journal article·2020-06

Beyond 10% efficient Cu2ZnSn(S,Se)4 solar cells: Effects of the introduction of SnS powder during selenization process

Bin Xu, Chuanhe Ma, Xiaoshuang Lu, Yulin Liu, Qiao Zhang, Ye Chen, Pingxiong Yang, Junhao Chu, Lin Sun

Publisher page

Abstract

Abstract Cu2ZnSn(S,Se)4 (CZTSSe) has received considerable attention as the promising absorber for thin-film solar cells. For traditional selenization process, the issues of Sn-loss, lower S/(S + Se) ratio, and unsuitable back contact interface extensively exist in CZTSSe solar cells. In present work, SnSe and SnS powder is introduced during selenization process, respectively. The effects of SnSe and SnS powder on CZTSSe films and the Mo/CZTSSe interface have been comprehensively studied. We discover that SnS not only can provide the Sn-contained vapor in selenization process but also offer S-vapor. Due to the presence of Sn-contained vapor, the number of voids in the CZTSSe absorber and Mo/CZTSSe interface decreases remarkably and the Sn-loss is effectively suppressed. The thickness of Mo(S,Se)2 layer is significantly reduced, and the S/(S + Se) ratio in CZTSSe bulk obviously increases owing to the presence of S-vapor. As a consequence, the open-circuit voltage and fill factor of the solar cell significantly increase and the CZTSSe solar cell with efficiency of 10.07% (total area) is successfully fabricated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
2. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
3. Photovoltaic materials and devices based on the alloyed kesterite absorber (AgxCu1-x)2ZnSnSe410.1002/aenm.201502468 ↗
4. Beyond 11% efficient Cu2ZnSn(Se,S)4 thin film solar cells by cadmium alloying10.1016/j.solmat.2017.09.043 ↗
5. Improving the open circuit voltage through surface oxygen plasma treatment and 11.7% efficient Cu2ZnSnSe4 solar cell10.1021/acsami.9b01756 ↗
6. Effects of selenization conditions on microstructure evolution in solution processed Cu2ZnSn(S,Se)4 solar cells10.1016/j.solmat.2019.03.024 ↗
7. Origin of band-tail and deep-donor states in Cu2ZnSnS4 solar cells and their suppression through Sn-poor composition10.1021/acs.jpclett.9b03227 ↗
8. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
9. Cu2ZnSnSe4 thin-film solar cells by thermal Co-evaporation with 11.6% efficiency and improved minority carrier diffusion length10.1002/aenm.201401372 ↗
10. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device10.1039/C9TA08310C ↗
11. Cd-free Cu(in,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%10.1109/JPHOTOV.2019.2937218 ↗
12. Defect engineering in multinary earth-abundant chalcogenide photovoltaic materials10.1002/aenm.201602366 ↗
13. The consequences of kesterite equilibria for efficient solar cells10.1021/ja111713g ↗
14. Reactive mechanism of Cu2ZnSnSe4 thin films prepared by reactive annealing of the Cu/Zn metal layer in a SnSex + Se atmosphere10.3390/cryst9010010 ↗
15. 11.2% efficient solution processed kesterite solar cell with a low voltage deficit10.1002/aenm.201500712 ↗
16. Nanoparticle‐based Cu2ZnSn(S,Se)4 solar cells with a 9.1% efficiency obtained by an optimization of sintering process10.1002/solr.201700063 ↗
17. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
18. Mechanism on the modified sulfurization process for growing large-grained Cu2ZnSnS4 thin films10.1016/j.solener.2019.12.063 ↗
19. Control of an interfacial MoSe2 layer in Cu2ZnSnSe4 thin film solar cells: 8.9% power conversion efficiency with a TiN diffusion barrier10.1063/1.4740276 ↗
20. Beyond 8% ultrathin kesterite Cu2ZnSnS4 solar cells by interface reaction route controlling and self-organized nanopattern at the back contact10.1038/am.2017.103 ↗
21. Tailoring Mo(S,Se)2 structure for high efficient Cu2ZnSn(S,Se)4 solar cells10.1016/j.solmat.2017.10.011 ↗
22. The importance of back contact modification in Cu2ZnSnSe4 solar cells: the role of a thin MoO2 layer10.1016/j.nanoen.2016.06.034 ↗
23. Enhancing back interfacial contact by in-situ prepared MoO3 thin layer for Cu2ZnSnSxSe4-x solar cells10.1007/s40843-018-9381-1 ↗
24. Chemical dynamics of back contact with MoO3 interfacial layer in kesterite solar cells: microstructure evolution and photovoltaic performance10.1002/solr.201900131 ↗
25. Cu2ZnSn(S,Se)4 solar cells processed by rapid thermal processing of stacked elemental layer precursors10.1016/j.tsf.2012.10.042 ↗
26. Single-step sulfo-selenization method to synthesize Cu2ZnSn(S(y)Se(1-y))4 absorbers from metallic stack precursors10.1002/cphc.201300157 ↗
27. The role of sulfur in solution-processed Cu2ZnSn(S,Se)4 and its effect on defect properties10.1002/adfm.201201732 ↗
28. Effects of S and Se contents on the physical and photovoltaic properties of Cu2ZnSn(Sx, Se1-x)4 thin films: achieving a PCE of 9.47%10.1039/C9TA08319G ↗
29. Preparation of Cu2ZnSnS4 films by electrodeposition using ionic liquids10.1016/j.solmat.2009.09.003 ↗
30. 10% Efficiency Cu2ZnSn(S,Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗
31. Elemental precursor solution processed (Cu1-xAgx)2ZnSn(S,Se)4 photovoltaic devices with over 10% efficiency10.1021/acsami.7b03944 ↗
32. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
33. Engineering of interface band bending and defects elimination via a ag-graded active layer for efficient (Cu,Ag)2ZnSn(S,Se)4 Solar Cells10.1039/C7EE01405H ↗
34. Beyond 11% efficient sulfide kesterite Cu2ZnxCd1–xSnS4 solar cell: effects of cadmium alloying10.1021/acsenergylett.7b00129 ↗
35. Bulk and metastable defects in CuIn1-xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
36. Electronic properties of the Cu2ZnSn(Se,S)4 absorber layer in solar cells as revealed by admittance spectroscopy and related methods10.1063/1.4729751 ↗
37. Optimization of DMSO-based precursor solution by H2O additive for performance enhancement of kesterite photovoltaic devices10.1016/j.solmat.2018.02.001 ↗
38. Cation substitution of solution-processed Cu2ZnSnS4 thin film solar cell with over 9% efficiency10.1002/aenm.201500682 ↗