Effects of antireflection layers on the optical and thermal stability properties of a spectrally selective CrAlN–CrAlON based tandem absorber
Source abstract
Abstract
Abstract Spectrally selective CrAlN–CrAlON based tandem absorber was deposited by magnetron sputtering and the effects of antireflection layers on the optical and thermal stability properties of tandem absorber were investigated. The thickness of the individual component layers was optimized by matrix method to achieve high solar absorptance and low thermal emittance. TEM, XRD and XPS results confirmed the microstructure of the nanocomposite CrAlN and CrAlON coatings was consisted of nanocrystalline CrN embedded in amorphous matrix of AlN or Al 2 O 3 . The optimized CrAlN/CrAlON/Al 2 O 3 tandem absorber exhibited a high absorptance of 0.984 and a low emittance of 0.07 at 82 °C. The high absorptance value of this CrAlN–CrAlON based tandem can be partially attributed to the nanocomposite structure of the CrAlN and CrAlON coatings. Accelerated aging tests indicated that the CrAlN/CrAlON/Al 2 O 3 tandem absorbers had high thermal stability in air up to 550 °C for 100 h with high solar selectivity of 11.5. However, for CrAlN/CrAlON/Si 3 N 4 tandem absorber, the emittance coefficient increased drastically above 500 °C which can be attributed to the increased surface roughness and oxidation of Si 3 N 4 antireflection layer. The CrAlN/CrAlON/Al 2 O 3 tandem absorber with high thermal stability has great potential for application in high temperature solar selective field.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Review of physical vapor deposited (PVD) spectrally selective coatings for mid-to-high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
2. Fabrication and optimization of highly efficient cermet-based spectrally selective coatings for high operating temperature10.1016/j.tsf.2009.03.191 ↗
3. Stability of W–Al2O3 cermet based solar coating for receiver tube operating at high temperature10.1016/j.solmat.2010.04.080 ↗
4. Optical characterization of TiAlN/TiAlON/SiO2 absorber for solar selective applications10.1016/j.surfcoat.2011.09.003 ↗
5. Sputter-deposited Al2O3/Mo/Al2O3, selective absorber coatings10.1016/0040-6090(80)90563-5 ↗
6. Structure, optical properties and thermal stability of pulsed sputter deposited high temperature HfOx/Mo/HfO2 solar selective absorbers10.1016/j.solmat.2010.04.073 ↗
7. Thermally and air-plasma-oxidized titanium and stainless steel plates as solar selective absorbers10.1016/j.solmat.2006.03.032 ↗
8. Solar selective absorbers based on two-dimensional W surface gratings with submicron periods for high-temperature photothermal conversion10.1016/S0927-0248(02)00364-1 ↗
9. High solar performance selective surface using bi-sublayer cermet film structures10.1016/0927-0248(92)90089-8 ↗
10. Recent progress in high-temperature solar selective coatings10.1016/S0927-0248(99)00136-1 ↗
11. Optimization of an industrial DC magnetron sputtering process for graded composition solar thermal absorbing layer10.1016/j.solmat.2005.03.018 ↗
12. The optical properties of sputtered composite of Al–AlN10.1016/j.solmat.2005.11.006 ↗
13. The degradation of solar thermal absorption coatings10.1016/j.egypro.2014.03.185 ↗
14. Microstructure, optical and electrical properties of CrAlN film as a novel material for high temperature solar selective absorber applications10.1016/j.matlet.2014.06.159 ↗
15. A study of the oxidation behavior of CrN and CrAlN thin films in air using DSC and TGA analyses10.1016/j.surfcoat.2007.11.037 ↗
16. High temperature properties of CrAlN, CrAlSiN and AlCrSiN coatings-structure and oxidation10.1016/j.matchemphys.2011.03.078 ↗
17. Corrosion resistance of CrAlN and TiAlN coatings deposited by lateral rotating cathode arc10.1016/j.tsf.2007.07.069 ↗
18. The spectral properties and thermal stability of CrAlO-based solar selective absorbing nanocomposite coating10.1016/j.solmat.2013.12.010 ↗
19. Spectrally selective CrMoN/CrON tandem absorber for mid-temperature solar thermal applications10.1016/j.solmat.2012.10.003 ↗
20. Magnetron sputtering of hard Cr–Al–N–O thin films10.1016/j.surfcoat.2008.04.083 ↗
21. Oxidation behavior of Cr–Al–N–O thin films prepared by pulsed laser deposition10.1016/S0040-6090(02)00024-X ↗
22. Structural and mechanical properties of Cr–Al–O–N thin films grown by cathodic arc deposition10.1016/j.actamat.2012.08.010 ↗
23. The influence of oxygen in TiAlOxNy on the optical properties of colored solar-absorbing coatings10.1016/j.solmat.2011.11.001 ↗
24. Spectroscopic ellipsometric characterization of TiAlN/TiAlON/Si3N4 tandem absorber for solar selective applications10.1016/j.apsusc.2007.07.109 ↗
25. Design and fabrication of highly thermally stable HfMoN/HfON/Al2O3 tandem absorber for solar thermal power generation applications10.1016/j.solmat.2012.03.021 ↗
26. Spectrally selective NbAlN/NbAlON/Si3N4 tandem absorber for high-temperature solar applications10.1016/j.solmat.2007.11.004 ↗
27. Deposition and characterization of TiAlN/TiAlON/Si3N4 tandem absorbers prepared using reactive direct current magnetron sputtering10.1016/j.tsf.2007.10.113 ↗
28. Shi · 2009 · 10
29. Al2O3 antireflection layer between glass and transparent conducting oxide for enhanced light trapping in microcrystalline silicon thin film solar cells10.1016/j.solmat.2012.02.020 ↗
30. Medium frequency magnetron self-sputtering of copper10.1016/j.vacuum.2008.01.027 ↗
31. Nanolayered multilayer coatings of CrN/CrAlN prepared by reactive DC magnetron sputtering10.1016/j.apsusc.2006.11.021 ↗
32. Influence of CrN and AlN layer thicknesses on structure and mechanical properties of CrN/AlN superlattices10.1016/j.tsf.2013.07.026 ↗
33. Periodic microstructures of Cr–O–N coatings deposited by arc ion plating10.1016/j.surfcoat.2014.06.051 ↗
34. Designing superhard, self-toughening CrAlN coatings through grain boundary engineering10.1016/j.actamat.2012.06.049 ↗
35. XPS characterization of thin (Al2O3)x(TiO2)1−x films deposited on silicon
36. XPS investigation of Si3N4/SiC nanocomposite prepared using a commercial polymer10.1111/j.1151-2916.1999.tb01879.x ↗
37. A comparative study of reactive direct current magnetron sputtered CrAlN and CrN coatings10.1016/j.surfcoat.2006.03.037 ↗
38. Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by reactive DC/RF magnetron sputtering10.1016/j.solmat.2008.06.004 ↗
39. Thermal stability of Al–O–N PVD diffusion barriers10.1016/S0257-8972(98)00614-8 ↗
40. Influence of deposition parameters on hard Cr–Al–N coatings deposited by multi-arc ion plating10.1016/j.apsusc.2011.11.127 ↗
41. Fabrication of CrAlN nanocomposite films with high hardness and excellent anti-wear performance for gear application10.1016/j.surfcoat.2010.04.014 ↗
42. Preparation of Cr(N,O) thin films by RF reactive unbalanced magnetron sputtering10.1016/j.tsf.2011.01.106 ↗
43. Revealing the innermost nanostructure of sputtered NiCrOx solar absorber cermets10.1016/j.solmat.2013.10.009 ↗
44. Terahertz radiation from coherent antiferromagnetic magnons excited by femtosecond laser pulses10.1063/1.3436635 ↗
45. R. Perrem, F. Henry, G Peraudeau, B. Armas, R. Berjoan, E. Beche, An XPS and thermogravimetric study of oxidized AlN and AlN–Si3N4 layers deposited by liquid-phase chemical vapour deposition. J. Mater. Sci., 32 (97) 1305-1312.10.1023/A:1018556606993 ↗
46. Growth and characterization of TiAlN/CrAlN superlattices prepared by reactive direct current magnetron sputtering10.1116/1.3013858 ↗