Characteristics of zirconium-doped indium tin oxide thin films deposited by magnetron sputtering
Source abstract
Abstract
Abstract ITO:Zr thin films were deposited on glass substrates by co-sputtering with an ITO target and a zirconium target. The experiment parameters such as substrate temperature and oxygen flow rate have an important influence on the properties of ITO:Zr thin films. XRD spectra and AFM reveal the crystalline structure and surface roughness of ITO:Zr thin films. Better optical–electrical characteristics of the films can be achieved at low substrate temperatures, and the increasing substrate temperature remarkably improves the optical–electrical characteristics of the films. Certain oxygen flow rates can enhance the properties of ITO:Zr thin films, but excessive oxygen can worsen the optical–electrical characteristics. The obvious Burstin–Moss effect can be revealed by the transmittance spectra with different parameters, and the direct transition models show the change of optical band gap. As the optimum parameters are selected, ITO:Zr thin films with sheet resistance of 10–20 Ω/sq and optical transmittance of beyond 85% (including glass substrates) can be obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor Technologies Research · ZnO doping and properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Doubled layered ITO/SnO2 conducting glass for substrate of dye-sensitized solar cells10.1016/j.solmat.2005.12.005 ↗
2. High temperature annealing of sprayed SnO2:F layers in a silicon solar cell process with screen-printed contacts10.1016/j.solmat.2005.11.002 ↗
3. Industrially-styled room-temperature pulsed laser deposition of ZnO:Al films10.1016/j.tsf.2005.08.157 ↗
4. Effect of surface treatment and functionalization on the ITO properties for OLEDs10.1016/j.msec.2005.10.078 ↗
5. Surface modifications of ITO electrodes for polymer light-emitting devices10.1016/j.apsusc.2006.04.009 ↗
6. Stability of sputtered ITO thin films to the damp-heat test10.1016/j.surfcoat.2005.11.114 ↗
7. Surface wetting properties of treated indium tin oxide anodes for polymer light-emitting diodes10.1016/S0379-6779(99)00329-X ↗
8. High-mobility transparent conducting Mo-doped In2O3 thin films by pulsed laser deposition10.1063/1.1646468 ↗
9. A new transparent conductive thin film In2O3:Mo10.1016/S0040-6090(01)01142-7 ↗
10. Titanium-doped indium oxide: a high-mobility transparent conductor10.1063/1.1995957 ↗
11. Effect of aluminum doping on the high-temperature stability and piezoresistive response of indium tin oxide strain sensors10.1016/j.tsf.2004.10.045 ↗
12. Transparent conducting zinc-co-doped ITO films prepared by magnetron sputtering10.1016/S0040-6090(00)01132-9 ↗
13. ITO films sputter-deposited using an ITO target sintered with vanadium oxide additive10.1016/S0921-5107(98)00124-X ↗
14. Preparation and characterization of Ni-indium tin oxide cosputtered thin films for organic light-emitting diode application10.1016/j.tsf.2004.08.005 ↗
15. Properties of ITO thin films deposited by RF magnetron sputtering at elevated substrate temperature10.1016/S0921-5107(00)00477-3 ↗
16. Effects of oxygen partial pressure on the properties of reactively evaporated thin films of indium oxide10.1016/0040-6090(88)90291-X ↗
17. Crystallisation of indium-tin-oxide (ITO) thin films10.1016/j.renene.2003.11.020 ↗
18. The behaviors of the carrier concentrations and mobilities in indium-tin-oxide thin films by DC and RF-superimposed DC reactive magnetron sputtering at the various process temperatures10.1016/j.apsusc.2005.02.128 ↗
19. The effect of annealing on structural, electrical and optical properties of nanostructured ITO films prepared by e-beam evaporation10.1016/j.materresbull.2006.06.024 ↗
20. Effects of tin on IR reflectivity, thermal emissivity, hall mobility and plasma wavelength of sol–gel indium tin oxide films on glass10.1016/S0167-577X(02)01220-X ↗
21. Theoretical model for the optical properties of In2O3:Sn films in the 0.3–50μm range10.1016/0165-1633(86)90051-1 ↗
22. Influence of oxygen in the deposition and annealing atmosphere on the characteristics of ITO thin films prepared by sputtering at room temperature10.1016/j.vacuum.2005.10.006 ↗
23. Influence of pressure and annealing on the microstructural and electro-optical properties of RF magnetron sputtered ITO thin films10.1016/j.materresbull.2004.03.008 ↗
24. Electron scattering mechanisms in indium-tin-oxide thin films: grain boundary and ionized impurity scattering10.1016/j.vacuum.2004.03.008 ↗