Optimization design of CuCrxMn2−xO4-based paint coatings used for solar selective applications
Source abstract
Abstract
Abstract CuCr x Mn 2− x O 4 ( x =0.5, 1) spinels, novel pigments for spectrally selective paints, have been prepared through a sol–gel combustion synthesis process. Thickness Sensitive Spectrally Selective (TSSS) paint coatings, using CuCr x Mn 2− x O 4 ( x =0.5, 1) obtained at varied calcined temperatures (500∼1100 °C) as pigment, were deposited on top of aluminum substrates by an cost-effective spray coating method and characterized by reflectance measurements over the spectral range of 0.3–20 μm. Influence of pigment species and coating thickness on optical properties of paint coatings was investigated. Results suggest that CuCr 0.5 Mn 1.5 O 4 -based coatings are more favorable than CuCrMnO 4 -based ones and coatings using 700 °C calcined CuCr 0.5 Mn 1.5 O 4 as pigment exhibit the optimum spectral selectivity ( α s =0.92∼0.93, e T =0.22∼0.31). Difference in powder thermal emittances reveals that suitable pigments can be pre-chosen before fabricating paint coatings to obtain optimum spectral selectivity. Long-term stability tests of the TSSS paint coatings were performed according to the methodology worked out within IEA-SHC Task X and the results confirmed that coatings in this study could be safely used during collector's lifetime without degradation in performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Pigment Synthesis and Properties · Transition Metal Oxide Nanomaterials · Color Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Sol–gel combustion-derived CoCuMnOx spinels as pigment for spectrally selective paints10.1111/j.1551-2916.2010.04182.x ↗
2. Low-temperature combustion synthesis of CuCr2O4 spinel powder for spectrally selective paints10.1007/s10971-011-2625-2 ↗
3. Cation distribution in the CuxMn3-xO4 and CuMxMn2-xO4 (M=Cr, Al) spinels, Inorg10.1023/A:1012390407055 ↗
4. Preparation and characterization of brown nanometer pigment with spinel structure10.1016/S0143-7208(02)00056-6 ↗
5. Comparative study of the microstructural and magnetic properties of spinel ferrites obtained by co-precipitation10.1016/j.jallcom.2003.09.101 ↗
6. Comparison of blue pigments prepared by two different methods10.1016/S0955-2219(02)00057-2 ↗
7. Thermal study of CoxZn7-xSb2O12 spinel obtained by Pechini method using different alcohols10.1023/B:JTAN.0000027132.98057.ac ↗
8. Cobalt spinel CoAl2O4 via sol–gel process: elaboration and surface properties10.1016/S0025-5408(00)00444-X ↗
9. The effects of Co, Ni and Mn on the thermal processing of Zn2TiO4 pigments10.1007/s10973-005-0084-0 ↗
10. Sol–gel combustion synthesis of nanocrystalline LaMnO3 powders and photocatalystic properties10.1007/s10853-009-3673-7 ↗
11. Combustion synthesis and characterization of nano-crystalline LaFeO3 powder, Phys10.1002/pssa.200824266 ↗
12. Evaluation of NiFe2O4 ferrite nanocrystalline powder synthesized by a sol–gel auto-combustion method10.1016/j.jnoncrysol.2006.12.044 ↗
13. Structural characterization of nano-crystalline BaFe12O19 powders synthesized by sol-gel combustion route10.1016/j.scriptamat.2005.06.037 ↗
14. Silicone-based thickness insensitive spectrally selective (TISS) paints as selective paint coatings for coloured solar absorbers (Part I)10.1016/j.solmat.2006.07.013 ↗
15. Selective paint coatings for coloured solar absorbers: Polyurethane thickness insensitive spectrally selective (TISS) paints (Part II)10.1016/j.solmat.2006.07.012 ↗
16. Spectrally selective materials for efficient visible, Solar and thermal radiation control
17. Synthesis and characterization of nanocrystalline CoAl2O4 spinel powder by low temperature combustion10.1016/S0955-2219(03)00081-5 ↗
18. Effects of molar ratio of citric acid to cations and of pH value on the formation and thermal-decomposition behavior of barium titanium citrate10.1111/j.1151-2916.1999.tb01931.x ↗
19. Nakamoto · 1986
20. Chemical synthesis of PZT powder by auto-combustion of citrate-nitrate gel10.1016/S0167-577X(96)00191-7 ↗
21. Optical properties of some metal oxides in solar absorbers10.1088/0031-8949/25/6A/044 ↗
22. Preparation and characterization of low-emitting black zinc pigment for spectrally selective paints10.1016/0165-1633(91)90025-G ↗
23. T.P. Woodman, Paint composition for the spectrally selective coating of metal surfaces, method of producing coatings therewith and an article produced thereby, US Patent no. 4277537, 1981.
24. Spectrally selective surfaces of cuprous oxide (Cu2O)10.1016/0165-1633(81)90033-2 ↗
25. Adhesion and thermal stability of thickness insensitive spectrally selective (TISS) polyurethane-based paint coatings on copper substrates10.1016/j.solmat.2008.12.026 ↗
26. Spectrally selective paint coatings: Preparation and characterization10.1016/S0927-0248(00)00367-6 ↗
27. Preparation of selective absorbers based on CuMn spinels by dip-coating method10.1016/j.renene.2007.05.017 ↗
28. Characterization of copper-manganese-oxide thin films deposited by dip-coating10.1016/j.solmat.2008.04.011 ↗
29. Durability test and up-scaling of selective absorbers based on copper-manganese oxide deposited by dip-coating10.1016/j.solmat.2010.02.006 ↗
30. B. Carlsson, U. Frei, M. Köhl, K. Möller, Accelerated life testing of solar energy materials, Report of Task X Solar Materials Research and Development, International Energy Agency Solar Heating and Cooling Program, 1994.
31. Durability tests of solution-chemically derived spectrally selective absorbers10.1016/j.solmat.2005.01.014 ↗
32. Life expectancy prediction and thickness insensitive spectrally selective paint coatings for solar absorbers10.1016/j.solmat.2011.05.014 ↗