journal article·2016-12

The optimal TiO2/Ag/TiO2 electrode for organic solar cell application with high device-specific Haacke figure of merit

Zhao Zhao, T.L. Alford

Publisher page

Abstract

Abstract As a promising indium-free electrode, transparent composite electrode (TCE) TiO 2 /Ag/TiO 2 is an attractive alternative to indium tin oxide (ITO). The multilayer structure of TiO 2 /Ag/TiO 2 is deposited on glass substrate by room-temperature sputtering. The effects of deposition rate, thickness of Ag and TiO 2 layers on the electrical and optical properties of this TCE are presented. Results show that the Ag films tend to have fewer voids to form, if the Ag deposition rate is sufficiently high. The presence of fewer voids in the Ag layer results in higher transmittance and lower sheet resistance of the corresponding TiO 2 /Ag/TiO 2 structure. In order to increase the solar input to the P 3 HT:PC 61 BM organic solar cell, the layer thicknesses of TiO 2 /Ag/TiO 2 electrodes are theoretically and then experimentally optimized, such that its optical transmittances are maximized across the wavelength range where the light absorption of P 3 HT:PC 61 BM is highest. In this study, the device-specific Haacke figure of merit (FOM) of the TiO 2 /Ag/TiO 2 electrode is optimal with the use of 42 nm TiO 2 layers and 10 nm Ag layer. This optimal Haacke FOM is two times higher than that of ITO electrodes. The conventional bulk heterojunction organic solar cell (OSC) fabricated on optimized TiO 2 /Ag/TiO 2 electrode shows high power conversion efficiency (PCE), almost 100% higher than PCE of OSC fabricated on ITO. Our finding indicates that TiO 2 /Ag/TiO 2 electrode can be specifically tailored to particular applications. It can be implemented in organic solar cell and has considerable potential to replace ITO in solar cell applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · Organic Electronics and Photovoltaics · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Conduction and transmission analysis in gold nanolayers embedded in zinc oxide for flexible electronics10.1063/1.3435467 ↗
2. High quality transparent TiO2/Ag/TiO2 composite electrode films deposited on flexible substrate at room temperature by sputtering10.1063/1.4808438 ↗
3. Optimization of Nb2O5/Ag/Nb2O5 multilayers as transparent composite electrode on flexible substrate with high figure of merit10.1063/1.4767662 ↗
4. Enhancement of light extraction efficiency of organic light emitting diodes using nanostructured indium tin oxide10.1364/OL.37.000575 ↗
5. Effect of gold thickness and annealing on optical and electrical properties of TiO2/Au/TiO2 multilayers as transparent composite electrode on flexible substrate10.1007/s11837-015-1346-3 ↗
6. ITO/Ag/ITO multilayer-based transparent conductive electrodes for ultraviolet light-emitting diodes10.1364/OL.38.005055 ↗
7. Structure, optical and electrical properties of Al: ZnO thin films deposited by DC sputtering at room temperature on glass and plastic substrates10.1002/pssa.200925061 ↗
8. TCO/metal/TCO structures for energy and flexible electronics10.1016/j.tsf.2011.06.091 ↗
9. ZnO/Ag/ZnO multilayer films for the application of a very low resistance transparent electrode10.1016/j.apsusc.2005.09.021 ↗
10. A. Dhar, T.L. Alford, Optimization of IGZO/Cu/IGZO Multilayers as Transparent Composite Electrode on Flexible Substrate by Room-temperature Sputtering and Post-Deposition Anneals, in: MRS Proceedings, Cambridge Univ Press, 2013, pp. mrss13-1577-xx1503-1533.10.1557/opl.2013.661 ↗
11. Effect of Different Substrates on the Wettability and Electrical Properties of Au Thin Films Deposited by Sputtering10.1007/s11837-015-1347-2 ↗
12. Comparison of electrical, optical, structural, and interface properties of IZO-Ag-IZO and IZO-Au-IZO multilayer electrodes for organic photovoltaics10.1063/1.3294605 ↗
13. Optimization of TiO2/Cu/TiO2 multilayer as transparent composite electrode (TCE) deposited on flexible substrate at room temperature10.1149/2.0061411ssl ↗
14. Improved conductivity and mechanism of carrier transport in zinc oxide with embedded silver layer10.1063/1.2829788 ↗
15. Investigation of low resistance transparent MoO3/Ag/MoO3 multilayer and application as anode in organic solar cells10.1016/j.tsf.2009.12.031 ↗
16. Design of dielectric/metal/dielectric transparent electrodes for flexible electronics10.1117/1.JPE.2.021215 ↗
17. The structure of evaporated metal films and their optical properties10.1364/JOSA.40.000203 ↗
18. Optical effect of surface morphology of Ag on multilayer electrode applications for OLEDs10.1109/LED.2013.2293574 ↗
19. Optical absorption and light scattering in microcrystalline silicon thin films and solar cells10.1063/1.373635 ↗
20. Beckmann · 1987 · 511 · 1
21. Prediction of transmittance spectra for transparent composite electrodes with ultra-thin metal layers10.1063/1.4936316 ↗
22. Roughening conjugated polymer surface for enhancing the charge collection efficiency of sequentially deposited polymer/fullerene photovoltaics10.3390/polym7081466 ↗
23. New figure of merit for transparent conductors10.1063/1.323240 ↗
24. Choy · 2013
25. Electron and hole transport layers: their use in inverted bulk heterojunction polymer solar cells10.3390/electronics3010132 ↗
26. MoO3 thickness, thermal annealing and solvent annealing effects on inverted and direct polymer photovoltaic solar cells10.3390/ma5122521 ↗
27. Enhancement in photovoltaic properties of plasmonic nanostructures incorporated organic solar cells processed in air using P3HT: PCBM as a model active layer10.1515/oph-2015-0006 ↗
28. Optimized ITO-free tri-layer electrode for organic solar cells10.1016/j.orgel.2013.01.030 ↗
29. Improved efficiency of P3HT: PCBM solar cells by incorporation of silver oxide interfacial layer10.1063/1.4891246 ↗