journal article·2018-06

Thickness dependent surface roughness of sputtered Li2.5TaOx ion conductor and its effect on electro-optical performance of inorganic monolithic electrochromic device

Yu Xiao, Guobo Dong, Junji Guo, Qirong Liu, Qingjiao Huang, Qianqian Zhang, Xiaolan Zhong, Xungang Diao

Publisher page

Abstract

Abstract Transparent amorphous Li2.5TaOx thin films with different thicknesses were deposited by RF magnetron sputtering. The ionic conductivities of as-deposited films determined by ac impedance spectroscopy were of the order of 10−8 S/cm at room temperature. The surface roughness increased rapidly with the film thickness increasing as confirmed by scanning electron microscopy and atomic force microscopy. Inorganic monolithic electrochromic devices (ECDs) based on WO3//NiO complementary structure were fabricated using the Li2.5TaOx with different thicknesses as the ion conductor layers. The electro-optical performance of the ECDs was characterized by cyclic voltammetry and chronoamperometry. The ECDs showed a highest optical modulation of 40% at 550 nm driven by − 1.5 V (coloration) and 1 V (bleaching) with switching time of 30 s. Both the amount of transferred charge and coloration efficiency were found to be highly dependent on the film thickness of Li2.5TaOx layer. The high charge transfer resistance at the Li2.5TaOx/WO3 interface and poor growth of WO3 layer due to the high surface roughness of Li2.5TaOx may well account for the decreased device performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Oxide electrochromics: an introduction to devices and materials10.1016/j.solmat.2011.08.021 ↗
2. Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
3. Room temperature processing for solid-state electrochromic devices on single substrate: from glass to flexible plastic10.1016/j.solmat.2016.06.029 ↗
4. All inorganic thin film electrochromic device using LiPON as the ion conductor10.1016/j.solmat.2015.06.052 ↗
5. A simplified all-polymer flexible electrochromic device10.1016/j.electacta.2004.03.032 ↗
6. Electrochromic materials and devices for energy efficient windows10.1016/0165-1633(84)90024-8 ↗
7. Progress toward durable, cost effective electrochromic window glazings10.1016/S0927-0248(98)00141-X ↗
8. An all-solid-state electrochromic device based on NiO/WO3 complementary structure and solid hybrid polyelectrolyte10.1016/j.solmat.2009.06.025 ↗
9. Electrochromic coatings-applications and manufacturing issues10.1016/S0040-6090(98)01429-1 ↗
10. Transparent conductors as solar energy materials: a panoramic review10.1016/j.solmat.2007.04.031 ↗
11. Opportunities and challenges in science and technology of WO3 for electrochromic and related applications10.1016/j.solmat.2007.01.026 ↗
12. Crystalline WO3 nanoparticles for highly improved electrochromic applications10.1002/adma.200501953 ↗
13. Electrochromics for smart windows: thin films of tungsten oxide and nickel oxide, and devices based on these10.1039/B612174H ↗
14. Improved electrochromic performances of NiO based thin films by lithium addition: from single layers to devices10.1016/j.electacta.2012.03.123 ↗
15. Electrochromic nickel oxide films and their compatibility with potassium hydroxide and lithium perchlorate in propylene carbonate: optical, electrochemical and stress-related properties10.1016/j.tsf.2014.07.004 ↗
16. LiPON thin films with high nitrogen content for application in lithium batteries and electrochromic devices prepared by RF magnetron sputtering10.1016/j.ssi.2015.09.022 ↗
17. Studies of ZrO2 electrolyte thin-film thickness on the all-solid thin-film electrochromic devices10.1007/s10008-014-2600-2 ↗
18. A monolithic thin-film electrochromic window10.1016/0167-2738(92)90438-U ↗
19. Variable transmittance coatings using electrochromic lithium chromate and amorphous WO3 thin films10.1149/1.1837513 ↗
20. Durability of electrochromic glazing10.1016/S0927-0248(98)00140-8 ↗
21. A note on fast protonic solid state electrochromic device: NiOx/Ta2O5/WO3−x10.1016/j.solmat.2006.07.003 ↗
22. Eliminating degradation and uncovering ion-trapping dynamics in electrochromic WO3 thin films10.1038/nmat4368 ↗
23. Investigation of interfacial resistance between LiCoO2 cathode and LiPON electrolyte in the thin film battery10.1016/j.jpowsour.2006.04.042 ↗
24. Impedance spectroscopic study of the charge transfer resistance at the interface between a LiNi0.5Mn1.5O4 high-voltage cathode film and a LiNbO3 coating film10.1016/j.ssi.2016.01.031 ↗
25. Reduction of charge-transfer resistance at the solid electrolyte–electrode interface by pulsed laser deposition of films from a crystalline Li2PO2N source10.1016/j.jpowsour.2016.02.034 ↗
26. Resonant Raman of O–H/O–D vibrations and photoluminescence studies in LiTaO3 thin film10.1063/1.2966693 ↗
27. Correlation of silica glass properties with the infrared spectra10.1016/S0022-3093(96)00542-X ↗
28. Structural properties and phase transformation of sol–gel prepared lanthanum tantalates10.1007/s10853-014-8552-1 ↗
29. Optical properties of amorphous tungsten oxide films: effect of stoichiometry10.1088/1742-6596/100/8/082023 ↗