journal article·2019-09

SnO2/Mg combination electron selective transport layer for Si heterojunction solar cells

Ming Liu, Yurong Zhou, Gangqiang Dong, Wenjing Wang, Jiaou Wang, Chen Liu, Fengzhen Liu, Donghong Yu

Publisher page

Abstract

In this paper, SnO2 prepared by sol-gel method was spin-coated on textured n-type crystalline silicon (c-Si) wafers to replace phosphorus doped n-type hydrogenated amorphous silicon (a-Si:H) in novel Si heterojunction (SHJ) solar cells. Good coverage of the sol-gel SnO2 layer on pyramidal textured silicon substrate was achieved. It was demonstrated that a low-work-function metal electrode is necessary for the dopant-free electron transport layer. The SnO2/Mg combination layer was determined to have a low-work-function feature and exhibit a synergistic effect in promoting the selective transport of carriers. A combination passivation layer containing intrinsic amorphous silicon (a-Si:H(i)) and SiOx which was formed from UV-O3 photo oxidation of the a-Si:H(i) surface for a short time was used to passivate the interface between the SnO2 and the c-Si. The new type a-Si:H/SiOx/SnO2/Mg contact is effective to achieve not only a low contact resistivity but also good passivation properties. Finally, a power conversion efficiency (PCE) of 18.6% and an open circuit voltage of 695 mV was achieved on a novel SHJ solar cell with an a-Si:H(i)/SiOx combination passivation layer and a SnO2/Mg combination electron selective transport layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Yamamoto · 2017 · 201
2. High-efficiency crystalline silicon solar cells: status and perspectives10.1039/C5EE03380B ↗
3. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
4. Silicon heterojunction solar cell with passivated hole selective MoOx contact10.1063/1.4868880 ↗
5. Molybdenum and tungsten oxide: high work function wide band gap contact materials for hole selective contacts of silicon solar cells10.1016/j.solmat.2015.05.031 ↗
6. Silicon solar cells with bifacial metal oxides carrier selective layers10.1016/j.nanoen.2017.07.014 ↗
7. Efficient silicon solar cells with dopant-free asymmetric heterocontacts10.1038/nenergy.2015.31 ↗
8. Silicon heterojunction solar cells with electron selective TiOx contact10.1016/j.solmat.2016.01.020 ↗
9. High‐performance TiO2‐based electron‐selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
10. Conductive and stable magnesium oxide electron‐selective contacts for efficient silicon solar cells10.1002/aenm.201601863 ↗
11. Performance and thermal stability of an a-Si: H/TiOx/Yb stack as an electron-selective contact in silicon heterojunction solar cells10.1021/acsaem.8b01969 ↗
12. Passivating electron‐selective contacts for silicon solar cells based on an a‐Si: H/TiOx stack and a low work function metal10.1002/pip.3023 ↗
13. Tantalum oxide electron-selective heterocontacts for silicon photovoltaics and photoelectrochemical water reduction10.1021/acsenergylett.7b01153 ↗
14. Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells10.1038/nenergy.2016.177 ↗
15. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
16. Solution‐processed ZnO as the efficient passivation and electron selective layer of silicon solar cells10.1002/pip.3044 ↗
17. Low-temperature solution-processed SnO2 nanoparticles as a cathode buffer layer for inverted organic solar cells10.1021/acsami.6b10857 ↗
18. Porous polyelectrolytes: the interplay of charge and pores for new functionalities10.1002/anie.201710272 ↗
19. Explorative studies of novel silicon surface passivation materials: considerations and lessons learned10.1016/j.solmat.2018.07.003 ↗
20. n-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
21. Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics10.1016/j.solmat.2013.09.017 ↗
22. Origin of electric dipoles formed at high-k/SiO2 interface10.1063/1.3110968 ↗
23. A magnesium/amorphous silicon passivating contact for n-type crystalline silicon solar cells10.1063/1.4962960 ↗
24. Ohmic contacts for GaAs devices10.1016/0038-1101(67)90063-9 ↗
25. Magnesium fluoride electron-selective contacts for crystalline silicon solar cells10.1021/acsami.6b03599 ↗
26. Atomic-layer deposited Nb2O5 as transparent passivating electron contact for c-Si solar cells10.1016/j.solmat.2018.04.037 ↗
27. A low resistance calcium/reduced titania passivated contact for high efficiency crystalline silicon solar cells10.1002/aenm.201602606 ↗
28. Surface studies by scanning tunneling microscopy10.1103/PhysRevLett.49.57 ↗
29. The work function of the elements and its periodicity10.1063/1.323539 ↗
30. Retarding charge recombination in perovskite solar cells using ultrathin MgO-coated TiO2 nanoparticulate films10.1039/C4TA03684K ↗
31. Revealing and reducing the possible recombination loss within TiO2 compact layer by incorporating MgO layer in perovskite solar cells10.1016/j.solener.2016.07.019 ↗
32. Improved amorphous/crystalline silicon interface passivation for heterojunction solar cells by low-temperature chemical vapor deposition and post-annealing treatment10.1039/C4CP02212B ↗
33. MF-sputtered AZO for a-Si SHJ solar cells10.1016/j.egypro.2014.08.059 ↗
34. Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition10.1039/C4EE01546K ↗