Impact of front-side point contact/passivation geometry on thin-film solar cell performance
Source abstract
Abstract
In this work, we perform an extensive campaign of three-dimensional numerical simulations of CIGS solar cell structures to investigate the effect of a surface-passivated CIGS with point contacts openings on the cell performance parameters (Jsc, Voc, FF and η). Detailed analysis of the combination of passivation thickness, point contact size and pitch is performed under the hypothesis of highly defective CIGS front surface and ideal chemical passivation: efficiencies close to the case of ideal (i.e., defect-free) CdS/CIGS interface can be achieved by optimized nanometer-scale point contact arrays. To account for field-effect passivation due to positive residual charge density, Qf, within the passivation layer, we vary Qf in the range 1010–1013 cm−2 under the two extreme scenarios of ideal or ineffective chemical passivation. Several examples of CIGS cells with different buffer layers (CdS, ZnO, ZnMgO, In2S3, Zn(O, S)) are also analyzed. We find that a positive Qf in the interval 1012– 5·1012 cm−2 can help completely recover the ideal cell efficiency, irrespective of the chemical passivation effect and even in the presence of unfavorable conduction band alignment at the buffer/CIGS heterojunction. This may help devising solutions with buffer materials alternative to CdS, boosting the performance of otherwise surface-limited cells. The effect of grain boundary defect density and position with respect to point contacts is also addressed, with a grain dimension of 750 nm.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
2. Effects of heavy alkali elements in Cu(In,Ga)Se 2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
3. K. Rui, Y. Takeshi, A. Shunsuke, H. Atsushi, F.T. Kong, K. Takuya, S. Hiroki, New world record Cu(In,Ga)(Se,S)2 thin film solar cell efficiency beyond 22%, in: Proceedings of the IEEE 43th Photovolt. Spec. Conference PVSC 2016 Portland(OR) USA, June 2016, pp. 3–7.
4. Characterisation and modelling of chalcopyrite solar cells10.1016/S0040-6090(00)01736-3 ↗
5. Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation10.1016/S0927-0248(00)00266-X ↗
6. Electronic properties of CuGaSe2-based heterojunction solar cells. Part I. Transport analysis10.1063/1.371903 ↗
7. Activation energy of heterojunction diode currents in the limit of interface recombination10.1063/1.3126523 ↗
8. Features of KF and NaF postdeposition treatments of Cu(In,Ga)Se 2 absorbers for high efficiency thin film solar cells10.1021/acs.chemmater.5b02335 ↗
9. Buffer layers and transparent conducting oxides for chalcopyrite Cu(In,Ga)(S,Se)2 based thin film photovoltaics: present status and current developments10.1002/pip.955 ↗
10. Cu(In,Ga)Se2 thin film solar cells with a combined ALD-Zn(O,S) buffer and MOCVD-ZnO:B window layers10.1016/j.solmat.2013.05.052 ↗
11. M. Nakamura, N. Yoneyama, K. Horiguchi, Y. Iwata, K. Yamaguchi, H. Sugimoto, T. Kato, Recent R&D progress in solar frontier’s small-sized Cu(InGa)(SeS)2 solar cells, in: Proceedings of the IEEE 40th Photovolt. Spec. Conference PVSC, 2014, pp. 107–110. 10.1109/PVSC.2014.6925346.10.1109/PVSC.2014.6925346 ↗
12. The effect of Zn1-xSnxOy buffer layer thickness in 18.0% efficient Cd-free Cu(In,Ga)Se2 solar cells10.1002/pip.2239 ↗
13. On the CdS/CuInSe2 conduction band discontinuity10.1063/1.115523 ↗
14. What limits the efficiency of chalcopyrite solar cells?10.1016/j.solmat.2010.12.014 ↗
15. Advanced PERC and PERL production cells with 20.3% record efficiency for standard commercial p-type silicon wafers10.1002/pip.2178 ↗
16. Development of rear surface passivated Cu(In,Ga)Se2 thin film solar cells with nano-sized local rear point contacts10.1016/j.solmat.2013.07.025 ↗
17. ZnS nanodot film as defect passivation layer for Cu(In,Ga)(S,Se) 2 thin-film solar cells deposited by Spray-ILGAR (ion-layer gas reaction)10.1002/aenm.201100146 ↗
18. Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells10.1116/1.4728205 ↗
19. Effective passivation of Si surfaces by plasma deposited SiOx/a-SiNx:H stacks10.1063/1.3595940 ↗
20. Electrical characterization of ALD Al203 - Hf02 and PECVD Al203 passivation layers for p-type CZ-Silicon PERC solar cells
21. On the control of the fixed charge densities in Al2O3-based silicon surface passivation schemes10.1021/acsami.5b06606 ↗
22. Improved rear surface passivation of Cu(In,Ga)Se solar cells: a combination of an Al2O3 rear surface passivation layer and nanosized local rear point contacts10.1109/JPHOTOV.2013.2287769 ↗
23. Surface passivation of Cu(In,Ga)Se2 using atomic layer deposited Al2O310.1063/1.3675849 ↗
24. Three-dimensional simulations of a thin film heterojunction solar cell with a point contact/defect passivation structure at the heterointerface10.1063/1.3233962 ↗
25. Point contacts at the copper-indium-gallium-selenide interface – a theoretical outlook10.1063/1.4947267 ↗
26. Alkali-templated surface nanopatterning of chalcogenide thin films: a novel approach toward solar cells with enhanced efficiency10.1021/acs.nanolett.5b00584 ↗
27. G. Sozzi, D. Pignoloni, R. Menozzi, F. Pianezzi, P. Reinhard, B. Bissig, S. Buecheler, A.N. Tiwari, Designing CIGS solar cells with front-side point contacts, in: Proceedings of IEEE 42nd Photovolt. Spec. Conference, IEEE, 2015, pp. 1–5. 10.1109/PVSC.2015.7355691.10.1109/PVSC.2015.7355691 ↗
28. Numerical simulation of carrier collection and recombination at grain boundaries in Cu ( In , Ga ) Se2 solar cells
29. G. Sozzi, R. Mosca, M. Calicchio, R. Menozzi, Anomalous dark current ideality factor (n >2) in thin-film solar cells: The role of grain-boundary defects, in: Proceedings of the IEEE 40th Photovolt. Spec. Conference PVSC 2014, 2014, 10.1109/PVSC.2014.6925252.10.1109/PVSC.2014.6925252 ↗
30. Synopsys TCAD, 〈http://www.synopsys.com/Tools/TCAD/Pages/default.aspx〉.
31. G. Sozzi, S. Di Napoli, R. Menozzi, R. Carron, E. Avancini, B. Bissig, S. Buecheler, A.N. Tiwari, Analysis of Ga grading in CIGS absorbers with different Cu content, in: Proceedings of the IEEE 43rd Photovolt. Spec. Conference, IEEE, 2016, pp. 2279–2282. 10.1109/PVSC.2016.7750042.10.1109/PVSC.2016.7750042 ↗
32. Impact of compositional grading and overall Cu deficiency on the near-infrared response in Cu(In, Ga)Se2 solar cells10.1002/pip.2850 ↗
33. Quantitative assessment of optical gain and loss in submicron-textured CuIn1-xGaxSe2 solar cells fabricated by three-stage coevaporation10.1103/PhysRevApplied.2.034012 ↗
34. Towards an electronic model for CuIn1−xGaxSe2 solar cells10.1016/j.tsf.2011.01.092 ↗
35. Energy gap and band alignment for (HfO2)(Al2O3)1−x on (100) Si10.1063/1.1492024 ↗
36. Intrinsic DX centers in ternary chalcopyrite semiconductors10.1103/PhysRevLett.100.016401 ↗
37. Light- and bias-induced metastabilities in Cu(In,Ga)Se[sub 2] based solar cells caused by the (V[sub Se]-V[sub Cu]) vacancy complex10.1063/1.2388256 ↗
38. Reinterpretation of defect levels derived from capacitance spectroscopy of CIGSe solar cells10.1016/j.tsf.2008.10.092 ↗
39. On the combined effects of window/buffer and buffer/absorber conduction-band offsets, buffer thickness and doping on thin-film solar cell performance10.1016/j.solmat.2013.10.037 ↗
40. Investigating the electronic properties of Al2O3/Cu(In,Ga)Se2 interface10.1063/1.4932512 ↗
41. F. Troni, G. Sozzi, R. Menozzi, A numerical study of the design of ZnMgO window layer for Cadmium-free thin-film CIGS solar cells, in: 7th Conference Ph.D. Res. Microelectron. Electron. PRIME 2011 - Conference Proceedings, 2011, pp. 193–196. 10.1109/PRIME.2011.5966250.10.1109/PRIME.2011.5966250 ↗
42. Study on ALD In2S3Cu(In,Ga)Se-2 interface formation10.1002/pip.595 ↗
43. Efficiency limitations for wide-band-gap chalcopyrite solar cells10.1016/j.tsf.2004.11.018 ↗
44. Atomic layer deposition of Zn1-xMgxO buffer layers for Cu(In,Ga)Se2 solar cells10.1002/pip.733 ↗
45. Band gap tuning of ZnO/In2S3 core/shell nanorod arrays for enhanced visible-light-driven photocatalysis10.1021/jp310495j ↗
46. Zn(O,S) buffer layers by atomic layer deposition in Cu(In,Ga)Se2 based thin film solar cells: band alignment and sulfur gradient10.1063/1.2222067 ↗
47. Strong valence-band offset bowing of ZnO1-xSx enhances p-type nitrogen doping of ZnO-like alloys10.1103/PhysRevLett.97.146403 ↗
48. X. Li, A. Kanevce, J.V. Li, I. Repins, B. Egaas, R. Noufi, Impact of Zn1-XMnXO on Cu(In,Ga)Se2 thin-film solar cells, Conference Rec. IEEE Photovolt. Spec. Conference, 2009, pp. 000305–000308. 10.1109/PVSC.2009.5411675.10.1109/PVSC.2009.5411675 ↗
49. G. Sozzi, R.Menozzi, N. Cavallari, M. Bronzoni, F. Annoni, M. Calicchio, M. Mazzer, On the temperature behavior of shunt-leakage currents in Cu(In,Ga)Se2 solar cells: the role of grain boundaries and rear Schottky contact, in: Proceedings of the IEEE 42nd Photovolt. Spec. Conference PVSC 2015, 2015, 10.1109/PVSC.2015.7355779.10.1109/PVSC.2015.7355779 ↗
50. G. Sozzi, F. Troni, R. Menozzi, Numerical analysis of the effect of grain size and defects on the performance of CIGS solar cells, CS MANTECH Conference May 17th-20th, 2010, Portland, Oregon, USA, 2010, pp. 353–356.
51. F. Troni, F. Dodi, G. Sozzi, R. Menozzi, Modeling of thin-film Cu(In,Ga)Se2 solar cells, in: International Conference Simul. Semicond. Process. Devices, SISPAD, 2010, 10.1109/SISPAD.2010.5604580.10.1109/SISPAD.2010.5604580 ↗
52. Compositionally induced valence-band offset at the grain boundary of polycrystalline chalcopyrites creates a hole barrier10.1063/1.2132537 ↗
53. On microscopic compositional and electrostatic properties of grain boundaries in polycrystalline CuIn1-xGaxSe210.1116/1.2209995 ↗
54. Large neutral barrier at grain boundaries in chalcopyrite thin films10.1103/PhysRevLett.104.196602 ↗