Sputtered Si3N4 and SiO2 electron barrier layer between a redox electrolyte and the WO3 film in electrochromic devices
Source abstract
Abstract
Abstract The application of a redox electrolyte in hybrid type electrochromic devices allows a high charge capacity, thereby a high optical contrast can be achieved. However, the current between the redox electrolyte and the electrochromic layer (tungsten oxide, WO3) interface in equilibrium at colored state of device is critical for a window with large area. This loss current should be maintained below 10 μA/cm2 to avoid an inhomogeneous coloration of a large window caused by an ohmic voltage drop in transparent conductive oxide (TCO). The power consumption of such a loss current can be neglected. In this regard, we have investigated silicon nitride (Si3N4) and silicon oxide (SiO2) films as an intermediate electronic barrier layer on the top of the WO3 with thicknesses of 12, 35, 80 and 180 nm. These films were coated by direct current reactive magnetron sputtering technique. The electron barrier properties were studied for the iodide/triiodide ( I − / I 3 − ) and tetramethylthiourea/tetramethylformaminium disulfide dication (TMTU/TMFDS2+) redox couples for application in electrochromic devices. For both redox couples, Si3N4 showed an effective electronic barrier layer. The thickness of 80 nm of Si3N4 reduced the loss current from 240 down to 20 μA/cm2 for the I − / I 3 − redox electrolyte with the visual (solar) transmission from 45% (33%)down to 0.7% (0.5%)at 1 V.Similarly, the loss current was reduced from 70 down to 7 μA/cm2with the visual (solar) transmission from 71% (54.5%) down to 3% (2%) for TMTU/TMFDS2+ redox electrolyte. However no significant reduction of loss circuit current was achieved with SiO2 barrier layer for both redox couples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Transition Metal Oxide Nanomaterials · Conducting polymers and applications · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
2. Granqvist · 1995
3. Electrochromic device with a redox electrolyte10.1016/j.solmat.2009.02.009 ↗
4. The role of water in gasochromic WO3 films10.1016/S0040-6090(00)01865-4 ↗
5. The gasochromic colouration of sputtered WO3 films with a low water content10.1016/S0013-4686(01)00416-9 ↗
6. Preparation and characterisation of nano-structured WO3-TiO2 layers for photoelectrochromic devices10.1007/s10971-005-4794-3 ↗
7. New photoelectrochromic device10.1016/S0013-4686(01)00391-7 ↗
8. A. Georg, A. Georg, U. Opara Krašovec, V. Wittwer, Sixth International Meeting on Electrochromism, August 29th - September 2nd, 2004, in: j. Vondrák, V. Novák, J. Reiter (Eds.) sixth International Meeting on Electrochromism, 2004, pp. 146–149.
9. P.M. Allemand, R.F. Grimes, A.R. Ingle, J.P. Cronin, S.R. Kennedy, A. Agrawal, J.M. Boulton, Electrochromic Devices, in, Google Patents, 2001.
10. Tetramethylthiourea (TMTU) as an alternative redox mediator for electrochromic devices10.1016/j.solmat.2016.07.023 ↗
11. Evaluation of electrochromic windows impact in the energy performance of buildings in Mediterranean climates10.1016/j.enpol.2013.07.038 ↗
12. Diffusion in the electrolyte and charge-transfer reaction at the platinum electrode in dye-sensitized solar cells10.1016/S0013-4686(01)00540-0 ↗
13. Performance of a solid-state photoelectrochromic device10.1016/j.solmat.2004.01.043 ↗
14. Kinetics and mechanisms of electrochemical reactions on platinum with solutions of iodine-sodium iodide in acetonitrile10.1016/0013-4686(69)85005-X ↗
15. Non-corrosive, non-absorbing organic redox couple for dye-sensitized solar cells10.1002/adfm.201000150 ↗
16. The dependence of the chemical potential of WO3 films on hydrogen insertion10.1016/S0927-0248(01)00034-4 ↗
17. TMTU as alternative redox couple for electrochromic and photoelectrochromic devices
18. Comparison of electrical conductivity and optical properties of substoichiometrically and electrochemically coloured WOx films of different crystallinity10.1016/S0927-0248(97)00255-9 ↗
19. Thermal stability of nonstoichiometric silicon nitride films made by reactive dc magnetron sputter deposition10.1016/S0040-6090(97)00512-9 ↗
20. Properties of magnetron-sputtered silicon nitride films10.1149/1.2115444 ↗
21. Deposition of silicon nitride thin films by RF magnetron sputtering: a material and growth process study10.1016/j.optmat.2011.09.012 ↗
22. Trapping centres in sputtered SiO2 films10.1016/0040-6090(79)90386-9 ↗
23. Properties of radio frequency magnetron sputtered silicon dioxide films10.1016/0169-4332(96)00103-1 ↗
24. Phase transitions of the WO3 layer in photoelectrochromic devices
25. Theory and measurement of the change in chemical potential of hydrogen in amorphous HxWO3 as a function of the stoichiometric parameter x10.1016/0038-1098(76)90357-4 ↗