journal article·2012-03Open access

Purification of metallurgical silicon by horizontal zone melting

P.R. Mei, S.P. Moreira, E. Cardoso, A.D.S. Côrtes, F.C. Marques

Abstract

Abstract In this study, we aimed at systematically determining the potential of the zone melting (ZM) technique to remove impurities from Metallurgical Grade Silicon (MG- Si) in an Electron Beam Furnace (EBF), using a water-cooled copper crucible. Our focus was on obtaining solar grade silicon, with the purity between Electronic Grade Silicon (EG-Si) and MG-Si, at lower cost than the silicon obtained by the Siemens process. The MG- Si (99.855% purity in mass, or 1,450 ppm of impurities) was processed by 1 and 2 passes of ZM at speed of 1 mm/min and 10 mm/min. The ZM process reduced in 98% the total amount of impurities present in the MG-Si, increasing the purity from 99% to 99.999%, an intermediate stage to achieve the electronic grade (> 99.9999%). Boron remained near the same after the ZM due to its vapor pressure be lower than the pressure of the furnace chamber and due its distribution coefficient in silicon be near the unit. Carbon and oxygen in the MG-Si were reduced from 106 to 35 ppm and from 30 ppm to 5 ppm, respectively, after ZM, and these values are very close to the levels in the electronic grade silicon. The electrical resistivity showed to be dependent on the boron concentration, but not on the phosphorus or the total amount of impurities. All ingots processed by ZM exhibited p-type characteristics, and it means that boron was really the dominant dopant.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Top 10: The biggest suppliers in 2010
2. Technology Roadmap: Solar Photovoltaic Energy. International Energy Agency. OECD/IEA, 2010, pp. 48.
3. Historical overview of silicon crystal pulling development10.1016/S0921-5107(99)00427-4 ↗
4. Silicon for photovoltaic applications10.1016/j.mseb.2006.06.054 ↗
5. Review: Solar-Grade Silicon10.1007/BF01203469 ↗
6. National Solar Technology Roadmap: Wafer-silicon PV. NREL/MP-520–41733. June 2007, pp. 6.
7. Purification of metallurgical grade silicon by a solar process10.1016/j.solmat.2006.02.009 ↗
8. New processes for the production of solar-grade polycrystalline silicon—A review10.1016/j.solmat.2007.10.003 ↗
9. The purification of metallurgical grade silicon by electron beam melting10.1016/j.jmatprotec.2004.03.035 ↗
10. Metals Handbook, ASM, Surface Engineering 5 (1994) pp. 558–559.
11. Principles of Zone Melting
12. J. Hinrichs, M. Hamester and L. Rottmann, Analysis of Solar Cell Silicon using Glow Discharge Mass Spectrometry, Application Note 30164, 2009, Thermo Fisher Scientific, Bremen, Germany. pp. 4.
13. Glow Discharge Mass Spectrometry: Trace Element Determinations in Solid Samples10.1002/jms.1190300802 ↗
14. An Improved Model for Analyzing Hole Mobility and Resistivity in p-Type Silicon Doped with Boron, Gallium, and Indium10.1149/1.2127466 ↗
15. A.D.S. Côrtes, D.S. Silva, G.A. Viana, F.C. Marques and P.R. Mei. Effects of impurities concentration on the efficiency of solar cells manufactured with upgrade metallurgical silicon. Proceedings of 37th IEEE Photovoltaic Specialist Conference, June 19–24, 2011, Seattle, Washington. pp. 01–04.10.1109/PVSC.2011.6186380 ↗