Environmental-friendly electrospun phase change fiber with exceptional thermal energy storage performance
Source abstract
Abstract
Abstract Electrospun phase change fiber (PCF) releases more than 85 wt% of organic solvents yet suffers from long-term thermal cycling-induced leakage. In this contribution, a novel PEG/PVA composite PCF was obtained by electrospinning their aqueous solution instead of using organic solvent in traditional method, which makes design of PCF towards green and cost-effective direction. Meanwhile, a simple surface crosslinking technology was applied to prevent leakage of PEG during the long-term service, and improve the thermal stability and tensile strength of the obtained crosslinked PCF (CPCF). The CPCF-50 shows the optimal morphological structure and exhibits the a relative high latent heat of 72.3 J/g. Owing to the confinement effect, CPCF exhibits robust thermal, chemical, and morphological stability with respect to 1000 thermal cycling. The CPCF also shows exceptional temperature regulation capability. The thermoregualting times of heating and freezing processes of CPCF-50 are 59.0% and 89.5% longer than those of the control and CPCF-0, respectively. Therefore, the eco-friendly and cost-effective prepared CPCF in this work, which exhibits relatively high latent heat and long-term reliability, paves a new way for the large-scale production of phase change fiber for thermal energy storage application.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Natural microtubule-encapsulated phase-change material with simultaneously high latent heat capacity and enhanced thermal conductivity10.1021/acsami.9b04523 ↗
2. Experimental study on characteristics of a nano-enhanced phase change material slurry for low temperature solar energy collection10.1016/j.solmat.2020.110513 ↗
3. Natural microtubule encapsulated phase change material with high thermal energy storage capacity10.1016/j.energy.2019.02.052 ↗
4. Experimental investigation on improvement of latent heat and thermal conductivity of shape-stable phase-change materials using modified fly ash10.1016/j.jclepro.2019.118952 ↗
5. A strategy for designing microencapsulated composite phase change thermal storage materials with tunable melting temperature10.1016/j.solmat.2019.110166 ↗
6. Carbonized wood flour matrix with functional phase change material composite for magnetocaloric-assisted photothermal conversion and storage10.1016/j.energy.2020.117636 ↗
7. Polyethylene glycol/halloysite@Ag nanocomposite PCM for thermal energy storage: simultaneously high latent heat and enhanced thermal conductivity10.1016/j.solmat.2019.01.023 ↗
8. Biomass carbon aerogels based shape-stable phase change composites with high light-to-thermal efficiency for energy storage10.1016/j.renene.2020.02.008 ↗
9. Eco-friendly electrospun nanofibrous membranes with high thermal energy capacity and improved thermal transfer efficiency10.1016/j.renene.2019.10.056 ↗
10. Thermal behavior and shape-stabilization of fatty acid eutectics/electrospun carbon nano-felts composite phase change materials enhanced by reduced graphene oxide10.1016/j.solmat.2018.11.042 ↗
11. Novel network structural PEG/PAA/SiO2 composite phase change materials with strong shape stability for storing thermal energy10.1016/j.solmat.2020.110678 ↗
12. Long alkyl chain-grafted carbon nanotube-decorated binary-core phase-change microcapsules for heat energy storage: synthesis and thermal properties10.1016/j.solmat.2020.110589 ↗
13. Polyethylene glycol/silica (PEG@SiO2) composite inspired by the synthesis of mesoporous materials as shape-stabilized phase change material for energy storage10.1016/j.renene.2019.05.118 ↗
14. Micro-/macro-level optimization of phase change material panel in building envelope10.1016/j.energy.2020.116932 ↗
15. Storing solar energy within Ag-Paraffin@Halloysite microspheres as a novel self-heating catalyst10.1016/j.apenergy.2018.04.013 ↗
16. Form-stable and light-to-thermal conversion properties of comb-like polymer composite phase change materials for thermal management application10.1016/j.solmat.2020.110704 ↗
17. High temperature shape Stabilized phase change materials obtained using mesoporous silica and NaCl-NaBr-Na2MoO4 salt eutectic10.1016/j.solmat.2020.110760 ↗
18. Stearic-capric acid eutectic/activated-attapulgiate composite as form-stable phase change material for thermal energy storage10.1016/j.enconman.2014.02.045 ↗
19. Morphology-controlled synthesis of microencapsulated phase change materials with TiO2 shell for thermal energy harvesting and temperature regulation10.1016/j.energy.2019.01.151 ↗
20. New hybrid suspension of MEPCM/GO particles with enhanced dispersion stability and thermo-physical properties10.1016/j.apenergy.2019.113827 ↗
21. A high-efficiency ultrafiltration nanofibrous membrane with remarkable antifouling and antibacterial ability10.1039/C8TA02649A ↗
22. Enhanced piezoelectric response in nanoclay induced electrospun PVDF nanofibers for energy harvesting10.1016/j.energy.2019.01.043 ↗
23. Melt coaxial electrospinning: a versatile method for the encapsulation of solid materials and fabrication of phase change nanofibers10.1021/nl0620839 ↗
24. Electrospun phase change fibers based on polyethylene glycol/cellulose acetate blends10.1016/j.apenergy.2011.02.026 ↗
25. Electrospun nanofibrous mats absorbed with fatty acid eutectics as an innovative type of form-stable phase change materials for storage and retrieval of thermal energy10.1016/j.solmat.2012.10.022 ↗
26. Ultrafine electrospun fibers based on stearyl stearate/polyethylene terephthalate composite as form stable phase change materials10.1016/j.cej.2009.03.007 ↗
27. Fabrication and characterization of electrospun SiO2 nanofibers absorbed with fatty acid eutectics for thermal energy storage/retrieval10.1016/j.solmat.2014.08.030 ↗
28. Ultrafine lauric-myristic acid eutectic/poly (meta-phenylene isophthalamide) form-stable phase change fibers for thermal energy storage by electrospinning10.1016/j.apenergy.2016.04.061 ↗
29. Morphology and performances of electrospun polyethylene glycol/poly (dl-lactide) phase change ultrafine fibers for thermal energy storage10.1016/j.solmat.2013.07.001 ↗
30. Effects of nano-SiO2 on morphology, thermal energy storage, thermal stability, and combustion properties of electrospun lauric acid/PET ultrafine composite fibers as form-stable phase change materials10.1016/j.apenergy.2010.12.071 ↗
31. Crosslinking of the electrospun polyethylene glycol/cellulose acetate composite fibers as shape-stabilized phase change materials10.1016/j.matlet.2008.11.033 ↗
32. Electrospun ultrafine composite fibers consisting of lauric acid and polyamide 6 as form-stable phase change materials for storage and retrieval of solar thermal energy10.1016/j.solmat.2012.04.031 ↗
33. Electrospun poly(vinyl alcohol)/phase change material fibers: morphology, heat properties, and stability10.1021/acs.iecr.5b01822 ↗
34. Integration of phase-change materials with electrospun fibers for promoting neurite outgrowth under controlled release10.1002/adfm.201705563 ↗
35. Review on electrospun ultrafine phase change fibers (PCFs) for thermal energy storage10.1016/j.apenergy.2017.11.001 ↗
36. Composite nanofibrous sheets of fatty acids and polymers as thermo-regulating enclosures10.1016/j.solmat.2016.07.033 ↗
37. Fabrication of phase-change core/shell nanofibers based on a eutectic fatty acid mixture to control body temperature fluctuations10.1016/j.matchemphys.2020.122738 ↗
38. In-situ crosslinked PVA/organosilica hybrid membranes for pervaporation separations10.1016/j.memsci.2015.10.025 ↗
39. Pervaporation performance of crosslinked PVA membranes in the vicinity of the glass transition temperature10.1016/j.memsci.2018.02.021 ↗
40. Crosslinking of polyvinyl alcohol (PVA) fibrous membranes with glutaraldehyde and PEG diacylchloride10.1002/app.31750 ↗
41. In situ cross-linking of electrospun poly(vinyl alcohol) nanofibers10.1021/ma902269p ↗
42. Crosslinking reaction of poly(vinyl alcohol) with glyoxal10.1007/s10965-009-9362-z ↗
43. Crosslinked electrospun PVA nanofibrous membranes: elucidation of their physicochemical, physicomechanical and molecular disposition10.1088/1758-5082/4/2/025002 ↗
44. Electrospun poly (vinyl alcohol)/phase change material fibers: morphology, heat properties, and stability10.1021/acs.iecr.5b01822 ↗
45. Preparation and thermal properties of molecular-bridged expanded graphite/polyethylene glycol composite phase change materials for building energy conservation10.3390/ma11050818 ↗
46. Fabrication of nanofibers with phase-change core and hydrophobic shell, via coaxial electrospinning using nontoxic solvent10.1007/s10853-015-9118-6 ↗
47. Fabrication of polyethylene glycol/polyvinylidene fluoride core/shell nanofibers via melt electrospinning and their characteristics10.1016/j.solmat.2012.04.029 ↗
48. Fabrication and characterization of phase change material composite fibers with wide phase-transition temperature range by co-electrospinning method10.1016/j.apenergy.2016.08.136 ↗
49. Encapsulation of bio-based PCM with coaxial electrospun ultrafine fibers10.1039/c2ra20532g ↗
50. Thermo and light-responsive phase change nanofibers with high energy storage efficiency for energy storage and thermally regulated on-off drug release devices10.1016/j.cej.2019.121979 ↗
51. A multi-functional textile that combines self-cleaning, water-proofing and VO2-based temperature-responsive thermoregulating10.1016/j.solmat.2016.08.020 ↗
52. Experimental and numerical studies of a fatty acid based phase change dispersion for enhancing cooling of high voltage electrical devices10.1016/j.energy.2020.117280 ↗