journal article·2010-03

Influence of crystallizable solvent on the morphology and performance of P3HT:PCBM bulk-heterojunction solar cells

Anusit Keawprajak, Phimwipha Piyakulawat, Annop Klamchuen, Phansak Iamraksa, Udom Asawapirom

Publisher page

Abstract

Abstract In this work, we present the effect of 1,3,5-trichlorobenzene (TCB) on the morphology and performance of a 1:1(w/w) rr-P3HT:PCBM polymer/fullerene bulk-heterojunction solar cell. The UV–vis spectra of the rr-P3HT:PCBM polymer/fullerene formed from a blend with various TCB concentrations (0–28 mg/ml) indicate an enhanced absorption within the 500–600 nm wavelength range when formed in the presence of the TCB. By increasing the concentration of TCB in the blend, the resultant spun-cast film morphology was improved due to grain size reduction, and the polymer film quality can be further improved via an annealing process. Moreover, the device efficiency is also improved due to a good quality thin film nanostructure. With the optimized TCB quantity and annealing temperature, the power conversion efficiency (PCE) achieved with the solar cell was up to 20% better than that attained by a similar device without the presence of TCB.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Applications of atomic layer deposition to nanofabrication and emerging nanodevices10.1016/j.tsf.2008.09.007 ↗
2. Influence of the molecular weight of poly(3-hexylthiophene) on the performance of bulk heterojunction solar cells10.1021/cm047811c ↗
3. Cathode dependence of the open-circuit voltage of polymer: fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
4. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die and screen printing10.1016/j.solmat.2008.12.012 ↗
5. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
6. A complete process for production of flexible large area polymer solar cells entirely using screen printing-first public demonstration10.1016/j.solmat.2008.12.001 ↗
7. Significant improvement of polymer solar cell stability10.1021/cm051320q ↗
8. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
9. Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes10.1016/j.solmat.2008.01.013 ↗
10. Investigate of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene)10.1063/1.2008386 ↗
11. Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime10.1016/j.solmat.2008.01.004 ↗
12. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1-phenyl-(6,6) C61 blends10.1063/1.2006986 ↗
13. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
14. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
15. Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer:fullerene solar cells10.1016/j.solmat.2008.01.006 ↗
16. Recent progress in polymer solar cells: manipulation of polymer:fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗
17. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
18. Effects of nanomorphological changes on the performance of solar cells with blends of poly [9,9′-dioctyl-fluorene-co-bithiophene] and a soluble fullerene10.1088/0957-4484/20/2/025202 ↗
19. Processing additives for improved efficiency from bulk heterojunction solar cells10.1021/ja710079w ↗
20. Fabrication of oriented and periodic hybrid nanostructures of regioregular poly(3-hexylthiophene) and CdSe nanocrystals by directional epitaxial solidification10.1002/adma.200700311 ↗
21. Effect of molecular weight on the structure and morphology of oriented thin films of regioregular poly(3-hexylthiophene) grown by directional epitaxial solidification10.1002/adfm.200600673 ↗
22. A simple method to prepare head-to-tail coupled, regioregular poly(3-alkylthiophenes) using Grignard metathesis10.1002/(SICI)1521-4095(199903)11:3<250::AID-ADMA250>3.0.CO;2-J ↗
23. Synthesis of C60 derivatives for polymer photovoltaic cell10.1016/S0379-6779(02)00916-5 ↗
24. Influence of solvent mixing on the morphology and performance of solar cells based on polyfluorene copolymer/fullerene blends10.1002/adfm.200500339 ↗
25. Directional epitaxial crystallization and tentative crystal structure of poly(9,9′-di-n-octyl-2,7-fluorene)10.1021/ma071390d ↗
26. Solvent–vapor treatment induced performance enhancement of poly(3-hexylthiophene):methanafullerene bulk-heterojunction photovoltaic cells10.1063/1.2434173 ↗
27. Effects of film treatment on the performance of poly(3-hexylthiophene)/soluble fullerene-based organic solar cells10.1016/j.tsf.2007.08.066 ↗
28. Effect of interchain interaction on the absorption and emission of poly(3-hexylthiophene)10.1103/PhysRevB.67.064203 ↗
29. Origin of the open-circuit voltage in multilayer heterojunction organic solar cells10.1063/1.3027061 ↗
30. High-efficiency polymer photovoltaic devices from regioregular-poly(3-hexylhiophene-2,5-diyl) and [6,6]-phenyl-C61-butyric acid methyl ester processed with oleic acid surfactant10.1063/1.2735937 ↗
31. Polythiophene based bulk heterojunction solar cells: morphology and its implications10.1016/j.tsf.2005.12.031 ↗