journal article·2010-03

Selenization of co-sputtered CuInAl precursor films

Daniel Dwyer, Ingrid Repins, Haralabos Efstathiadis, Pradeep Haldar

Publisher page

Abstract

Abstract CuInAl precursor films with varying Al/(In+Al) ratios were co-sputtered onto Mo coated soda-lime glass substrates. Metal precursor films were then selenized under vacuum conditions using thermally evaporated elemental selenium. Both precursor films and selenized samples were characterized for composition, crystalline phases, morphology, and compositional depth uniformity. Selenized films show low Al incorporation and phase separation when selenized at both 500 and 525 °C. Films selenized with a Se deposition rate of 12 A/s showed poor adhesion compared with samples selenized at 4 A/s. The segregation of aluminum towards the back contact as well as oxygen incorporation appears to cause adhesive loss in extreme cases, and poor interface electrical characteristics in others. The maximum device efficiency measured was 5.2% under AM1.5 for a device with ∼2 at% aluminum.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Thin-film intermediate band chalcopyrite solar cells10.1016/j.tsf.2008.11.030 ↗
2. Electrical characterization of Cu(In,Ga)Se2 thin-film solar cells and the role of defects for the device performance10.1016/S0927-0248(00)00273-7 ↗
3. Efficiency limitations for wide-band-gap chalcopyrite solar cells10.1016/j.tsf.2004.11.018 ↗
4. Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation10.1016/S0927-0248(00)00266-X ↗
5. Influence of the Ga-content on the bulk defect densities of Cu(In,Ga)Se210.1016/S0040-6090(00)01710-7 ↗
6. Effect of Ga content on defect states in CuIn1−xGaxSe2 photovoltaic devices10.1063/1.1485301 ↗
7. Defects in copper indium aluminum diselenide films and their impact on photovoltaic device performance10.1557/PROC-763-B9.2 ↗
8. CuIn1−xAlxSe2 thin films and solar cells10.1063/1.1476966 ↗
9. High-efficiency solar cells based on Cu (InAl)Se2 thin films10.1063/1.1499990 ↗
10. Optimization of the structural properties of selenized metallic alloys
11. Deposition of single-phase Cu(In,Ga)Se2 thin films
12. Characterization of co-sputtered Cu–In alloy precursors for CuInSe2 thin films fabrication by close-space selenization10.1016/S0927-0248(98)00102-0 ↗
13. Sequential sputtering/selenization technique for growth of CuInSe2 thin films10.1143/JJAP.37.L1065 ↗
14. D. Dwyer, I. Repins, H. Efstathiadis, P. Haldar, Deposition of CuInAlSe2 films using co-sputtered precursors and selenization, in: Proceedings of the 34th Photovoltaic Conference, 2009, pp. 000247–000251.10.1109/PVSC.2009.5411687 ↗
15. Goldstein · 2003
16. Die Konstitution der Mischkristalle und die Raumfüllung der Atome10.1007/BF01349680 ↗
17. Present status and future prospects of CIGSS thin film solar cells10.1016/j.solmat.2006.02.018 ↗
18. Phase formation and control of morphology in sputtered Cu–In alloy layers10.1016/S0038-1098(03)00108-X ↗
19. SEM analysis and selenization of Cu–In alloy films produced by co-sputtering of metals10.1016/j.solmat.2008.01.007 ↗
20. Real-time studies of phase transformations in Cu–In–Se–S thin films – 3: selenization of Cu–In precursors10.1016/j.jcrysgro.2006.05.080 ↗
21. In situ investigation on selenization kinetics of Cu–In precursor using time-resolved, high temperature X-ray diffraction10.1016/j.jcrysgro.2006.05.066 ↗
22. Real-time investigations of selenization reactions in the system Cu–In–Al–Se10.1002/pssa.200669558 ↗
23. Cu(In,Ga)Se2 thin films and solar cells prepared by selenization of metallic precursors10.1116/1.580056 ↗
24. In situ investigation of the selenization kinetics of Cu–Ga precursors using time-resolved high-temperature X-ray diffraction10.1016/j.tsf.2006.12.173 ↗
25. Ultraviolet laser excited adsorbate–surface interactions: NH3, C2H4, and CH2I2 on Al and oxidized Al surfaces10.1116/1.584572 ↗
26. D. Fisher, I. Repins, J. Schaefer, M. Beck, W. Batchelor, M. Young, S. Asher, The effect of Mo morphology on the performance of Cu(In,Ga)Se2 Thin Films, NREL Document