journal article·2013-10

All-solution-processed organic solar cells with conventional architecture

Jacobus J. van Franeker, W.Pim Voorthuijzen, Harrie Gorter, Koen H. Hendriks, René A.J. Janssen, Afshin Hadipour, Ronn Andriessen, Yulia Galagan

Publisher page

Abstract

All-solution processed organic solar cells with a conventional device structure were demonstrated. The evaporated low work function LiF/Al electrode was replaced by a printed high work function silver electrode combined with an additional electron transport layer (ETL). Two electron transport layers were tested: (I) zinc oxide (ZnO) nanoparticles and (II) poly[(9,9-bis(3'-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9–dioctylfluorene)] (PFN). Devices with printed silver nanoparticle inks on top of the ZnO electron transport layer lead to crack formation in the silver layer during the drying and sintering. The crack formation was avoided by using PFN as electron transport layer. The sputtered high work function ITO electrode was substituted by a printed composite electrode containing inkjet-printed silver grids in combination with high conductivity poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS). All-solution processed solar cells demonstrated a power conversion efficiency of 1.94%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. C. Breyer, A. Gerlach, D. Schäfer, J. Schmid, Fuel-parity: New very large and sustainable market segments for PV systems, in: Energy Conference and Exhibition (EnergyCon), 2010 IEEE International, 2010, pp. 406–411.10.1109/ENERGYCON.2010.5771714 ↗
2. Technology development for roll-to-roll production of organic photovoltaics10.1016/j.cep.2010.07.012 ↗
3. Roll-to-roll processed polymer tandem solar cells partially processed from water10.1016/j.solmat.2011.08.025 ↗
4. Simultaneous multilayer formation of the polymer solar cell stack using roll-to-roll double slot-die coating from water10.1016/j.solmat.2011.08.026 ↗
5. All printed transparent electrodes through an electrical switching mechanism: a convincing alternative to indium-tin-oxide, silver and vacuum10.1039/c2ee23244h ↗
6. New low-bandgap materials with good stabilities and efficiencies comparable to P3HT in R2R-coated solar cells10.1002/aenm.201100517 ↗
7. F.C. Krebs, J. Fyenbo, D.M. Tanenbaum, S.A. Gevorgyan, R. Andriessen, B. Van Remoortere, Y. Galagan, M. Jørgensen, The OE-A OPV demonstrator anno domini 2011, Energy & Environmental Science 4 (2011) 4116-4123.10.1039/c1ee01891d ↗
8. Evaluation of ink-jet printed current collecting grids and busbars for ito-free organic solar cells10.1016/j.solmat.2012.04.039 ↗
9. ITO-free flexible organic solar cells with printed current collecting grids10.1016/j.solmat.2010.08.011 ↗
10. Current collecting grids for ito-free solar cells10.1002/aenm.201100552 ↗
11. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
12. An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules10.1016/j.solmat.2011.01.010 ↗
13. Printed metal back electrodes for R2R fabricated polymer solar cells studied using the LBIC technique10.1016/j.solmat.2010.11.007 ↗
14. A laboratory scale approach to polymer solar cells using one coating/printing machine, flexible substrates, no ito, no vacuum and no spincoating10.1016/j.solmat.2012.09.008 ↗
15. J. Perelaer, R. Abbel, M. Layani, M. Grouchko, S. Magdassi, U.S. Schubert, Combined sintering approaches for fast sintering of inkjet printed nanoparticles for R2R applications, International Conference on Digital Printing Technologies (2011) 193-196.10.1557/opl.2012.90 ↗
16. Roll-to-roll compatible sintering of inkjet printed features by photonic and microwave exposure: from non-conductive ink to 40% bulk silver conductivity in less than 15s10.1002/adma.201104417 ↗
17. Effect of metal electrodes on the performance of polymer: fullerene bulk heterojunction solar cells10.1063/1.1782252 ↗
18. Cathode dependence of the open-circuit voltage of polymer: fullerene bulk heterojunction solar cells
19. Interface materials for organic solar cells10.1039/b921624c ↗
20. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
21. The role of buffer layers in polymer solar cells10.1039/C0EE00273A ↗
22. Double and triple junction polymer solar cells processed from solution10.1063/1.2719668 ↗
23. A facile route to inverted polymer solar cells using a precursor based zinc oxide electron transport layer10.1016/j.orgel.2010.06.002 ↗
24. Enhanced diode characteristics of organic solar cells using titanium suboxide electron transport layer10.1063/1.3409116 ↗
25. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
26. Utilization of water/alcohol-soluble polyelectrolyte as an electron injection layer for fabrication of high-efficiency multilayer saturated red-phosphorescence polymer light-emitting diodes by solution processing10.1063/1.2358942 ↗
27. Water/alcohol soluble conjugated polymers as highly efficient electron transporting/injection layer in optoelectronic devices10.1039/b907991m ↗
28. Self-assembly of ZnO: from nanodots to nanorods10.1002/1521-3773(20020402)41:7<1188::AID-ANIE1188>3.0.CO;2-5 ↗
29. Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells10.1021/jp050745x ↗
30. Synthesis, photophysics, and electroluminescence of high-efficiency saturated red light-emitting polyfluorene-based polyelectrolytes and their neutral precursors10.1039/b503920g ↗
31. E.W. Lam, H. Li, M.A. Schmidt, Silver nanoparticle structures realized by digital surface micromachining, in: Solid-State Sensors, Actuators and Microsystems Conference, 2009. TRANSDUCERS 2009. International 2009, pp. 1698–1701.10.1109/SENSOR.2009.5285759 ↗
32. Avoiding cracks in nanoparticle films10.1021/nl302555k ↗
33. Printable anodes for flexible organic solar cell modules10.1016/j.tsf.2003.11.038 ↗
34. Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymer–fullerene solar cells10.1016/j.solmat.2011.09.059 ↗
35. Origin of the efficiency improvement in pre-annealed P3HT/PCBM solar cells with LiF/Al electrodes10.1016/j.cplett.2012.10.006 ↗
36. Temperature-dependent morphology evolution of P3HT:PCBM blend solar cells during annealing processes10.1016/j.synthmet.2012.10.012 ↗
37. The effect of bias light on the spectral responsivity of organic solar cells10.1016/j.orgel.2012.09.040 ↗