journal article·2015-02Open access

Development of W–SiO2 and Nb–TiO2 solar absorber coatings for combined heat and power systems at intermediate operation temperatures

Ewa Wäckelgård, Andreas Mattsson, Ruben Bartali, Riccardo Gerosa, Gloria Gottardi, Fredrik Gustavsson, Nadhira Laidani, Victor Micheli, Daniel Primetzhofer, Barbara Rivolta

Abstract

Two new absorber coatings for mid-temperature operation (300–350 °C) in collectors for solar thermal electricity plants are presented in this study. The absorbers consist of two cermet layers of either W–SiO2 or Nb–TiO2, deposited on a molybdenum infrared reflector and coated with an antireflection layer of silicon oxide. The optimization of the optical performance was made in two steps. First, the layer structure was optimized in model calculations. The optical constants used in this modelling were derived directly from sputtered films of the cermet constituents using reflectance and transmittance measurements. The absorber coatings were then sputter-deposited using parameters from the modelling. The results show good agreement between modelled and sputtered optical performance evaluated as solar absorptance and thermal emittance at 350 °C. The optimal values reached for W–SiO2 was 0.91 in combination with 0.08 and 0.93 in combination with 0.09 for Nb–TiO2. The materials characterization from XRD, AES and TEM shows that the composite coatings contain nano-metal inclusions, meaning that they are cermet coatings. Scratch tests show that the coatings adhere well to the substrate of stainless steel. Temperature testing at 350 °C in vacuum for up to 1500 h shows that both coatings are stable under such conditions. Only a slight change occurs during the first 72 h that decreases the emittance but does not change the solar absorptance. ERDA confirms that there is no detectable level of ion migration between layers, only a small decrease in hydrogen content was observed, which indicates outgassing.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Transition Metal Oxide Nanomaterials · Thermal Analysis in Power Transmission

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. L. Crema, R. Bartali, F. Alberti, E. Wackelgard, B. Rivolta, S. Hesse, L. Luminari, D. Hislop, B. Restall, Novel m-CHP generation from small scale concentrated solar power, SHC2013, in: Proceedings of the International Conference on Solar Heating and Cooling for Buildings and Industry, September 23–25 in Freiburg. Energy Procedia, Special Issues, 2014, in preparation.
2. M. Lanxner, Z. Elgat, Solar selective absorber coatings for high service temperatures, produced by plasma sputtering, in: Proceedings of the Society of Photo-Optical Instrumentation Engineers, vol. 1272, 1990, pp. 240–249.
3. Hildebrandt · 2009
4. Meinel · 1976
5. Stability of W–Al2O3 cermet based solar coating for receiver tube operating at high temperature10.1016/j.solmat.2010.04.080 ↗
6. Optical design and co-sputtering preparation of high performance Mo–SiO2 cermet solar selective absorbing coating10.1016/j.apsusc.2013.04.142 ↗
7. Design of wide-angle solar-selective absorbers using aperiodic metal-dielectric stacks10.1364/OE.17.022800 ↗
8. Spectral selective surfaces for concentrated solar power receivers by laser sintering of tungsten micro and nano particles10.1016/j.solmat.2013.07.013 ↗
9. Kennedy · 2002
10. Design of global optimization of high-efficiency solar thermal systems with tungsten cermets10.1364/OE.19.00A245 ↗
11. The spectral properties and thermal stability of NbTiON solar selective absorbing coating10.1016/j.solmat.2011.09.034 ↗
12. W. Theiss, Hard and Software for Optical Spectroscopy (www.mtheiss.com), Aachen, Germany, 2002.
13. Long term calibration monitoring of Spectralon diffusers BRDF in the air-ultraviolet10.1364/AO.46.007892 ↗
14. Detection efficiency of time-of-flight energy elastic recoil detection analysis systems10.1016/S0168-583X(98)00963-X ↗
15. Quantitative mass and energy dispersive elastic recoil spectrometry: resolution and efficiency considerations10.1016/0168-583X(87)90527-1 ↗
16. ERDA of Ni–Al2O3/SiO2 solar thermal selective absorbers10.1016/j.solmat.2008.02.014 ↗
17. M.S. Janson, CONTES (CONversion of Time-Energy Spectra) a program for ERDA data analysis, Internal report, Uppsala University, 2004
18. Palik · 1985
19. Optical properties of Nb from 0.1 to 36.4eV10.1103/PhysRevB.7.4311 ↗
20. Davis · 1978
21. An AES, UPS and HREELS study of the oxidation and reaction of Nb(110)10.1016/S0039-6028(96)01253-8 ↗
22. The preparation of and water adsorption on thin films of niobium oxide on Pt(111)10.1016/0039-6028(94)00508-7 ↗
23. International Centre for Diffraction Data, ICDD, database. Nb reference: PDF (Powder Diffraction Data) 00-035-0789 and 01-088-2330; W reference: PDF (Powder Diffraction Data) 00-004-0806 and 00-047-1319 (β-W), 2012.