Origin of the tunable carrier selectivity of atomic-layer-deposited TiOx nanolayers in crystalline silicon solar cells
Source abstract
Abstract
Abstract Titanium oxide (TiOx) nanolayers grown by atomic layer deposition are investigated with respect to their application as carrier selective contacts for crystalline silicon (c-Si) solar cells. Although TiOx is known to act as an electron contact, in this work the selectivity of TiOx layers is found to be widely tunable from electron to hole selective depending on deposition conditions, post-deposition treatments, and work function of the metal electrode used. Using TiOx and an intrinsic hydrogenated amorphous silicon buffer layer, solar cell test structure exhibiting open-circuit voltages (Voc) as high as 720 and 650 mV are shown for electron and hole selective contacts, respectively. Surface photovoltage and capacitance-voltage measurements reveal that carrier selectivity is correlated with the amount of c-Si band bending induced by TiOx, which are governed not only by the effective work function difference at the Si/TiOx interface, but also by the negative fixed charge present in the TiOx layer. This new finding is in contrast to the previous model for carrier transport where selectivity is determined only by the asymmetric band offsets at the Si/contact interface. It highlights the influence of induced band bending to produce carrier depletion/inversion conditions, and the importance of its selectivity effect in a c-Si absorber.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Charge carrier separation in solar cells10.1109/JPHOTOV.2014.2363550 ↗
2. Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell10.1109/JPHOTOV.2014.2352151 ↗
3. Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%10.1038/nenergy.2017.32 ↗
4. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
5. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
6. Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells10.1016/j.solmat.2018.06.020 ↗
7. Hole selective MoOx contact for silicon solar cells10.1021/nl404389u ↗
8. Molybdenum and tungsten oxide: high work function wide band gap contact materials for hole selective contacts of silicon solar cells10.1016/j.solmat.2015.05.031 ↗
9. Transition metal oxides as hole-selective contacts in silicon heterojunctions solar cells10.1016/j.solmat.2015.08.028 ↗
10. Optically transparent and electrically conductive NiO window layer for Si solar cells10.1016/j.matlet.2016.03.074 ↗
11. Magnesium fluoride electron-selective contacts for crystalline silicon solar cells10.1021/acsami.6b03599 ↗
12. Conductive and stable magnesium oxide electron-selective contacts for efficient silicon solar cells10.1002/aenm.201601863 ↗
13. The role of a LiF layer on the performance of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/Si organic-inorganic hybrid solar cells
14. Hole-blocking titanium-oxide/silicon heterojunction and its application to photovoltaics10.1063/1.4803446 ↗
15. Titanium dioxide/silicon hole-blocking selective contact to enable double-heterojunction crystalline silicon-based solar cell10.1063/1.4916540 ↗
16. Silicon heterojunction solar cells with electron selective TiOx contact10.1016/j.solmat.2016.01.020 ↗
17. High-performance TiO2-based electron-selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
18. Stable dopant-free asymmetric heterocontact silicon solar cells with efficiencies above 20%10.1021/acsenergylett.7b01279 ↗
19. Passivating electron-selective contacts for silicon solar cells based on an a-Si:H/TiOx stack and a low work function metal10.1002/pip.3023 ↗
20. Industrially feasible, dopant-free, carrier-selective contacts for high-efficiency silicon solar cells10.1002/pip.2901 ↗
21. Fermi level depinning and contact resistivity reduction using a reduced titania interlayer in n-silicon metal-insulator-semiconductor ohmic contacts10.1063/1.4868302 ↗
22. A low resistance calcium/reduced titania passivated contact for high efficiency crystalline silicon solar cells10.1002/aenm.201602606 ↗
23. Investigation of atomic-layer-deposited TiOx as selective electron and hole contacts to crystalline silicon10.1016/j.egypro.2017.09.093 ↗
24. Passivating contacts for crystalline silicon solar cells10.1038/s41560-019-0463-6 ↗
25. Exploring co-sputtering of ZnO:Al and SiO2 for efficient electron-selective contacts on silicon solar cells10.1016/j.solmat.2019.02.005 ↗
26. Charge density in atmospheric pressure chemical vapor deposition TiO2 on SiO2-passivated silicon10.1149/1.3216029 ↗
27. Excellent c-Si surface passivation by low-temperature atomic layer deposited titanium oxide10.1063/1.4885096 ↗
28. Titanium oxide: a re-emerging optical and passivating material for silicon solar cells10.1016/j.solmat.2016.05.006 ↗
29. Sinton · 2000 · 1152
30. Contactless determination of current-voltage characteristics and minority-carrier lifetimes in semiconductors from quasi-steady-state photoconductance data10.1063/1.117723 ↗
31. Determination of surface properties by means of large signal photovoltage pulses and the influence of trapping10.1016/0039-6028(74)90128-9 ↗
32. Discerning passivation mechanisms at a-Si:H/c-Si interfaces by means of photoconductance measurements10.1063/1.3590254 ↗
33. Nicollian · 1982
34. Titanium isopropoxide as a precursor in atomic layer epitaxy of titanium dioxide thin films10.1021/cm00032a023 ↗
35. Passivation of boron-doped industrial silicon emitters by thermal atomic layer deposited titanium oxide10.1109/JPHOTOV.2015.2434596 ↗
36. Glunz · 2017 · 2064
37. Doped layer optimization for silicon heterojunctions by injection-level-dependent open-circuit voltage measurements10.1109/JPHOTOV.2013.2294757 ↗
38. Haynes · 2012
39. Surface potentials of magnetron sputtered transparent conducting oxides10.1016/j.tsf.2009.05.057 ↗
40. Effects of a-Si:H layer thicknesses on the performance of a‐Si:H∕c-Si heterojunction solar cells10.1063/1.2559975 ↗
41. Effective antireflection and surface passivation of silicon using a SiO2/a-TiOx film stack10.1109/JPHOTOV.2017.2753198 ↗
42. Sze · 2007
43. Schroder · 2006
44. Corona charge in SiO2: kinetics and surface passivation for high efficiency silicon solar cells10.1016/j.egypro.2016.07.090 ↗
45. Silicon surface passivation by atomic layer deposited Al2O310.1063/1.2963707 ↗
46. Bivour · 2017 · 348
47. Suppress carrier recombination by introducing defects: the case of Si solar cell
48. Efficient hole extraction for metal oxide based silicon heterojunction solar cells: a simulation study10.1109/JPHOTOV.2018.2793762 ↗
49. Atomic layer-deposited tunnel oxide stabilizes silicon photoanodes for water oxidation10.1038/nmat3047 ↗
50. Amorphous TiO₂ coatings stabilize Si, GaAs, and GaP photoanodes for efficient water oxidation10.1126/science.1251428 ↗