journal article·2021-08Open access

Emissivity at high temperature of Ni-based superalloys for the design of solar receivers for future tower power plants

Marianne Balat-Pichelin, Jean-Louis Sans, Eric Bêche, Ludovic Charpentier, Alain Ferrière, Sébastien Chomette

Abstract

In the framework of the H2020 European project POLYPHEM, whose main objective is to improve the flexibility and performance of small-scale solar power plants, studies have been conducted on various nickel-based alloys for the design of the solar receiver. Inconel 600 alloy is used as a reference material in the advanced manufacturing of high temperature solar receivers but other oxidation resistant alloys have been selected such as Inconel 617, Haynes 230, Haynes HR120 and Hastelloy X and the best candidate will be used for making the prototype. Thus, two essential quantities, namely the solar absorptivity α – the higher the better – and the total hemispherical emissivity ε – the lower the better – were measured in high vacuum and under atmospheric air up to 1400 K in the MEDIASE reactor installed at the focus of the 1000 kW solar furnace. The objective is to reach the best solar absorptivity and the α/ε ratio the highest as possible. The emissivity measurement was made by a direct method requiring the measurement of the true temperature of the material using a bi-chromatic pyro-reflectometer and that of its radiance by spectro-radiometry. Total hemispherical emissivity data are presented at the same time as microstructural (SEM, XRD) and topographic (3D profilometry) characterizations allowing the interpretation of the emissivity evolution with temperature and the growth of the oxide layer. Finally, the alloy Haynes 230 was chosen to build the solar receiver.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Radiative Heat Transfer Studies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Experimental Characterization of a High Temperature Pressurized Air Solar Absorber for the PEGASE Project
2. Impact of corrosion on the emissivity od advanced reactor structural alloys10.1016/j.jnucmat.2018.05.047 ↗
3. Total hemispherical emissivity of potential structural materials for very high temperature reactor systems: Hastelloy X10.13182/NT10-6 ↗
4. Hemispherical total emissivity of potential structural materials for very high temperature reactor systems: Haynes 23010.13182/NT11-5 ↗
5. Photoelectrochemical study of nickel base alloys oxide films formed at high temperature and high pressure water10.1016/j.electacta.2010.04.063 ↗
6. Oxidation characteristics and oxide layer evolution of alloy 617 and Haynes 230 at 900°C and 1100°C10.1007/s11085-009-9142-5 ↗
7. Normal spectral emissivity of GH536 (Hastelloy X) in three surface conditions10.1016/j.applthermaleng.2016.11.022 ↗
8. Oxide growth characterization during short-time oxidation of a commercially available chromia-forming alloy (HR-120) in air at 1050°C10.1007/s11085-013-9367-1 ↗
9. The development and testing of emissivity enhancement coatings for thermophotovoltaic (TPV) radiator applications10.1016/S0040-6090(99)00438-1 ↗
10. Emissivity measurements on carbon-carbon composites at high temperature under high vacuum10.1016/j.apsusc.2006.01.007 ↗
11. Influence of roughness and composition on the total emissivity of tungsten, rhenium and tungsten-25% rhenium alloy at high temperature10.1016/j.jallcom.2013.09.184 ↗
12. Efficiency and behavior of textured high emissivity metallic coatings at high temperature10.1016/j.matdes.2015.05.073 ↗
13. Experimental validation of a pyroreflectometric method to determine the true temperature on opaque surface without hampering reflections10.1016/j.measurement.2009.01.012 ↗
14. Oxidation and emissivity of Inconel 718 alloy as potential space debris during its atmospheric entry10.1016/j.matchar.2017.02.016 ↗
15. Oxidation and emissivity of Invar 36 alloy in air plasma at high temperatures10.1016/j.jallcom.2018.09.100 ↗
16. Spectral emissivity of oxidized and roughened metal surfaces10.1016/j.ijheatmasstransfer.2017.08.103 ↗