degradation routes for poly[(4,4-bis(2-ethylhexyl)-cyclopenta-[2,1-b;3,4-b′]dithiophene)-2,6-diyl-alt-2,1,3-benzothiadiazole-4,7-diyl] (PCPDTBT)-based solar cells under illumination and in the presence of air have been conducted using a combination of X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOF-SIMS) and solar cell device data. After ageing, XPS studies show that PCPDTBT appears as an oxygen-containing polymer, with data indicating that a break-up in the aromatic rings, formation of sulphates at the thiophene ring, chain scission in the polymer backbone and also loss of side chains. XPS studies have also been conducted on Phenyl-C71-butyric acid methyl ester (PC71BM) films and show a breakage of the fullerene cage, loss of molecular shape and oxidation of carbon atoms in the fullerene cage and side chains after ageing. XPS studies on active layers blends of PCPDTBT and PCBM also show significant changes in the vertical composition during ageing, with increased enrichment of PCPDTBT observed at the top surface and that the use of a processing additive (ODT) has a negative impact on the morphological stability. Based on these studies, it is shown that inverted structures are better suited than non-inverted devices for PCPDTBT:PCBM solar cells. An additional advantage of inverted devices is shown using TOF-SIMS; electrode degradation during ageing experiments leads to migration of indium and tin ions into the active layer in non-inverted devices, but is eliminated for inverted devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Polymer Nanocomposite Synthesis and Irradiation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. P3HT: PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
2. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
3. Pd‐catalysed direct arylation polymerisation for synthesis of low‐bandgap conjugated polymers and photovoltaic performance10.1002/marc.201200368 ↗
4. Photo-oxidation and ozonization of poly(3-hexylthiophene) thin films as studied by UV/VIS and photoelectron spectroscopy10.1016/j.polymdegradstab.2010.02.004 ↗
5. Studies of degradation behaviors of poly(3‐hexylthiophene) layers by X‐ray photoelectron spectroscopy10.1002/sia.5557 ↗
6. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
7. Stability comparison: a PCDTBT/PC71BM bulk-heterojunction versus a P3HT/PC71BM bulk-heterojunction10.1016/j.solmat.2012.02.005 ↗
8. Oxygen‐ and water‐based degradation in [6, 6]‐Phenyl‐C61‐Butyric acid methyl ester (PCBM) films10.1002/aenm.201301272 ↗
9. Ultrapure C60 field-effect transistors and the effects of oxygen exposure10.1063/1.1883327 ↗
10. Optimisation of PCPDTBT solar cells using polymer synthesis with Suzuki coupling10.1016/j.solmat.2011.03.022 ↗
11. Bulk heterojunction bipolar field-effect transistors processed with alkane dithiol10.1016/j.orgel.2008.08.017 ↗
12. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
13. Structural order in bulk heterojunction films prepared with solvent additives10.1002/adma.201003690 ↗
14. Effect of processing additive 1,8-octanedithiol on the lifetime of PCPDTBT based Organic Photovoltaics10.1016/j.orgel.2014.06.031 ↗
15. Effect of crystallization on the electronic energy levels and thin film morphology of P3HT: PCBM blends10.1021/ma102841e ↗
16. Vertical phase separation in Poly(3‐hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗
17. Influence of the hole-transport layer on the initial behavior and lifetime of inverted organic photovoltaics10.1016/j.solmat.2010.12.036 ↗
18. Efficient inverted bulk-heterojunction solar cells from low-temperature processing of amorphous ZnO buffer layers10.1039/C4TA02276A ↗
19. Effect of indium and tin contamination on the efficiency and electronic properties of organic bulk hetero-junction solar cells10.1016/j.solmat.2011.07.012 ↗
20. Role of humidity on indium and tin migration in organic photovoltaic devices10.1039/c0cp02203a ↗