Correlation between carrier recombination and valence band offset effect of graded Cu(In,Ga)Se2 solar cells
Source abstract
Abstract
Abstract Carrier recombination in Cu(In,Ga)Se2 (CIGS) solar cells is one of the critical factors determining cell performance loss. Additionally, heterointerface recombination is the most detrimental recombination pathway based on the Shockley–Read–Hall mechanism. Various methods have been applied to impede interface recombination, and the introduction of a valence band offset (ΔEV) produced by a homogeneous Cu-deficient layer (CDL) has been proved to be effective for improving cell efficiency. However, the relationship between ΔEV and recombination processes has not yet been fully clarified. In this work, through a Se interval irradiation process, ΔEV was incorporated into CIGS solar cells with bandgap grading so as to explore the correlation between the ΔEV effect and heterointerface recombination, which was demonstrated by both SCAPS-1D simulation and experiment. Moreover, illumination-dependent open-circuit voltage (Suns–Voc) and temperature-dependent open-circuit voltage (Voc–T) measurements were performed to quantitatively estimate the recombination rates at the interface, in the space-charge region (SCR), and in the quasi-neutral region (QNR), contributing to elaboration of the mechanism by which ΔEV serves as a hole barrier at the interface, thereby reducing heterointerface recombination and enhancing cell performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Applications, the time for CIGS10.1002/pip.1010 ↗
2. CIGS‐based solar cells for the next millennium10.1002/(SICI)1099-159X(200001/02)8:1<151::AID-PIP302>3.0.CO;2-Q ↗
3. Copper indium gallium selenide based solar cells–a review10.1039/C7EE00826K ↗
4. Halide perovskite materials for solar cells: a theoretical review10.1039/C4TA05033A ↗
5. Cu(In,Ga)Se2 thin-film solar cells with an efficiency of 18%10.1016/S0927-0248(00)00300-7 ↗
6. Optical and recombination losses in thin-film Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2014.07.019 ↗
7. Wide bandgap Cu(In,Ga)Se2 solar cells with improved energy conversion efficiency10.1002/pip.2244 ↗
8. Cu(In,Ga)Se2 solar cell with Zn(S,O) as the buffer layer fabricated by a chemical bath deposition method10.1016/j.solener.2018.06.070 ↗
9. Cu(In,Ga)Se2 solar cells with controlled conduction band offset of window/Cu(In,Ga)Se2 layers10.1063/1.1366655 ↗
10. A new approach to high-efficiency solar cells by bandgap grading in Cu(In,Ga)Se2 chalcopyrite semiconductors10.1016/S0927-0248(00)00274-9 ↗
11. Control of valence band offset of Cu (In, Ga) Se2 solar cells with single-graded band profile10.7567/JJAP.56.062301 ↗
12. Effect of Cu-deficient layer formation in Cu(In,Ga)Se2 solar cell performance10.1002/pip.2972 ↗
13. Characterization of interface between accurately controlled Cu-deficient layer and Cu(In,Ga)Se2 absorber for Cu(In,Ga)Se2 solar cells10.1002/pssr.201800129 ↗
14. Growth mechanisms and diffusion in multinary and multilayer chalcopyrite thin films10.7567/JJAPS.32S3.57 ↗
15. Improvement of the electrical properties of Cu-poor CuInS2 thin films by sodium incorporation10.1143/JJAP.37.L1370 ↗
16. Applications, Accurate control and characterization of Cu depletion layer for highly efficient Cu(In,Ga)Se2 solar cells10.1002/pip.3077 ↗
17. Investigation of correlation between open-circuit voltage deficit and carrier recombination rates in Cu(In,Ga)(S,Se)2-based thin-film solar cells10.1063/1.5023828 ↗
18. Relationship between bandgap grading and carrier recombination for Cu(In,Ga)Se2-based solar cells10.7567/JJAP.57.08RC08 ↗
19. A recombination analysis of Cu(In,Ga)Se2 solar cells with low and high Ga compositions10.1016/j.solmat.2014.01.047 ↗
20. Interfacial quality improvement of Cu(In,Ga)Se2 thin film solar cells by Cu-depletion layer formation10.7567/APEX.9.092301 ↗
21. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
22. Reformulation of solar cell physics to facilitate experimental separation of recombination pathways10.1063/1.4819728 ↗
23. Anomalous grain boundary physics in polycrystalline CuInSe2: the existence of a hole barrier10.1103/PhysRevLett.91.266401 ↗
24. Compositionally induced valence-band offset at the grain boundary of polycrystalline chalcopyrites creates a hole barrier10.1063/1.2132537 ↗
25. Crystallographic and optical properties and band structures of CuInSe2, CuIn3Se5, and CuIn5Se8 phases in Cu-poor Cu2Se–In2Se3 pseudo-binary system10.7567/JJAP.55.04ES15 ↗
26. Examination of Cu-deficient layer on Cu(In,Ga)Se2 films fabricated by three-stage process for high-efficient solar cells10.1021/acsaem.9b00774 ↗