journal article·2011-12

Patternable solution process for fabrication of flexible polymer solar cells using PDMS

Soo-Won Heo, Kwan-Wook Song, Min-Hee Choi, Tae-Hyun Sung, Doo-Kyung Moon

Publisher page

Abstract

Abstract PH 500, a highly conducting poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS), is a typical conducting polymer anode material used in organic electric devices. However, it has the disadvantages of low conductivity and poor surface roughness and requires a patterning method for the electrode through including the laser and plasma. In this paper, therefore, the conducting polymer ink for a transparent anode was formulated by adding dimethyl sulfoxide (DMSO) and BYK-333 as the surfactant to enhance the conductivity and surface roughness. The conducting polymer anode was patterned through the application of a new patterning method that used polydimethylsiloxane (PDMS) on a flexible substrate. In addition, a photoactive layer was formed by applying the new patterning method to the conventional brush painting method in which patterning had previously been impossible. The resulting material was compared with the device fabricated by the spin coating method. The fabricated flexible polymer solar cells (PSCs) exhibited short-circuit current density ( J sc ), open-circuit voltage ( V oc ), fill factor (FF) and power conversion efficiency (PCE) values of 4.2 mA/cm 2 , 0.878 V, 26.5% and 0.98%, respectively, which represented an efficiency improvement of 38% over those fabricated by the spin coating method. Meanwhile, the J sc value was increased when the series resistance ( R s ) decreased to 150 Ω cm 2 .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Organic photovoltaic cells based on solvent-annealed, textured titanyl phthalocyanine/C60 heterojunctions10.1002/adfm.200801723 ↗
2. Improved high temperature stability of organic solar cells using a phosphine oxide type cathode modification layer10.1016/j.solmat.2010.12.022 ↗
3. Regioregular copolymers of 3-alkoxythiophene and their photovoltaic application10.1021/ja061664x ↗
4. Low band-gap polymers based on quinoxaline derivatives and fused thiophene as donor materials for high efficiency bulk-heterojunction photovoltaic cells10.1039/b823536h ↗
5. Synthesis and characterization of 2.1.3-benzothiadiazole-thieno [3.2-b] thiophene-based charge transferred-type polymers for photovoltaic application10.1016/j.solmat.2009.07.006 ↗
6. Synthesis of random copolymers based on 3-hexylthiophene and quinoxaline derivative: Influence between the intramolecular charge transfer (ICT) effect and π-conjugation length for their photovoltaic properties10.1016/j.synthmet.2010.08.012 ↗
7. Random copolymers based on 3-hexylthiophene and benzothiadiazole with induced π-conjugation length and enhanced open-circuit voltage property for organic photovoltaics10.1002/pola.24280 ↗
8. Optical properties of In2O3-SnO2 films in the transparent and plasma reflection region10.1016/0040-6090(86)90017-9 ↗
9. Transparent conductors-A status review10.1016/0040-6090(83)90256-0 ↗
10. Physical properties of RF sputtered ITO thin films and annealing effect10.1088/0022-3727/39/1/027 ↗
11. High conductivity poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) film and its application in polymer optoelectronic devices10.1002/adfm.200400016 ↗
12. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
13. Large-scale pattern growth of graphene films for stretchable transparent electrodes10.1038/nature07719 ↗
14. Towards a transparent, highly conductive poly(3,4-ethylenedioxythiophene)10.1002/adfm.200305059 ↗
15. Efficient and flexible ITO-free organic solar cells using high conductive polymer anodes10.1002/adma.200800338 ↗
16. Plasma patterning of Poly(3,4- ethylenedioxythiophene): Poly(styrene sulfonate) anodes for efficient polymer solar cells10.1016/j.tsf.2008.09.096 ↗
17. Enhancement of electrical conductivity of poly(3.4-ethylenedioxythiophene)poly4-styrenesulfonate by a change of solvents10.1016/S0379-6779(01)00576-8 ↗
18. Fabrication and processing of polymer solar cells: A review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
19. Ultra fast and parsimonious materials screening for polymer solar cells using differentially pumped slot-die coating10.1021/am100505e ↗
20. Low band gap polymers for roll-to-roll coated polymer solar cells10.1021/ma1015903 ↗
21. ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules10.1016/j.orgel.2011.01.009 ↗
22. Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing10.1039/c0jm01178a ↗
23. Manufacture, integration and demonstration of polymer solar cells in a lamp for the "Lighting Africa" initiative10.1039/b918441d ↗
24. Efficient polymer solar cells fabricated by simple brush painting
25. Annealing-free fabrication of P3HT: PCBM solar cells via simple brush painting10.1016/j.solmat.2009.08.017 ↗
26. Patternable brush painting process for fabrication of flexible polymer solar cells10.1016/j.solmat.2011.09.012 ↗
27. A low-bandgap Poly(2.7-Carbazole) derivative for use in high performance solar cells10.1002/adma.200602496 ↗
28. Organic based flexible speaker through enhanced conductivity of PEDOT:PSS with various solvents10.1016/S0379-6779(02)01026-3 ↗
29. Bird · 1960
30. Forces exerted during the brushing of a paint10.1007/BF01973663 ↗
31. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗