journal article·2016-03

Solar selective absorbers with foamed nanostructure prepared by hydrothermal method on stainless steel

Xingli Wang, Xiaofeng Wu, Long Yuan, Cuiping Zhou, Yanxiang Wang, Keke Huang, Shouhua Feng

Publisher page

Abstract

Abstract Currently, solar absorber plays a key role among all components of the concentrating solar power (CSP) system, which is considered as an important way for solar energy utilization. Due to the outstanding features of surface texture, nano-structured materials have been extensively utilized for solar energy harvesting and conversion, but most of them were synthesized by expensive or complicated techniques. Herein, for the first time, solar selective absorbers with uniquely foamed nanostructure, are grown in situ by facile hydrothermal method on stainless steel, without using any porogen or template. The selective absorber films, which comprised a large number of nanoparticle agglomerates and nanopores, have a vital role on the solar selective absorptance owing to the increased optical path as well as enhanced sunlight trapping via foamed nanostructure. They show an excellent solar thermal performance with the solar absorptance and the thermal emittance of 0.92 and 0.12, respectively. Besides, the solar absorber films also exhibit considerable solar thermal performance and benign thermal stability at high temperature. Due to the relieving internal stresses from foamed nanostructure, there is no obvious cracking within the entire structure even after heat treatment. Consequently, the hydrothermal method used in the present investigation happens to be a novel, pollution-free, low-cost, and suitable for simultaneous mass production for large-size absorber films. Moreover, the pre-treatment of substrate and post-treatment of films are also very convenient and environmental, without any complex procedure. Accordingly, the resultant films with foamed nanostructure will have a good prospect as a new-family of solar selective absorbers, which may have a tremendous potential for industrial production in the future.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar-Powered Water Purification Methods · Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. A review of cermet-based spectrally selective solar absorbers10.1039/c3ee43825b ↗
2. Silica-carbon nanocomposites: a new concept for the design of solar absorbers10.1002/1616-3028(200203)12:3<197::AID-ADFM197>3.0.CO;2-A ↗
3. C.E. Kennedy, , 2002.10.2172/15000706 ↗
4. Nanomaterials and nanostructures for efficient light absorption and photovoltaics10.1016/j.nanoen.2011.10.002 ↗
5. Self-assembled nanostructured composites for solar absorber10.1016/j.matlet.2012.11.070 ↗
6. Efficient photon capturing with ordered three-dimensional nanowell arrays10.1021/nl3014567 ↗
7. High performance single layer nano-porous antireflection coatings on glass by sol–gel process for solar energy applications10.1016/j.solmat.2015.03.023 ↗
8. Thermal emission and design in 2D-periodic metallic photonic crystal slabs10.1364/OE.14.008785 ↗
9. Thermal radiation from photonic crystals: a direct calculation10.1103/PhysRevLett.93.213905 ↗
10. Advanced microhole arrays for light trapping in thin film silicon solar cells10.1016/j.solmat.2013.11.024 ↗
11. Kennedy · 2002
12. Porous carbon–titania nanocomposite films for spectrally solar selective absorbers10.1016/j.solmat.2014.10.032 ↗
13. Tandem structured spectrally selective coating layer of copper oxide nanowires combined with cobalt oxide nanoparticles10.1016/j.nanoen.2014.10.018 ↗
14. Effects of antireflection layers on the optical and thermal stability properties of a spectrally selective CrAlN–CrAlON based tandem absorber10.1016/j.solmat.2015.02.010 ↗
15. The spectral properties and thermal stability of CrAlO-based solar selective absorbing nanocomposite coating10.1016/j.solmat.2013.12.010 ↗
16. Nanometer thick tunable AlHfN coating for solar thermal applications: transition from absorber to antireflection coating10.1016/j.solmat.2015.02.008 ↗
17. Solar selective black nickel–cobalt coatings on aluminum alloys10.1016/j.solmat.2006.12.001 ↗
18. Potential applications of hierarchical branching nanowires in solar energy conversion10.1039/b912095e ↗
19. Metallic nanostructures for light trapping in energy-harvesting devices10.1038/lsa.2014.42 ↗
20. Solar selective absorbers based on two-dimensional W surface gratings with submicron periods for high-temperature photothermal conversion10.1016/S0927-0248(02)00364-1 ↗
21. Periodical surface structuring of metals by laser interference metallurgy as a new fabrication method of textured solar selective absorbers10.1002/adem.200500261 ↗
22. Electrochemical deposition of black nickel solar absorber coatings on stainless steel AISI316L for thermal solar cells10.1016/j.solmat.2004.07.045 ↗
23. Low-cost black Cu–Ni alloy coatings for solar selective applications10.1016/j.solmat.2006.12.004 ↗
24. Design and fabrication of spectrally selective TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber for high-temperature solar thermal power applications10.1016/j.solmat.2015.04.018 ↗
25. A new solar spectral selective absorbing coating of SS–(Fe3O4)/Mo/TiZrN/TiZrON/SiON for high temperature application10.1016/j.solmat.2014.04.014 ↗
26. Thermal aging characteristics of CrNxOy solar selective absorber coating for flat plate solar thermal collector applications10.1016/j.solmat.2013.03.005 ↗
27. New materials in hydrothermal synthesis10.1021/ar0000105 ↗
28. De-alloying of type 316 stainless steel in hot, concentrated sodium hydroxide solution10.1016/j.corsci.2004.01.011 ↗
29. Fe3O4 magnetic nanoparticles synthesis from tailings by ultrasonic chemical co-precipitation10.1016/j.matlet.2011.03.065 ↗
30. Solar selective absorbers based on Al2O3:W cermets and AlSiN/AlSiON layers10.1016/j.solmat.2015.01.029 ↗
31. Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials10.1016/j.apsusc.2007.09.063 ↗
32. Unexpected behavior of copper in modified ferrites during high temperature WGS reaction aspects of Fe3+↔Fe2+ redox chemistry from Mo¨ssbauer and XPS studies10.1021/jp301090d ↗
33. XPS and SEM studies of chromium oxide films chemically formed on stainless steel 316 L10.1016/S0254-0584(00)00249-2 ↗
34. XAFS and XPS studies on the enhancement of methane adsorption by NiO dispersed ACF with the relevance to structural change of NiO10.1016/S0009-2614(02)00154-9 ↗
35. Chemical bath deposition and electrochromic properties of NiOx films10.1016/S0927-0248(01)00061-7 ↗
36. XPS and SEM characterization of wheel/workpiece interface in grinding of superalloy10.1002/sia.1225 ↗
37. A. Ambrosini, T.N. Lambert, M. Bencomo, A. Hall, N.P. Siegel, C.K. Ho, Improved high temperature solar absorbers for use in concentrating solar power central receiver applications, in: Proceedings of the 5th International Conference on Energy Sustainability ASME 2011, American Society of Mechanical Engineers, 2011, pp. 587–594.10.1115/ES2011-54241 ↗
38. Spectrally selective CrMoN/CrON tandem absorber for mid-temperature solar thermal applications10.1016/j.solmat.2012.10.003 ↗
39. Solution-chemical derived nickel–alumina coatings for thermal solar absorbers10.1016/S0038-092X(03)00199-3 ↗
40. Thermal aging test of AlCrNO-based solar selective absorbing coatings prepared by cathodic arc plating10.1016/j.solmat.2015.01.015 ↗
41. High performance sputtered Ni: SiO2 composite solar absorber surfaces
42. Suitability of ultra-refractory diboride ceramics as absorbers for solar energy applications10.1016/j.solmat.2012.10.004 ↗