Variable solar control using thermotropic core/shell particles
Source abstract
Abstract
Abstract Subject of our recent investigations is the utilization of a reversible thermotropic material for a self-regulating sun protection glazing that controls the solar energy input in order to avoid overheating. Based on the well-established UV curing technology for laminated glass a superior thermotropic material with tunable switching characteristics and of low material costs was developed. The polymer layer contains core/shell particles homogeneously dispersed in a UV-cured resin. The particle core in turn consists of an n -alkane mixture that is responsible for the temperature-induced clear/opaque switching. To obtain particles of well-defined size and with a narrow size distribution, the miniemulsion polymerization technique was used. The visible and solar optical properties (normal–normal, normal–hemispherical, and normal–diffuse transmittance) in the off (clear) and in the on state (opaque) were determined by UV/Vis/NIR spectroscopy. Samples containing particles of high median diameter (>800 nm) primarily scatter in the forward direction. However, with smaller particles (300–600 nm) a higher backscattering (reflection) efficiency was achieved. The largest difference in the normal–hemispherical transmittance could be found with a particle amount of 6% and a median scattering domain diameter of ∼380 nm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building Energy and Comfort Optimization · Transition Metal Oxide Nanomaterials · Urban Heat Island Mitigation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Ritter · 2006
2. Chromogenic smart materials10.1016/S1369-7021(04)00123-3 ↗
3. Solar control with thermotropic layers10.1016/j.solener.2004.12.009 ↗
4. Materials for solar energy conversion: an overview10.1016/S0927-0248(97)00221-3 ↗
5. Materials for intelligent sun protecting glazing10.1016/S0927-0248(99)00087-2 ↗
6. Thermotropic layers for flat-plate collectors—a review of various concepts for overheating protection with polymer materials10.1016/j.solmat.2008.09.004 ↗
7. D. Charoudi, Transparent thermal insulating system, US 3953110, 1976.
8. W. Dabisch, Body with reversibly changeable temperature dependent extinction of light and method for the manufacture of this body, EP 000868, 1978.
9. S. Meinhardt, U. Schönfeld, H. Gödeke, Thermo-optical polymer material providing reversible shading, DE 4433090, 1994.
10. T. Bicer, H. Gödeke, J. Werner, U. Schönfeld, Method for producing a thermooptical variable polymerized material, and use of same, EP 0946443, 1997.
11. T. Bicer, C. Schwitalla, H. Gödecke, Method for producing thermotropic casting resin systems, DE 19825984, 1998.
12. F.S. Bühler, M. Hewel, Reversible thermotropic composition, its preparation and use, EP 0985709, 1999.
13. C. Schwitalla, H. Gödecke, N. König, Thermotropic foil and method of manufacturing the same, EP 1258504, 2001.
14. Thermally reversible light scattering films based on droplets of liquid crystal (N-4-ethoxybenzylidene-4′-n-butylaniline)/polystyrene solution dispersed in an epoxy matrix10.1021/ma0496955 ↗
15. Mechanistic study of thermoreversible recording media composed of polymer film with dispersed fatty acids10.1021/cm00058a007 ↗
16. Spectroscopic investigations of phase-separated thermotropic layers based on UV cured acrylate resins10.1002/masy.200850506 ↗
17. Unpublished results, Fraunhofer IAP, Department of Chromogenic Polymers.
18. Preparation of polymeric nanocapsules by miniemulsion polymerization10.1021/la001276n ↗
19. Encapsulation through (mini)emulsion polymerization
20. Crystallization and prevention of supercooling of microencapsulated n-alkanes10.1016/j.jcis.2004.08.046 ↗
21. Bestimmung der lichttechnischen und strahlungsphysikalischen Kenngrößen von Verglasungen, European Standard EN 410, Deutsche Fassung, European Committee for Standardization, Brüssel, 1998.
22. Preparation, characterization, and thermal properties of microencapsulated phase change material for thermal energy storage10.1016/j.solmat.2008.09.009 ↗
23. Phase change materials for smart textiles—an overview10.1016/j.applthermaleng.2007.08.009 ↗
24. Simulation of multiply scattering media10.1016/S0927-0248(98)00081-6 ↗
25. P. Nitz, Optische Modellierung und Vermessung thermotroper Systeme, Ph.D. Thesis, Fakultät für Physik, Albert-Ludwigs-Universität Freiburg im Breisgau, 1999.
26. Bohren · 1998
27. Near infrared spectra of organic compounds10.1021/cr50028a004 ↗