journal article·2018-05

CuInS2 quantum dot sensitized solar cells with high VOC ≈ 0.9 V achieved using microsphere-nanoparticulate TiO2 composite photoanode

P. Ilaiyaraja, Benadict Rakesh, Tapan Kumar Das, Pavana S.V. Mocherla, C. Sudakar

Publisher page

Abstract

Abstract CuInS2 (CIS) based solar cell devices are fabricated by sensitizing TiO2 photoanodes with CIS quantum dots (CIS-QDs). Morphologically different TiO2, viz. Degussa P25 nanoparticles, smooth and fibrous microspheres (SμS and FμS respectively) are used to fabricate photoanodes. CIS-QDs are synthesized using dodecanethiol (DDT), CuI and In(OAc)3 precursors by solvothermal method. DDT surfactant present on the CIS QDs surface is replaced with 3-mercaptopropionic acid in a single phase one step procedure to enable efficient loading of QDs onto photoanode and as linker molecule for charge carrier extraction. The CIS QDs sensitized on SμS and FμS microsphere photoanode layers exhibit a photoconversion efficiency (η) of 3.2% and 1.6%, respectively, in comparison to η ≈ 2.1% for nanoparticulate TiO2 (Degussa P25). Further increase in efficiency is obtained (3.8% for SμS and 2.5% for FμS) when composite photoanode films made of porous microspheres filled with nanoparticulate P25 are used. A maximum efficiency of 3.8% (with JSC ≈ 6.2 mA, VOC ≈ 926 mV and FF ≈ 66 for cell area ≈ 0.25 cm2 and thickness ≈ 20 µm) is realized when 4.6 nm CIS QDs sensitized on composite photoanode (consisting of 80 wt. % SμS and 20 wt. % P25) is used. High VOC observed is unprecedented and is possible due to combined effect of SμS+P25 composite photoanode properties such as fewer defects, good connectivity between particles, effective light scattering, minimum recombination, and effective electron transport and size optimized CuInS2 QDs. Electrochemical impedance spectroscopy studies reveal a low interfacial resistance and longer electron life time in SμS+P25 composite photoanodes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Photocatalysis Techniques · Quantum Dots Synthesis And Properties · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Third-generation photovoltaics10.1016/S1369-7021(07)70278-X ↗
2. Dye-Sensitized Solar Cells10.1021/cr900356p ↗
3. Quantum Dot Solar Cells. Semiconductor Nanocrystals as Light Harvesters10.1021/jp806791s ↗
4. Perovskite solar cells: an emerging photovoltaic technology10.1016/j.mattod.2014.07.007 ↗
5. Stability Issues on Perovskite Solar Cells10.3390/photonics2041139 ↗
6. Djurišić · Stab. Issues Gener. Sol. Cells, Phys. Status Solidi (RRL) – Rapid Res. Lett. · 2016 · 10 · 281
7. Quantum-dot-based solar cells: recent advances, strategies, and challenges10.1021/jz502227h ↗
8. Quantum dots and their multimodal applications: a review10.3390/ma3042260 ↗
9. Synthesis of eco-friendly CuInS2 quantum dot-sensitized solar cells by a combined ex situ / in situ growth approach10.1021/am403531q ↗
10. Improved conversion efficiency of CdS quantum dot-sensitized TiO2 nanotube-arrays using CuInS2 as a co-sensitizer and an energy barrier layer10.1039/c1jm13616j ↗
11. Fabrication of CuInS2-sensitized solar cells via an Improved SILAR process and its interface electron recombination10.1021/am402502a ↗
12. CuInS2-sensitized quantum dot solar cell. Electrophoretic deposition, excited-state dynamics, and photovoltaic performance10.1021/jz400181m ↗
13. Synthesis of (CuInS2)0.5(ZnS)0.5 alloy nanocrystals and their use for the fabrication of solar cells via selenization10.1021/cm501017z ↗
14. Toward the Facile and Ecofriendly Fabrication of quantum dot-sensitized solar cells via thiol Coadsorbent Assistance10.1021/acsami.6b05411 ↗
15. Cu and Cu-based nanoparticles: synthesis and applications in catalysis10.1021/acs.chemrev.5b00482 ↗
16. Solution-phase synthesis of titanium dioxide nanoparticles and nanocrystals10.1021/cr500170p ↗
17. Titanium dioxide nanomaterials: synthesis, properties, modifications, and applications10.1021/cr0500535 ↗
18. Comparison of Dye-Sensitized Rutile- and Anatase-Based TiO2 Solar Cells10.1021/jp994365l ↗
19. Synthesis and application of highly ordered arrays of TiO2 nanotubes10.1039/b701168g ↗
20. What is Degussa (Evonik) P25? Crystalline composition analysis, reconstruction from isolated pure particles and photocatalytic activity test10.1016/j.jphotochem.2010.07.024 ↗
21. Dextran templating for the synthesis of metallic and metal oxide sponges10.1038/nmat903 ↗
22. Hierarchical TiO2 microspheres: synthesis, structural control and their applications in dye-sensitized solar cells10.1039/c2ra22043a ↗
23. Hierarchical Oriented Anatase TiO2 Nanostructure arrays on Flexible Substrate for Efficient Dye-sensitized Solar Cells10.1038/srep01892 ↗
24. Template assisted nanoporous TiO2 nanoparticles: the effect of oxygen vacancy defects on photovoltaic performance of DSSC and QDSSC10.1016/j.solener.2017.11.061 ↗
25. Enhanced performance for dye-sensitized solar cells based on spherical TiO2 nanorod-aggregate light-scattering layer10.1016/j.jpowsour.2012.06.104 ↗
26. TiO2 Nanorods: a Facile size- and shape-Tunable Synthesis and effective improvement of charge collection kinetics for dye-sensitized solar cells10.1021/am502067r ↗
27. Enhanced efficiency of tri-layered dye solar cells with hydrothermally synthesized titania nanotubes as light scattering outer layer10.1016/j.tsf.2012.01.002 ↗
28. Efficient light scattering from one-pot solvothermally derived TiO2 nanospindles10.1021/ie200803q ↗
29. X. Huang, P. Shen, B. Zhao, X. Feng, S. Jiang, H. Chen, H. Li, S. Tan, Stainless steel mesh-based flexible quasi-solid dye-sensitized solar cells, 2010.10.1016/j.solmat.2010.02.005 ↗
30. Sol–gel nanostructured titanium dioxide: controlling the crystal structure, crystallite size, phase transformation, packing and ordering10.1016/j.micromeso.2007.10.015 ↗
31. Improved efficiency of dye-sensitized solar cells aided by corn-like TiO2 nanowires as the light scattering layer10.1016/j.electacta.2012.12.065 ↗
32. TiO2 nanosheets with highly exposed (001)-facets for enhanced photovoltaic performance of dye-sensitized solar cells10.1016/j.nanoen.2014.09.014 ↗
33. Ultrafine dice-like anatase TiO2 for highly efficient dye-sensitized solar cells10.1016/j.solmat.2014.11.020 ↗
34. Planar scattering from hierarchical anatase TiO2 nanoplates with variable shells to improve light harvesting in dye-sensitized solar cells10.1039/c1cc10548e ↗
35. Multifunctional TiO2 Microflowers with Nanopetals as Scattering Layer for Enhanced Quasi-Solid-State Dye-Sensitized Solar Cell Performance10.1002/celc.201300201 ↗
36. Enhanced Efficiency in Dye-Sensitized Solar Cells with Shape-Controlled Plasmonic Nanostructures10.1021/ph500281v ↗
37. Improving photoanodes to obtain highly efficient dye-sensitized solar cells: a brief review10.1039/C6MH00511J ↗
38. Composite multi-functional over layer: a novel design to improve the photovoltaic performance of DSSC10.1016/j.solmat.2015.04.011 ↗
39. Well-connected microsphere-nanoparticulate TiO2 composites as high performance photoanode for dye sensitized solar cell10.1016/j.solmat.2017.05.001 ↗
40. Size-Dependent Photovoltaic Performance of CuInS2 Quantum Dot-Sensitized Solar Cells10.1021/cm5040886 ↗
41. Influence of surface disorder, oxygen defects and bandgap in TiO2 nanostructures on the photovoltaic properties of dye sensitized solar cells10.1016/j.solmat.2015.08.036 ↗
42. Characterization of sprayed CuInS2 films by XRD and Raman spectroscopy measurements10.1016/j.tsf.2010.03.062 ↗
43. Surface-enhanced raman spectroscopy of dodecanethiol-bound silver nanoparticles at the liquid/liquid interface10.1021/la0603119 ↗
44. Raman scatering in orthorhombic CuInS2 nanocrystals10.1002/pssa.201330229 ↗
45. Synthesis of chalcopyrite nanoparticles via thermal decomposition of Metal-Thiolate10.2320/matertrans.MBW200724 ↗
46. Efficient white-light-emitting diodes fabricated from highly fluorescent copper indium sulfide core/shell quantum dots10.1021/cm300837z ↗
47. Reduced graphene oxide-supported aggregates of CuInS2 quantum dots as an effective hybrid electron acceptor for polymer-based solar cells10.1016/j.carbon.2015.09.068 ↗
48. High open-circuit voltage dye-sensitized solar cells based on a nanocomposite photoelectrode10.1117/1.JPE.5.053088 ↗
49. How the nature of triphenylamine-polyene dyes in dye-sensitized solar cells affects the open-circuit voltage and electron lifetimes10.1021/la902897z ↗
50. Boron and sulfur co-doped TiO2 nanofilm as effective photoanode for high efficiency CdS quantum-dot-sensitized solar cells10.1016/j.jpowsour.2014.08.116 ↗
51. Achievement of over 1.4V photovoltage in a dye-sensitized solar cell by the application of a silyl-anchor coumarin dye10.1038/srep35888 ↗
52. Open circuit voltage of organic solar cells: an in-depth review10.1039/C5EE02871J ↗
53. Can the incident photo-to-electron conversion efficiency be used to calculate short-circuit current density of dye-sensitized solar cells10.1016/j.cap.2011.03.060 ↗
54. Electrochemical impedance spectroscopic analysis of dye-sensitized solar cells10.1021/jp052768h ↗