journal article·2012-05

A comparative study of silicon surface passivation using ethanolic iodine and bromine solutions

Neha Batra, Vandana, Sanjai Kumar, Mukul Sharma, S.K. Srivastava, Pooja Sharma, P.K. Singh

Publisher page

Abstract

Abstract We report the surface passivation studies made on p-type single-crystalline silicon wafers using ethanolic solution of iodine and bromine. Minority carrier lifetime (τeff) is measured by the microwave photoconductance decay (μ-PCD) method and using a Sinton's lifetime tester. Measurements are carried out at different molar concentrations of iodine–ethanol (I–E) and bromine–ethanol (B–E) solutions to optimize the process parameters. It is found that good passivation (±5% of measured maximum lifetime) could be achieved for certain ranges of concentration, which in the case of I–E and B–E are 0.07–0.12 M and 0.05–0.07 M, respectively. The effect of pre-conditioning steps on surface passivation (silicon surfaces with and without native oxide) is investigated. It is shown that the quality of surface passivation can be improved by an optimized wet-chemical pre-conditioning treatment. The effect of bias light and passivation time is also studied. I–E solution provides better passivation than B–E solution in terms of τeff whereas B–E solution passivation exhibits better stability in comparison with I–E solution. The τeff measured by the Sinton method (WCT-120) and using a Semilab system (μ-PCD, WT-2000) are comparable if injection levels are matched.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and devices · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. In situ bulk lifetime measurement on silicon with a chemically passivated surface10.1016/0169-4332(93)90112-O ↗
2. Effect of surface passivation on generation and recombination lifetimes in silicon wafer studied by impedance spectroscopy
3. Bulk carrier lifetime measurement by the microwave reflectance photoconductivity decay method with external surface electric field10.1063/1.1483114 ↗
4. R.A. Sinton, Andres Cuevas, Michael Stuckings, Quasi-steady-state photoconductance, a new method for solar cell material and device characterization, in: Proceedings of the 25th IEEE Photovoltaic Specialist Conference, 0-7803-3166-4/96, 1996, pp. 457–460.
5. Very low bulk and surface recombination in oxidized silicon wafers10.1088/0268-1242/17/1/306 ↗
6. Effectiveness of 0.08 molar iodine in ethanol solution as a means of chemical surface passivation for photoconductance decay measurements10.1016/S0927-0248(96)00061-X ↗
7. Wet chemical surface passivation of germanium wafers by quinhydrone–methanol treatment for minority carrier lifetime measurements10.1143/APEX.2.105501 ↗
8. High effective minority carrier lifetime on silicon substrates using quinhydrone–methanol passivation
9. A. Laades, J. Brauer, U. Stürzebecher, K. Neckermann, K. Klimm, M. Blech, K. Lauer, A. Lawerenz, H. Angermann, Wet-chemical treatment of solar grade Cz silicon prior to surface passivation, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2009, pp. 1640–1644.
10. The minority carrier lifetime values provided by the material supplier are generally measured on silicon block/ingot, which are different from the values obtained with the wafers (both with and without surface passivation).
11. Electronic passivation of silicon surfaces by halogens10.1007/BF02671234 ↗
12. Atomic-scale mechanistic study of iodine/alcohol passivated Si(100)