Interface analysis and intrinsic thermal stability of MoOx based hole-selective contacts for silicon heterojunction solar cells
Source abstract
Abstract
Abstract A possible research path to increase the photo-generated current in silicon heterojunction (SHJ) solar cells is to replace doped layers on the front-side of the cell, which result in significant parasitic light absorption losses. MoOx is one candidate to replace the p-doped a-Si:H layer in such devices, although it is claimed to be relatively unstable to thermal treatments. We found that a MoOx film with a thickness of 6 nm is sufficient to achieve a JSC of 36 mA/cm2, which is 0.5 mA/cm2 on average higher than that of our classical SHJ reference cell. We also established a contact sintering condition for printed Ag at 160 °C after MoOx deposition, without degrading the cell performance. The champion MoOx-contacted cell yielded VOC of 724 mV and FF of 74.1%, resulting in an efficiency of 19.3%. From a detailed analysis of the interfaces of the hole contact, an interfacial a-SiOx of 1.6–2 nm was observed between a-Si:H and MoOx irrespective of the MoOx thickness (6–10 nm) before and after contact sinter annealing at 160 °C. We postulate that this a-SiOx layer acts as an interfacial dipole layer and also increases the contact resistivity at this contact. The intrinsic stability of the optimised MoOx-contacted cell is studied using a one-cell mini-module under standard damp-heat testing (85 °C/85% humidity/1000 h). More than 97 %rel of the original efficiency is maintained after 1010 h of testing, which is comparable to the behavior observed in a classical SHJ reference one-cell mini-module that was similarly tested.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Impact of carrier recombination on fill factor for large area heterojunction crystalline silicon solar cell with 25.1% efficiency10.1063/1.4937224 ↗
2. Current losses at the front of silicon heterojunction solar cells10.1109/JPHOTOV.2011.2174967 ↗
3. Street · 1991
4. Measuring carrier injection from amorphous silicon into crystalline silicon using photoluminescence10.1002/pip.3042 ↗
5. Passivating contacts for crystalline silicon solar cells: from concepts and materials to prospects10.1109/JPHOTOV.2018.2797106 ↗
6. Stable dopant-free asymmetric heterocontact silicon solar cells with efficiencies above 20%10.1021/acsenergylett.7b01279 ↗
7. Efficient silicon solar cells with dopant-free asymmetric heterocontacts10.1038/nenergy.2015.31 ↗
8. Passivating electron-selective contacts for silicon solar cells based on an a-Si:H/TiOx stack and a low work function metal10.1002/pip.3023 ↗
9. Evidence of TiOx reduction at the SiOx/TiOx interface of passivating electron-selective contacts
10. Contact resistivity reduction on lowly-doped n-type Si using a low work function metal and a thin TiOx interfacial layer for doping-free Si solar cells
11. High-performance TiO2-based electron-selective contacts for crystalline silicon solar cells10.1002/adma.201600926 ↗
12. Silicon heterojunction solar cells with electron selective TiOx contact10.1016/j.solmat.2016.01.020 ↗
13. ITO/MoOx/a-Si:H(i) hole-selective contacts for silicon heterojunction solar cells: degradation mechanisms and cell integration10.1109/JPHOTOV.2017.2756066 ↗
14. Low-temperature atomic layer deposition of MoOx for silicon heterojunction solar cells10.1002/pssr.201510117 ↗
15. Investigation of the thermal stability of MoOx as hole-selective contacts for Si solar cells10.1063/1.5041774 ↗
16. Hole-collection mechanism in passivating metal-oxide contacts on Si solar cells: insights from numerical simulations10.1109/JPHOTOV.2018.2796131 ↗
17. Molybdenum oxide MoOx : a versatile hole contact for silicon solar cells10.1063/1.4903467 ↗
18. Hole selective MoOx contact for silicon solar cells10.1021/nl404389u ↗
19. Transition metal oxides as hole-selective contacts in silicon heterojunctions solar cells10.1016/j.solmat.2015.08.028 ↗
20. 22.5% efficient silicon heterojunction solar cell with molybdenum oxide hole collector10.1063/1.4928747 ↗
21. Selectivity issues of MoOx based hole contacts
22. Toward annealing-stable molybdenum-oxide-based hole-selective contacts for silicon photovoltaics10.1002/solr.201700227 ↗
23. Electron beam evaporated molybdenum oxide as hole-selective contact in 6-inch c-Si heterojunction solar cells10.1063/1.5049264 ↗
24. Molybdenum oxide: a superior hole extraction layer for replacing p-type hydrogenated amorphous silicon with high efficiency heterojunction Si solar cells10.1016/j.materresbull.2018.10.018 ↗
25. Transition metal oxide work functions: the influence of cation oxidation state and oxygen vacancies10.1002/adfm.201200615 ↗
26. Thermally stable molybdenum oxide hole-selective contacts deposited using spatial atomic layer deposition, 2018 IEEE 7th world conf. Photovolt
27. Physical properties of evaporated molybdenum oxide films10.1016/0040-6090(96)08617-8 ↗
28. Bifunctional hybrid a-SiOx (Mo) layer for hole-selective and interface passivation of highly efficient MoOx/a-SiOx (Mo)/n-Si heterojunction photovoltaic device10.1021/acsami.8b07001 ↗
29. Postdeposition annealing influence on sputtered indium tin oxide film characteristics10.1143/JJAP.33.302 ↗
30. Damage at hydrogenated amorphous/crystalline silicon interfaces by indium tin oxide overlayer sputtering10.1063/1.4764529 ↗
31. Parasitic absorption reduction in metal oxide-based transparent electrodes: application in perovskite solar cells10.1021/acsami.6b04425 ↗
32. Hydrogen reduction of molybdenum oxide at room temperature10.1038/srep40761 ↗
33. Back-contacted silicon heterojunction solar cells: optical-loss analysis and mitigation10.1109/JPHOTOV.2015.2438641 ↗
34. Towards a high efficiency amorphous silicon solar cell using molybdenum oxide as a window layer instead of conventional p-type amorphous silicon carbide10.1063/1.3624591 ↗
35. Origin of hole selectivity and the role of defects in low-temperature solution-processed molybdenum oxide interfacial layer for organic solar cells10.1021/jp303679y ↗
36. A fill factor loss analysis method for silicon wafer solar cells10.1109/JPHOTOV.2013.2270348 ↗
37. Rapid and accurate determination of series resistance and fill factor losses in industrial silicon solar cells
38. Origin of passivation in hole-selective transition metal oxides for crystalline silicon heterojunction solar cells10.1557/jmr.2016.453 ↗
39. Transmission electron microscopy studies of transition metal oxides employed as carrier selective contacts in silicon solar cells
40. In situ transmission electron microscopy study of molybdenum oxide contacts for silicon solar cells
41. Wide optical-gap a-SiO:H films prepared by rf glow discharge10.1016/S0022-3093(96)00597-2 ↗
42. Optimization of the window layer in large area silicon heterojunction solar cells10.1039/C6RA26342A ↗
43. Effects of exposure and air annealing on MoOx thin films10.1117/1.JPE.2.021213 ↗
44. Sputter-deposited WOx and MoOx for hole selective contacts
45. Interaction at the silicon/transition metal oxide heterojunction interface and its effect on the photovoltaic performance10.1039/C5CP05309A ↗
46. MoOx and WOx based hole-selective contacts for wafer-based Si solar cells