Nanoscale doping profiles within CdTe grain boundaries and at the CdS/CdTe interface revealed by atom probe tomography and STEM EBIC
Source abstract
Abstract
Segregated elements and their diffusion profiles within grain boundaries and interfaces resulting from post deposition heat treatments are revealed using atom probe tomography (APT), scanning transmission electron microscopy (STEM), and electron beam induced current (EBIC) techniques. The results demonstrate how these techniques complement each other to provide conclusive evidence for locations of space charge regions and mechanisms that create them at the nanoscale. Most importantly, a Cl dopant profile that extends ~5 nm into CdTe grains interfacing the CdS is shown using APT and STEM synergy, which has been shown to push the pn-junction into the CdTe layer indicative of a homojunction (revealed by STEM EBIC). In addition, Cu and Cl concentrations within grain boundaries within several nms and μms from the CdS/CdTe interface are compared, Na segregation of <0.1% is detected, and S variations of ~1-3% are witnessed between CdTe grains close to the CdS/CdTe interface. The segregation and diffusion of these elements have a direct impact on the material properties, such as band gap energy and n/p type properties. Optimization of the interfacial and grain boundary doping will lead to higher efficiency solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Surface and Thin Film Phenomena · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Solar cell efficiency tables (Version 45)10.1002/pip.2573 ↗
2. Cathodoluminescence of Cu diffusion in CdTe thin films for CdTe/CdS solar cells10.1063/1.1515119 ↗
3. Doping of polycrystalline CdTe for high-efficiency solar cells on flexible metal foil
4. Electrical characterization of Cu composition effects in CdS/CdTe thin-film solar cells with a ZnTe:Cu back contact10.1109/JPHOTOV.2013.2257919 ↗
5. First‐principles study of doping limits of CdTe10.1002/1521-3951(200201)229:1<305::AID-PSSB305>3.0.CO;2-3 ↗
6. Tailoring impurity distribution in polycrystalline CdTe solar cells for enhanced minority carrier lifetime10.1002/aenm.201301400 ↗
7. CdTe solar cells at the threshold to 20% efficiency10.1109/JPHOTOV.2013.2278661 ↗
8. Direct imaging of Cl‐ and Cu‐induced short‐circuit efficiency changes in CdTe solar cells10.1002/aenm.201400454 ↗
9. S-Te interdiffusion within grains and grain boundaries in CdTe solar cells10.1109/JPHOTOV.2014.2351622 ↗
10. Grain-boundary-enhanced carrier collection in CdTe solar cells10.1103/PhysRevLett.112.156103 ↗
11. From atomic structure to photovoltaic properties in CdTe solar cells10.1016/j.ultramic.2013.06.010 ↗
12. Atomic-resolution characterization of the effects of CdCl2 treatment on poly-crystalline CdTe thin films10.1063/1.4893727 ↗
13. D.R. Diercks, J. Li, J.D. Beach, C.A. Wolden, B.P. Gorman, Atom probe tomography for nanoscale characterization of CdTe device absorber layers and interfaces, IEEE Photovoltaic Spec. Conf., 40th., 2014, pp. 0085–0089.10.1109/PVSC.2014.6925241 ↗
14. Atom probe tomography of compound semiconductors for photovoltaic and light-emitting device applications10.1017/S1551929512000235 ↗
15. Characterization of grain boundaries in Cu(In,Ga)Se2 films using atom-probe tomography10.1109/JPHOTOV.2011.2170447 ↗
16. Atom probe tomography analysis of grain boundaries in CdTe10.1017/S1431927612006496 ↗
17. Controlled activation of ZnTe:Cu contacted CdTe solar cells using rapid thermal processing10.1016/j.solmat.2014.10.045 ↗
18. Nanoscale measurement of laser-induced temperature rise and field evaporation effects in CdTe and GaN10.1021/acs.jpcc.5b02126 ↗
19. Larson · 2013
20. Miller · 2014
21. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
22. Methods for STEM EBIC and atom probe tomography of the CdS/CdTe interface in CdTe solar cells
23. Fabrication and characterization of high-efficiency CdTe-based thin-film solar cells on commercial SnO2:F-coated soda-lime glass substrates10.1016/j.tsf.2013.07.020 ↗
24. Low energy Ga+ and Ar+ ion milling for improved EBSD sample preparation10.1017/S1431927608081294 ↗
25. SRIM–The stopping and range of ions in matter (2010)10.1016/j.nimb.2010.02.091 ↗
26. Numerical simulation of cross section electron-beam induced current in thin-film solar-cells for low and high injection conditions10.1063/1.4823519 ↗
27. Local electrical characterization of cadmium telluride solar cells using low-energy electron beam10.1016/j.solmat.2013.07.024 ↗
28. Analysis of three-dimensional atom-probe data by the proximity histogram10.1007/S100050010051 ↗
29. Trajectory overlaps and local magnification in three-dimensional atom probe10.1063/1.126545 ↗
30. Enhancing the photo-currents of CdTe thin-film solar cells in both short and long wavelength regions10.1063/1.4901532 ↗
31. Optical energy gap of the mixed crystal CdSxTe1−x10.1143/JJAP.12.1641 ↗
32. Characterisation of CdS|CdTe heterojunctions by photocurrent spectroscopy and electrolyte electroreflectance/absorbance spectroscopy (EEA/EER)10.1016/S0022-0728(02)00730-1 ↗
33. Optical properties of CdTe1−xSx (0≤x≤1): experiment and modeling10.1063/1.369372 ↗
34. Na in selenized Cu(In, Ga)Se2 on Na-containing and Na-free glasses: distribution, grain structure, and device performances10.1016/S0040-6090(00)01028-2 ↗
35. The effect of Na in polycrystalline and epitaxial single-crystal CuIn1−xGaxSe210.1016/j.tsf.2004.11.038 ↗
36. Effect of chlorine activation treatment on electron beam induced current signal distribution of cadmium telluride thin film solar cells10.1063/1.4827204 ↗
37. S and Te inter-diffusion in CdTe/CdS hetero junction10.1016/j.solmat.2007.05.008 ↗
38. Physics and chemistry of CdTe/CdS thin film heterojunction photovoltaic devices: fundamental and critical aspects10.1039/C3EE41981A ↗
39. Egerton · 2011