journal article·2012-06

Blistering in ALD Al2O3 passivation layers as rear contacting for local Al BSF Si solar cells

B. Vermang, H. Goverde, A. Uruena, A. Lorenz, E. Cornagliotti, A. Rothschild, J. John, J. Poortmans, R. Mertens

Publisher page

Abstract

Random Al back surface field (BSF) p-type Si solar cells are presented, where a stack of Al2O3 and SiNx is used as rear surface passivation layer containing blisters. It is shown that no additional contact opening step is needed, since during co-firing local Al BSFs are induced at the location of these blisters. The best fill factors and short circuit currents are obtained in the case of (i) a hydrophobic pre-passivation cleaning, since it leads to a small density of larger blisters, and (ii) 10 nm of Al2O3, where the blistering size still increases during firing thanks to additional out-gassing. There is an apparent gain in J(SC) and V-OC of, respectively, 1.3 mA/cm(2) and 5 mV for the best random Al BSF cells compared to full Al BSF reference cells, because of better rear internal reflection and rear surface passivation. (C) 2012 Elsevier B.V. All rights reserved
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Integrated Circuits and Semiconductor Failure Analysis · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. S. O'Rourke, Deutsche Bank Estimates, vol. 212, (2009), pp. 250–8670.
2. Very low surface recombination velocities on p-type silicon wafers passivated with a dielectric with fixed negative charge10.1016/j.solmat.2006.04.014 ↗
3. Excellent passivation of highly doped p-type Si surfaces by the negative-charge-dielectric Al2O310.1063/1.2784168 ↗
4. Silicon surface passivation by atomic layer deposited Al2O310.1063/1.2963707 ↗
5. Negative charge and charging dynamics in Al2O3 films on Si characterized by second-harmonic generation10.1063/1.2985906 ↗
6. Role of field-effect on c-Si surface passivation by ultrathin (2–20▒nm) atomic layer deposited Al2O310.1063/1.3334729 ↗
7. A. Rothschild, B. Vermang, X. Loozen, B.J. O'Sullivan, J. John, J. Poortmans, ALD–Al2O3 passivation for solar cells: charge investigation, in: Proceedings of the 25th EU PVSEC and 5th WC PEC, 2010 pp. 1382–1385.
8. Electronic and chemical properties of the c-Si/Al2O3 interface10.1063/1.3587227 ↗
9. Impact of forming gas annealing and firing on the Al2O3/p-Si interface state spectrum10.1149/1.3597661 ↗
10. B. Vermang, H. Goverde, A. Lorenz, A. Uruena, G. Vereecke, J. Meersschaut, E. Cornagliotti, J. Das, A. Rothschild, J. John, J. Poortmans, R. Mertens, On the blistering of atomic layer deposited Al2O3 as Si surface passivation, in: Proceedings of the 37th IEEE PVSC, in press.
11. A. Richter, S. Henneck, J. Benick, M. Hörteis, M. Hermle, S.W. Glunz, Firing stable Al2O3/SiNx layer stack passivation for the front side boron emitter of n-type Si solar cells, in: Proceedings of the 25th EU PVSEC and 5th WC PEC, 2010, pp. 1453–1459.
12. D. Kania, P. Saint-Cast, M. Hofmann, J. Rentsch, R. Preu, High temperature stability of PECVD aluminium oxide layers applied as negatively charged passivation on c-Si surfaces, in: Proceedings of the 25th EU PVSEC and 5th WC PEC, 2010 pp. 2292–2296.
13. H.-P. Sperlich, D. Decker, P. Saint-Cast, E. Erben, L. Peters, High productive solar cell passivation on Roth&Rau MAiA® MW-PECVD inline machine—a comparison of Al2O3, SiO2 and SiNx–H process conditions and performance, in: Proceedings of the 25th EU PVSEC and 5th WC PEC, 2010, pp. 1352–1357.
14. T. Böscke, R. Hellriegel, T. Wütherich, L. Bornschein, A. Helbig, R. Carl, M. Dupke, D. Stichtenoth, T. Aichele, R. Jesswein, T. Roth, C. Schöllhorn, T. Geppert, A. Grohe, J. Lossen, H.-J. Krokoszinski, Fully screen-printed PERC cells with laser-fired contacts—an industrial cell concept with 19.5% efficiency, in: Proceedings of the 37th IEEE PVSC, in press.
15. G. Agostinelli, J. Szlufcick, P. Choulat, G. Beaucarne, Local contact structures for industrial PERC-type solar cells, in: Proceedings of the 20th EU PVSEC, 2005, pp. 942–945.
16. Laser-fired rear contacts for crystalline silicon solar cells10.1002/pip.422 ↗
17. B. Vermang, A. Rothschild, K. Kenis, K. Wostyn, T. Bearda, A. Racz, X. Loozen, J. John, P. Mertens, J. Poortmans, R. Mertens, Surface passivation for Si solar cells: a combination of advanced surface cleaning and thermal atomic layer deposition of Al2O3, in: Proceedings of the 25th EU PVSEC and 5th WC PEC, 2010, pp. 1118–1120.
18. Retrieved July 8th, 2011, from 〈http://camfr.sourceforge.net〉.
19. F. Huster, Investigation of the alloying process of screen printed aluminium pastes for the BSF formation on silicon solar cells, in: Proceedings of the 20th EU PVSEC, 2005, pp. 1466–1469.
20. M. Debucquoy, F. Dross, J. Poortmans, Optimization of the IV measurement of advanced structures, in: Proceedings of the 25th EU PVSEC and 5th WC PEC, 2010, pp. 381–384.
21. Spatially resolved series resistance of silicon solar cells obtained from luminescence imaging10.1063/1.2709630 ↗
22. Atomic layer deposition: an overview10.1021/cr900056b ↗