MoO3/CuI hybrid buffer layer for the optimization of organic solar cells based on a donor–acceptor triphenylamine
Source abstract
Abstract
We investigate the effect of anode buffer layers (ABLs) on the performances of multi-layer heterojunction solar cells with thienylenevinylene–triphenylamine with peripheral dicyanovinylene groups (TDCV–TPA) as donor material and fullerene C60 as acceptor. The deposition of a CuI layer between the ITO anode and the electron donor significantly improves the short-circuit current density (Jsc) and fill factor (FF) but reduces the open-circuit voltage (Voc). On the other hand, a MoO3 buffer layer increases the Voc but leads to limited Jsc and FF values, thus reducing power conversion efficiency (PCE). In this context, we show that the use of a hybrid anode buffer layer MoO3/CuI leads to a considerable improvement of the cells performances and a PCE of 2.50% has been achieved. These results are discussed on the basis of the dual function of MoO3 and CuI. While both of them reduce the hole injection barrier, CuI improves the conductivity of the organic film through an improvement of molecular order while MoO3 prevents leakage current through the diode. Finally the results of a cursory study of the ageing process provide further support to this interpretation of the effects of the various buffer layers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Organic photovoltaic cells: history, principle and techniques10.4067/S0717-97072008000300001 ↗
3. Roll-to-roll processed polymer tandem solar cells partially processed from water10.1016/j.solmat.2011.08.025 ↗
4. An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules10.1016/j.solmat.2011.01.010 ↗
5. Very-high-efficiency double-heterostructure copper phthalocyanine/C60 photovoltaic cells10.1063/1.1384001 ↗
6. Effect of blend layer morphology on performance of ZnPc:C60 based photovoltaic cells10.1063/1.3493177 ↗
7. Plastic photovoltaic cells encapsulation, effect on the open circuit voltage10.1016/j.dyepig.2007.11.005 ↗
8. Effects of the buffer layer inserted between the transparent conductive oxide anode and the organic electron donor10.1016/j.solmat.2009.11.003 ↗
9. Efficient photon harvesting at high optical intensities in ultrathin organic double-heterostrucutre photovoltaic diodes10.1063/1.126433 ↗
10. Small-molecule organic solar cells with improved stability10.1016/j.cplett.2005.09.052 ↗
11. Influence of the exciton blocking layer on the stability of layered organic solar cells10.1016/j.jpcs.2010.11.006 ↗
12. Degradation patterns in water and oxygen of an inverted polymer solar cell10.1021/ja106299g ↗
13. Improvement of organic solar cells performances using a zinc oxide anode coated by an ultra thin metallic layer10.1063/1.2888176 ↗
14. MoO3 surface passivation of the transparent anode in organic solar cells using ultra-thin films10.1063/1.3077160 ↗
15. Bithiophene imide and benzodithiophene copolymers for efficient inverted polymer solar cells10.1002/adma.201103948 ↗
16. X. Guo, N. Zhou, S.J. Lou, J.W. Hennek, R.P. Ortiz, M.R. Butler, P.T. Boudreault, J.W. Strzalka, P. Morin, M. Leclerc, J.T.L. Navarrete, M.A. Ratner, L.X. Chen, R.P.H. Chang, A. Facchetti, T.J. Marks, Bithiopheneimide-dithienosilole/dithienogermole copolymers for efficient solar cells: information from structure–property–device performance correlations and comparison to thieno[3,4-c] pyrrole-4,6 dione analogues, Journal of the American Chemical Society Article ASAP, 134 (2012) 18427–18439.
17. Kelvin probe study of band bending at organic semiconductor/metal interfaces: examination of Fermi level alignment10.1002/pssa.200404346 ↗
18. Energetics of metal–organic interfaces: new experiments and assessment of the field10.1016/j.mser.2008.12.001 ↗
19. Organic solar cells with remarkable enhanced efficiency by using a CuI buffer to control the molecular orientation and modify the anode10.1063/1.3483159 ↗
20. Structural templating as a route to improved photovoltaic performance in copper phthalocyanine/fullerene (C60) heterojunctions10.1063/1.2821229 ↗
21. Full characterization of the interface between the organic semiconductor copper phthalocyanine and gold10.1063/1.1459620 ↗
22. The impact of molecular orientation on the photovoltaic properties of a phthalocyanine/fullerene heterojunction10.1002/adfm.201200512 ↗
23. CuI interlayers in lead phthalocyanine thin films enhance near-infrared light absorption10.1063/1.4730604 ↗
24. Triphenylamine–thienylenevinylene hybrid systems with internal charge transfer as donor materials for heterojunction solar cells10.1021/ja058178e ↗
25. Influence of the highest occupied molecular orbital energy level of the donor material on the effectiveness of the anode buffer layer in organic solar cells10.1002/pssa.201127047 ↗
26. Influence of anode roughness and buffer layer nature on organic solar cells performance10.1016/j.tsf.2010.06.009 ↗
27. Study of the thin film interface aluminum–tellurium10.1002/pssa.2211240123 ↗
28. On the improvement of the efficiency of organic photovoltaic cells by the presence of an ultra-thin metal layer at the interface organic/ITO10.1051/epjap:2007145 ↗
29. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
30. P-type doping of organic wide band gap materials by transition metal oxides: a case-study on molybdenum trioxide10.1016/j.orgel.2009.05.007 ↗
31. A facile route to polymer solar cells with optimum morphology readily applicable to roll-to-roll process without sacrificing high device performance10.1002/adma.201000250 ↗
32. A comparison of different spray chemical vapour deposition methods for the production of undoped ZnO films10.1016/j.tsf.2009.01.157 ↗
33. Kelvin probe and ultraviolet photoemission measurements of indium tin oxide work function: a comparison10.1016/S0379-6779(99)00354-9 ↗
34. A new encapsulation solution for flexible organic solar cells10.1016/j.tsf.2005.12.091 ↗
35. Temperature dependent characteristics of poly(3 hexylthiophene)–fullerene based heterojunction organic solar cells10.1063/1.1545162 ↗
36. I–V characteristics of dark and illuminated PPV–PCBM blends solar cells10.1016/j.synthmet.2004.09.037 ↗
37. Organic solar cells on indium tin oxide and aluminum doped zinc oxide anodes10.1063/1.2771050 ↗
38. Surface studies of crystalline and amorphous Zn–In–Sn–O transparent conducting oxides10.1016/j.tsf.2012.04.075 ↗
39. Tailoring the work function of indium tin oxide electrodes in electrophosphorescent organic light-emitting diodes10.1063/1.3095492 ↗
40. Contact resistance between pentacene and indium-tin oxide (ITO) electrode with surface treatment10.1016/j.orgel.2007.05.006 ↗
41. Transition metal oxides as the buffer layer for polymer photovoltaic cells10.1063/1.2174093 ↗
42. Inverted organic photovoltaic cells with high open-circuit voltage10.1016/j.orgel.2009.12.024 ↗
43. Energy level evolution of air and oxygen exposed molybdenum trioxide films10.1063/1.3454779 ↗
44. Work function recovery of air exposed molybdenum oxide thin films10.1063/1.4748978 ↗
45. The investigation of the stability and optimal encapsulation time for ITO/CuPc/C60/Al bilayer cells10.1016/j.solmat.2010.01.001 ↗
46. On the improvement of the open circuit voltage of plastic solar cells by the presence of a thin aluminum oxide layer at the interface organic/aluminum10.1002/pssa.200622215 ↗
47. Hamed · Physical Review B · 1993 · 47 · 1087310.1103/PhysRevB.47.10873 ↗