journal article·2019-05

Application of SiO2 passivation technique in mass production of silicon solar cells

Y.F. Zhuang, S.H. Zhong, X.J. Liang, H.J. Kang, Z.P. Li, W.Z. Shen

Publisher page

Abstract

Abstract Effective surface passivation is one of the primary prerequisites for high-efficiency silicon solar cells. In this paper, high-quality silicon dioxide (SiO2) films with excellent surface passivation abilities have been realized by thermal oxidation and plasma-enhanced chemical vapor deposition, respectively. By employing SiO2 capped with hydrogenated silicon nitride (SiNx:H) (SiO2/SiNx:H stacks) as the front passivation layers, the emitter saturation current density has been reduced from 90.5 fA/cm2 to 62.3 fA/cm2. We have successfully mass-produced thermal-oxidized p-type Czochralski-Si (CZ-Si) solar cells with high conversion efficiency (η) of 20.1%, which is 0.2% absolutely higher than that of the conventional Al back surface field (Al-BSF) solar cells. With a rational design of process integration, we have further presented a cost-effective way to fabricate high-efficiency SiO2 passivated emitter and rear cells (PERCs) at an existing production line. The introduction of SiO2/SiNx:H stacks on the rear surface can effectively increase the long wavelength response and the rear surface recombination is also suppressed with a rather low surface recombination velocity of 26 cm/s achieved after a post-annealing process. The industrial SiO2 passivated p-type CZ-Si PERCs possess outstanding performances with the average η of 21.3% and the highest η of over 21.9%, absolute 1.3% increment in average η compared with the conventional Al-BSF solar cells. Moreover, we have demonstrated that the relative low illumination response (below 50 W/m2) loss of our SiO2 PERCs over a day is extremely limited to be less than 0.2%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. 22.8% efficient silicon solar cell10.1063/1.101596 ↗
2. Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells10.1116/1.4728205 ↗
3. Symmetrical Al2O3-based passivation layers for p- and n-type silicon10.1016/j.solmat.2014.06.005 ↗
4. Emitter saturation current densities of 22 fA/cm2 applied to industrial PERC solar cells approaching 22% conversion efficiency10.1002/pip.2806 ↗
5. Efficiency enhancement of bifacial PERC solar cells with laser doped selective emitter and double-screen-printed Al grid10.1002/pip.3013 ↗
6. Silicon surface passivation by atomic layer deposited Al2O310.1063/1.2963707 ↗
7. On the c-Si surface passivation mechanism by the negative-charge-dielectric Al2O310.1063/1.3021091 ↗
8. Stability of Al2O3 and Al2O3/a-SiNx:H stacks for surface passivation of crystalline silicon10.1063/1.3264572 ↗
9. 20.8% industrial PERC solar cell: ALD Al2O3 rear surface passivation, efficiency loss mechanisms analysis and roadmap to 24%10.1016/j.solmat.2016.11.018 ↗
10. A.G. Meyer Burger, Deposition of backside AlOx/SiN stacks and front SiN for high efficient (bifacial) PERC solar cells in only one process system: MAiA 3in1, in: Proceedings of the 13th China SoG Silicon and PV Power Conference, 2017.
11. Improved homogeneous emitter solar cells with double layer anti-reflection coatings10.1016/j.egypro.2012.07.084 ↗
12. Industrial silicon solar cells applying the passivated emitter and rear Cell (PERC) concept—a review10.1109/JPHOTOV.2016.2571627 ↗
13. Green · 1995
14. “Zero-charge” SiO2/Al2O3 stacks for the simultaneous passivation of n+ and p+ doped silicon surfaces by atomic layer deposition10.1016/j.solmat.2015.07.040 ↗
15. Effective passivation of p+ and n+ emitters using SiO2/Al2O3/SiNx stacks: surface passivation mechanisms and application to industrial p-PERT bifacial Si solar cells10.1016/j.solmat.2018.07.007 ↗
16. SiO2 passivation layer grown by liquid phase deposition for silicon solar cell application10.1007/s11708-016-0429-3 ↗
17. Low temperature silicon oxide and nitride for surface passivation of silicon solar cells10.1016/S0927-0248(01)00058-7 ↗
18. Properties of purified direct steam grown silicon thermal oxides10.1016/j.solmat.2011.03.002 ↗
19. Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells10.1116/1.4728205 ↗
20. Influence of the SiO2 interlayer thickness on the density and polarity of charges in Si/SiO2/Al2O3 stacks as studied by optical second-harmonic generation10.1063/1.4857075 ↗
21. Silicon surface passivation by thin thermal oxide/PECVD layer stack systems10.1109/JPHOTOV.2011.2173299 ↗
22. High surface passivation quality and thermal stability of ALD Al2O3 on wet chemical grown ultra-thin SiO2 on silicon10.1016/j.egypro.2011.06.197 ↗
23. 19.4%-efficient large-area fully screen-printed silicon solar cells10.1002/pssr.201105045 ↗
24. K.A. Munzer, J. Schone, M. Hein, A. Teppe, R.E. Schlosser, M. Hanke, J. Maier, K. Varner, S. Keller, P. Fath, Development and implementation of 19% rear passivation and local contact Centaurus technology, in: Proceedings of the 26th European Photovoltaic Solar Energy Conference, 2011, p. 2292.
25. Integration of Al2O3 as front and rear surface passivation for large-area screen-printed p-type Si PERC10.1016/j.egypro.2012.07.071 ↗
26. Broadband spectral response of diamond wire sawn mc-Si solar cell with omnidirectional performance and improved appearance10.1016/j.solmat.2017.12.039 ↗
27. D. Kane, R. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the 18th IEEE Photovoltaic Specialists Conference,1985, p. 578.
28. Improving metal reflectors by suppressing surface plasmon polaritons: a priori calculation of the internal reflectance of a solar cell10.1038/lsa.2013.62 ↗
29. S.C. Shenzhen, PERC technology: Introduction to KOH system alkaline etching/polishing process, in: Proceedings 4th PERC Solar Cell and Bifacial Module Forum, 2018.
30. Optimization of PECVD-ONO rear surface passivation layer through improved electrical property and thermal stability10.1016/j.vacuum.2013.07.003 ↗
31. Dimensionless solution of the equation describing the effect of surface recombination on carrier decay in semiconductors10.1063/1.357521 ↗
32. Improved quantitative description of Auger recombination in crystalline silicon10.1103/PhysRevB.86.165202 ↗
33. High-efficiency silicon solar cells: fill factor limitations and non-ideal diode behavior due to voltage-dependent rear surface recombination velocity10.1002/pip.4670010204 ↗