journal article·2011-10

Over 30% transparency large area inverted organic solar array by spray

Jason E. Lewis, Evan Lafalce, Patrick Toglia, Xiaomei Jiang

Publisher page

Abstract

We report the fabrication and characterization of large scale inverted organic solar array fabricated by all-spray process. The inverted polymer solar cell geometry consists of four layers, in the order of ITO–Cs2CO3–(P3HT:PCBM)–modified PEDPT:PSS, on a glass substrate. With semitransparent PEDPT:PSS as anode, the encapsulated solar array shows more than 30% transmission in the visible–near IR range. Optimization of device is done by thermal annealing, and the optimal annealing conditions are shown to be different in single-cell test device and the multiple-cell array. Solar illumination has been demonstrated to improve solar array efficiency up to 250%. Device efficiency of 1.80% was observed with the array under AM1.5 irradiance. Our preliminary data have shown that the performance enhancement under illumination only happens with sprayed devices, not devices made by spin coating. This means that solar cells made with our spray-on technique performs better under sunlight, which is beneficial for solar energy application. Published by Elsevier B.V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Photoinduced electron transfer from a conducting polymer to buckminsterfullerene10.1126/science.258.5087.1474 ↗
2. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunction10.1126/science.270.5243.1789 ↗
3. Morphology of composites of semiconducting polymers mixed with C6010.1016/S0379-6779(97)80058-6 ↗
4. 2.5% efficient organic plastic solar cells10.1063/1.1345834 ↗
5. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
6. Effect of LiF/metal electrodes on the performance of plastic solar cells10.1063/1.1446988 ↗
7. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
8. High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends10.1063/1.2006986 ↗
9. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
10. Using light-induced thermocleavage in a roll-to-roll process for polymer solar cells10.1021/am900858x ↗
11. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
12. Large area plastic solar cell modules10.1016/j.mseb.2006.06.008 ↗
13. Flexible polymer photovoltaic modules with incorporated organic bypass diodes to address module shading effects10.1016/j.solmat.2009.07.013 ↗
14. Reel to reel wet coating as an effieicnt up-scaling techniue for the production of bulk-heterojunction polymer solar cells10.1016/j.solmat.2008.12.013 ↗
15. Organic solar cell modules for specific applications—from energy autonomous systems to large area photovoltaics10.1016/j.tsf.2007.12.093 ↗
16. Large-area organic photovoltaic module—fabrication and performance10.1016/j.solmat.2008.11.018 ↗
17. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
18. Annealing-free high efficiency and large area polymer solar cells fabricated by a roller painting process10.1002/adfm.201000164 ↗
19. ITO-free wrap through organic solar cells—a module concept for cost-efficient reel-to-reel production10.1016/j.solmat.2006.10.005 ↗
20. ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
21. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps10.1016/j.orgel.2009.03.009 ↗
22. A Semi-transparent plastic solar cell fabricated by a lamination process10.1002/adma.200701101 ↗
23. Efficient inverted solar cells using TiO2 nanotube arrays10.1088/0957-4484/19/25/255202 ↗
24. Efficient inverted polymer solar cells10.1063/1.2212270 ↗
25. Metal grid/conducting polymer hybrid transparent electrode for inverted polymer solar cells10.1063/1.3394679 ↗
26. High efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
27. Inverted and transparent polymer solar cells prepared with vacuum-free processing10.1016/j.solmat.2008.11.002 ↗
28. Holger Christian Hesse and Lukas Schmidt–Mende, spray-deposited PEDOT:PSS for inverted organic solar cells10.1016/j.solmat.2010.08.018 ↗
29. Performance optimization of polymer solar cells using electrostatically sprayed photoactive layers10.1002/adfm.201000433 ↗
30. Substrate heated spray-deposition method for high efficient organic solar cell: morphology inspection10.1143/JJAP.49.018002 ↗
31. Spray-deposited poly(3.4-ethylenedioxythiophene):poly(styrenesulfonate) top electrode for organic solar cells10.1063/1.3021022 ↗
32. Fabrication of organic solar array for applications in microelectromechanical systems10.1063/1.2998825 ↗
33. Van Zant · 2000
34. A method of measuring the resistivity and Hall coefficient on lamellae of arbitrary shape
35. Morphology and charge transport in conjugated polymers10.1080/15321790500471194 ↗
36. Poly(3-hexylthiophene)/C60 heterojunction solar cells: implication of morphology on performance and ambipolar charge collection10.1016/j.solmat.2007.11.001 ↗
37. Shallow and deep traps in conjugated polymers of high intrachain order10.1103/PhysRevB.54.7610 ↗
38. Organic photovoltaic films10.1016/S1359-0286(02)00006-2 ↗
39. A new encapsulation solution for flexible organic solar cells10.1016/j.tsf.2005.12.091 ↗