journal article·2019-02

Anisotropic thermal conductivity and photodriven phase change composite based on RT100 infiltrated carbon nanotube array

Qi Zhang, Jian Liu

Publisher page

Abstract

Abstract An anisotropic thermal conductivity phase change composite was successfully prepared. The carbon nanotube array(CNT array) is infiltrated byRT100. The as-prepared RT100/CNT array composite is determined by SEM and XRD and the results show that the RT100 is mostly encapsulated in the pores of CNT array. The DSC measurements indicate that the melting temperature and latent heat of the composite are 87.5 °C and 195.5 J g−1, respectively. The as-prepared composite shows 51-fold thermal conductivity enhancement as compared to RT100 and anisotropic thermal conductivity. The RT100/CNT array with anisotropic thermal conductivity could be used in specific application, such as the direct solar thermal storage systems. Further, the as-prepared PCM composite shows great thermal photo-driven performance when placed under the solar simulator. Hence, the RT100/CNT array has great potential in solar thermal utilization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. S. Mekhilef, R.S, Safari, A review on solar energy use in industries, 2011.10.1016/j.rser.2010.12.018 ↗
2. Emerging applications of phase-change materials (PCMs): teaching an old dog new tricks10.1002/anie.201305201 ↗
3. RT100/expand graphite composite phase change material with excellent structure stability, photo-thermal performance and good thermal reliability10.1016/j.solmat.2015.04.008 ↗
4. The experimental appraisement of the effect of energy storage on the performance of solar chimney using phase change material10.1016/j.solener.2018.05.001 ↗
5. Performance enhancement of solar absorption cooling systems using thermal energy storage with phase change materials10.1016/j.apenergy.2018.04.029 ↗
6. Study of a floor supply air conditioning system using granular phase change material to augment building mass thermal storage—heat response in small scale experiments10.1016/j.enbuild.2005.07.010 ↗
7. Preparation and thermal energy storage properties of paraffin/expanded graphite composite phase change material10.1016/j.apenergy.2011.10.014 ↗
8. Thermal energy storage characteristics of bentonite-based composite PCMs with enhanced thermal conductivity as novel thermal storage building materials10.1016/j.enconman.2016.02.078 ↗
9. Thermal conductivity improvement of stearic acid using expanded graphite and carbon fiber for energy storage applications10.1016/j.renene.2006.11.011 ↗
10. Thermal properties and thermal conductivity enhancement of composite phase change materials using myristyl alcohol/metal foam for solar thermal storage10.1016/j.solmat.2017.05.059 ↗
11. A new strategy for enhanced latent heat energy storage with microencapsulated phase change material saturated in metal foam10.1016/j.solmat.2017.06.037 ↗
12. Hybridizing graphene aerogel into three-dimensional graphene foam for high-performance composite phase change materials10.1016/j.ensm.2017.12.028 ↗
13. A novel CNT encapsulated phase change material with enhanced thermal conductivity and photo-thermal conversion performance10.1016/j.solmat.2018.04.034 ↗
14. Development of PCM/carbon-based composite materials10.1016/j.solmat.2012.06.014 ↗
15. Silica fume/capric acid-palmitic acid composite phase change material doped with CNTs for thermal energy storage10.1016/j.solmat.2017.12.036 ↗
16. Improvement of the thermal properties of Bio-based PCM using exfoliated graphite nanoplatelets10.1016/j.solmat.2013.05.038 ↗
17. Sebacic acid/CNT sponge phase change material with excellent thermal conductivity and photo-thermal performance10.1016/j.solmat.2017.11.019 ↗
18. A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites10.1016/j.apenergy.2015.08.019 ↗
19. Enhancement of thermal conductivity by the introduction of carbon nanotubes as a filler in paraffin/expanded perlite form-stable phase-change materials10.1016/j.enbuild.2017.05.037 ↗
20. A comparative study of myristic acid/bentonite and myristic acid/Eudragit L100 form stable phase change materials for thermal energy storage10.1016/j.solmat.2014.03.057 ↗
21. Preparation, characterization and thermal properties of fatty acid eutectics/bentonite/expanded graphite composites as novel form–stable thermal energy storage materials10.1016/j.solmat.2017.03.026 ↗
22. Evaluation of paraffin infiltrated in various porous silica matrices as shape-stabilized phase change materials for thermal energy storage10.1016/j.enconman.2018.06.002 ↗
23. Development and thermal performance of pumice/organic PCM/gypsum composite plasters for thermal energy storage in buildings10.1016/j.solmat.2015.12.034 ↗
24. Ballistic carbon nanotube field-effect transistors10.1038/nature01797 ↗
25. Electrical and thermal transport properties of magnetically aligned single wall carbon nanotube films10.1063/1.127079 ↗
26. Mechanical and thermal properties of carbon nanotubes10.1016/0008-6223(95)00021-5 ↗
27. From anisotropic graphene aerogels to electron-and photo-driven phase change composites10.1039/C6TA07587H ↗
28. RT100/expand graphite composite phase change material with excellent structure stability, photo-thermal performance and good thermal reliability10.1016/j.solmat.2015.04.008 ↗
29. Enhancement of thermal interface materials with carbon nanotube arrays10.1016/j.ijheatmasstransfer.2005.09.039 ↗