journal article·2013-10

Optical modeling of multilayered coatings based on SiC(N)H materials for their potential use as high-temperature solar selective absorbers

Audrey Soum-Glaude, Isabelle Bousquet, Laurent Thomas, Gilles Flamant

Publisher page

Abstract

Abstract SiCH thin films grown from Ar/tetramethylsilane plasmas (PECVD) were evaluated as absorber layers in selective coatings for high-temperature solar receivers. SiCH coatings are used in thermomechanical applications because of their good thermal stability. A SiCH film with an absorption index k (430 nm)=0.11 was taken as a reference for optical simulations of refractory metal–SiCH multilayer stacks and cermets. The transfer matrix method and Maxwell–Garnett effective medium approximation were used to calculate the spectral reflectance and transmittance of the selective absorbers. Their solar absorptance and thermal emittance were also deduced. A seven-layer stack with alternating metal and SiCH layers was found to present a simulated solar absorptance of 0.92 and thermal emittance of 0.08 at 500 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. M. Du, L. Hao, X. Liu, J. Mi, L. Jiang, S. Wang, Characterization of Ti0.5Al0.5N/Ti0.25Al0.75N/AlN Coating Used for Solar Selective Applications, SolarPACES 2011, Granada, Spain, 20–23 Sept 201110.1016/j.solmat.2011.01.006 ↗
2. Direct current magnetron sputtered W–AlN cermet solar absorber films10.1116/1.580837 ↗
3. Structure and optical properties of Ag–Al2O3 nanocermet solar selective coatings prepared using unbalanced magnetron sputtering10.1016/j.solmat.2011.01.034 ↗
4. Deposition and characterization of TiAlN/TiAlON/Si3N4 tandem absorbers prepared using reactive direct current magnetron sputtering10.1016/j.tsf.2007.10.113 ↗
5. Optical characterization of TiAlN/TiAlON/SiO2 absorber for solar selective applications10.1016/j.surfcoat.2011.09.003 ↗
6. The spectral properties and thermal stability of NbTiON solar selective absorbing coating10.1016/j.solmat.2011.09.034 ↗
7. C.E. Kennedy, High Temperature Solar Selective Coatings, US Patent 2010/0313875 A1, Dec 2010.
8. High efficiency Mo–Al2O3 cermet selective surfaces for high-temperature application10.1016/0927-0248(95)00078-X ↗
9. Microstructure and spectral selectivity of Mo–Al2O3 solar selective absorbing coatings after annealing10.1016/j.tsf.2007.07.193 ↗
10. Pt–Al2O3 selective absorber coatings for photothermal conversion up to 600°C10.1016/0042-207X(86)90285-X ↗
11. Fabrication and optimisation of highly efficient cermet-based spectrally selective coatings for high operating temperature10.1016/j.tsf.2009.03.191 ↗
12. Stability of W–Al2O3 cermet based solar coating for receiver tube operating at high temperature10.1016/j.solmat.2010.04.080 ↗
13. M. Lanxner, Z. Elgat, Solar selective absorber coating for high service temperatures produced by plasma sputtering, in: Optical Materials Technology for Energy Efficiency and Solar Energy Conversion IX, 12 March 1990, The Hague, Netherlands, Proceedings SPIE 1272 1990, pp. 240.10.1117/12.20448 ↗
14. F. Burkholder, C. Kutscher, Heat Loss Testing of Schott's 2008 PTR70 Parabolic Trough Receiver, NREL Technical Report NREL/TP-550-45633, May 2009.10.2172/1369635 ↗
15. Siemens UVAC 2010 Brochure 〈www.energy.siemens.com〉.
16. Archimede Solar Energy (ASE) website 〈http://www.archimedesolarenergy.it〉.
17. SunShot Vision Study, Chapter 5: Concentrating Solar Power, Feb 2012. 〈http://www1.eere.energy.gov/solar/sunshot/index.html〉
18. ADEME Solar Roadmap, ISBN 978-2-35838-195-6, Feb 2011.
19. Kennedy · 2002
20. Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by reactive DC/RF magnetron sputtering10.1016/j.solmat.2008.06.004 ↗
21. Sputtering deposition and characterization of tandem absorbers for photo-thermal systems operating at mid temperature10.1016/j.optmat.2011.08.030 ↗
22. Spectrally selective NbAlN/NbAlON/Si3N4 tandem absorber for high-temperature solar applications10.1016/j.solmat.2007.11.004 ↗
23. Structure, optical properties and thermal stability of pulsed sputter deposited high temperature HfOx/Mo/HfO2 solar selective absorbers10.1016/j.solmat.2010.04.073 ↗
24. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
25. High-temperature space-stable selective solar absorber coatings10.1364/AO.4.000917 ↗
26. R.J. Farrauto, J.C. Williams, H. Myers, Thin Film Solar Energy Collector, U.S. Patent 4,321,300, 23 March 1982.
27. Thermal stability of diamond-like carbon films with added silicon10.1016/S0257-8972(98)00719-1 ↗
28. Amorphous hydrogenated carbon films for tribological applications, I. Development of moisture insensitive films having reduced compressive stress10.1016/0301-679X(96)00017-5 ↗
29. Improved high-temperature stability of Si incorporated a-C:H films10.1016/S0925-9635(98)00165-4 ↗
30. Deposition of Si-DLC films with high hardness, low stress and high deposition rates10.1016/S0257-8972(00)00932-4 ↗
31. Amorphous silicon carbide coatings grown by low frequency PACVD: Structural and mechanical description10.1016/j.surfcoat.2005.11.066 ↗
32. Investigation of the tribological behavior and its relationship to the microstructure and mechanical properties of a-SiC:H films elaborated by low frequency plasma assisted chemical vapor deposition10.1016/j.tsf.2010.09.024 ↗
33. A comparative study of copper drift diffusion in plasma deposited a-SiC:H and silicon nitride10.1016/S0167-9317(00)00464-0 ↗
34. Etching characteristics and mechanical properties of a-SiC:H thin films10.1016/S0924-4247(01)00691-4 ↗
35. Effect of high-temperature annealing on the optical-absorption edge of hydrogenated amorphous silicon–carbon films10.1103/PhysRevB.46.4590 ↗
36. D.S. Kim, Y.H. Lee, Annealing effects on a-SiC:H and a-SiC:H(F) thin films deposited by PECVD at room temperature, Thin Solid Films 261 (1995) 192-201.10.1016/S0040-6090(94)06473-3 ↗
37. Characterization and application of a-SiCx:H films for the passivation of the c-Si surface10.1016/S0040-6090(01)01648-0 ↗
38. Composition and thermal-annealing-induced short-range ordering changes in amorphous hydrogenated silicon carbide films as investigated by extended x-ray-absorption fine structure and infrared absorptions10.1103/PhysRevB.51.4903 ↗
39. Annealing effect on the optical properties of a-SiC:H films deposited by PECVD10.2320/matertrans.43.2058 ↗
40. Y. Suzaki, T. Shikama, S. Yoshioka, K. Yoshii, K. Yasutake, Concentration and thermal release of hydrogen in amorphous silicon carbide films prepared by rf sputtering Thin Solid Films 311 (1997) 207-211.10.1016/S0040-6090(97)00371-4 ↗
41. Accelerated aging tests of chromium containing amorphous hydrogenated carbon coatings for solar collectors10.1016/S0927-0248(98)00088-9 ↗
42. Application of titanium containing amorphous hydrogenated carbon films (a-C:H/Ti) as optical selective solar absorber coatings10.1016/S0927-0248(99)00074-4 ↗
43. Titanium-containing amorphous hydrogenated silicon carbon films (a-Si:C:H/Ti) for durable solar absorber coatings10.1016/S0927-0248(00)00396-2 ↗
44. G. Covarel, M. Joinet, L.Thomas, V. Lucas, Hard amorphous silicon carbide PACVD films on titanium alloy for mechanical applications, in: 14th International Colloquium on Plasma Processes (CIP 2003), Antibes, France, June 30–July 3, 2003.
45. Optical properties of a Maxwell–Garnett composite medium with nonspherical silver inclusions10.1007/s11182-010-9349-6 ↗
46. The challenge of ceramic/metal microcomposites and nanocomposites10.1016/j.pmatsci.2006.09.003 ↗
47. Computer simulation of the optical properties of high-temperature cermet solar selective coatings10.1016/j.solener.2004.09.024 ↗
48. Optical dispersion relations for amorphous semiconductors and amorphous dielectrics10.1103/PhysRevB.34.7018 ↗
49. Optical-properties of crystalline semiconductors and dielectrics10.1103/PhysRevB.38.1865 ↗
50. Parameterization of the optical functions of amorphous materials in the interband region10.1063/1.118064 ↗
51. An algorithm for least-squares estimation of nonlinear parameters10.1137/0111030 ↗
52. 1985
53. B.L. Henke, E. M. Gullikson, J. C. Davis, X-ray Interactions: Photoabsorption, Scattering, Transmission and Reflection at E-50-30000eV, Z=1-92, Atomic Data and Nuclear Tables 54 (1993). See also http://www-cxro.lbl.gov (Center for X-Ray Optics (CXRO)).
54. Colours in metal glasses and in metallic films10.1098/rsta.1904.0024 ↗
55. 2005
56. Nickel pigmented anodic aluminum oxide for selective absorption of solar energy10.1063/1.327337 ↗
57. Sh.A. Furman, A.V. Tikhonrarov, Spectral characteristics of multilayer coatings: theory, in: Frontières, Gif-sur-Yvette (Ed.), Basics of Optics of Multilayer Systems, 1992.
58. Luxpop, Index of Refraction and Photonics Calculations, 〈www.luxpop.com〉.
59. Standard Tables for Reference Solar Spectral Irradiance at Air Mass 1.5: Direct Normal and Hemispherical for a 37 Tilted Surface, ASTM G173-03 Reference Spectra derived from SMARTS v. 2.9.2 (AM1.5), Renewable Resource Data Center rredc.nrel.gov/solar/spectra.
60. Meyer-Arendt · 1989
61. Convergence properties of the Nelder–Mead simplex method in low dimensions10.1137/S1052623496303470 ↗
62. Determination of (n, k) for absorbing thin films using reflectance measurements10.1364/AO.27.004260 ↗
63. M. Arntzen, S. Dreyer, J. Specht, T. Kuckelkorn, M. Schmidt, A. Sauerborn, Accelerated Ageing Tests on SCHOTT PTR 70 HCE, SolarPACES 2011, Granada, Spain, 20–23 Sept 2011.
64. A numerical thermal approach to study the accelerated aging of a solar absorber material10.1016/j.solener.2012.08.007 ↗
65. Advanced optical effective medium modeling for a single layer of polydisperse ellipsoidal nanoparticles embedded in a homogeneous dielectric medium: surface plasmon resonances10.1103/PhysRevB.86.045415 ↗