Pulsed laser/ electrodeposited CuBi2O4/BiVO4 p-n heterojunction for solar water splitting
Source abstract
Abstract
Abstract CuBi2O4 is regarded as p-type candidate for photoelectrochemical water splitting due to its attractive thermodynamic and band structure features. In this work, we present the optimization of CuBi2O4 thin films synthesized by electrodeposition method on FTO glass substrate. CuBi2O4/BiVO4 heterojunction were further fabricated by depositing BiVO4 on CuBi2O4 with pulsed laser deposition method. The influence of parameters such as the electrodeposition time and pulse count of PLD deposition on performance of the heterojunctions was studied. The films were characterized by X-ray diffraction, SEM, UV–Vis and electrochemical properties. The optimal deposition condition for CuBi2O4 sample was found to be electrodeposition for 20 min and annealing at 500 °C for 4 h. Pulse laser deposition (PLD) was used for the first time to deposit BiVO4 on CuBi2O4 to form p-n heterojunction. The photoelectrochemical behavior study of sample with different BiVO4 thin film thickness showed that the optimal photocurrent is − 0.25 mA/cm2 in 0.1 M Na2SO4 (pH = 6), which is doubled comparing to that of the bare CuBi2O4 film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Photocatalysis Techniques · Copper-based nanomaterials and applications · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. A place in the sun for artificial photosynthesis?10.1021/acsenergylett.6b00059 ↗
2. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
3. Solar water splitting cells10.1021/cr1002326 ↗
4. High aspect ratio TiO2 nanowires tailored in concentrated HCl hydrothermal condition for photoelectrochemical water splitting10.1039/C5RA06149K ↗
5. Efficient photoelectrochemical water splitting with ultrathin films of hematite on three-dimensional nanophotonic structures10.1021/nl500359e ↗
6. Nanostructured WO3/BiVO4 heterojunction films for efficient photoelectrochemical water splitting10.1021/nl2000743 ↗
7. A highly efficient nanoporous BiVO4 photoelectrode with enhanced interface charge transfer Co-catalyzed by molecular catalyst10.1016/j.apcatb.2017.12.014 ↗
8. Highly active oxide photocathode for photoelectrochemical water reduction10.1038/nmat3017 ↗
9. Optimization and stabilization of electrodeposited Cu2ZnSnS4 photocathodes for solar water reduction10.1021/am402096r ↗
10. Spray pyrolysis of CuBi2O4 photocathodes: improved solution chemistry for highly homogeneous thin films10.1039/C7TA03009F ↗
11. efficient complete oxidation of acetaldehyde into CO2 over CuBi2O4/WO3 composite photocatalyst under visible and UV light irradiation10.1021/jp0725533 ↗
12. Photoelectrochemical properties and photostabilities of high surface area CuBi2O4 and Ag-doped CuBi2O4 photocathodes10.1021/acs.chemmater.6b01294 ↗
13. Fabrication of CuBi2O4 photocathode through novel anodic electrodeposition for solar hydrogen production10.1016/j.electacta.2014.01.088 ↗
14. Spray pyrolysis of CuBi2O4 photocathodes: improved solution chemistry for highly homogeneous thin films10.1039/C7TA03009F ↗
15. p-type CuBi2O4 thin films prepared by flux-mediated one-pot solution process with improved structural and photoelectrochemical characteristics10.1016/j.matlet.2016.10.124 ↗
16. Fabrication and characterization of low cost Cu2O/ZnO:Al solar cells for sustainable photovoltaics with earth abundant materials10.1016/j.solmat.2015.11.015 ↗
17. Simultaneously efficient light absorption and charge separation in WO3/BiVO4 core/shell nanowire photoanode for photoelectrochemical water oxidation10.1021/nl500022z ↗
18. Electrochemical synthesis of p-type CuFeO2 electrodes for use in a photoelectrochemical cell10.1021/jz300709t ↗
19. p-Type CuBi2O4: an easily accessible photocathodic material for high-efficiency water splitting10.1039/C6TA01234E ↗