Control of secondary phases and disorder degree in Cu2ZnSnS4 films by sulfurization at varied subatmospheric pressures
Source abstract
Abstract
Cu2ZnSnS4 (CZTS)thin films deposited using direct current magnetron sputtering and sulfurized at different argon atmosphere pressures of 950, 460 and 50 mbar are studied focusing on the control of disorder degree and secondary phases. The films are in detail characterized employing X-ray diffraction, scanning electron and conductive atomic force microscopies, energy dispersive X-ray, μ-Raman spectroscopies and mappings. Such a comprehensive approach shows how the pressure variation influences morphology, structural and electrical properties of the films in submicron scale. The films sulfurized at the lowest applied pressure of 50 mbar are found to be single-phase CZTS with low disordering degree. Nevertheless, in those sulfurized at 950 and 460 mbar, Cu2-xS and ZnS secondary phases with concomitant spatial inhomogeneities are detected. At the same time, sulfurization at higher pressures enlarges the grains, which however demonstrate wide size distribution. Formation of CZTS crystal structure and secondary phases as well as acceleration of grain growth depending on pressure are interpreted and discussed
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Solar cell efficiency tables (version 51)10.1002/pip.2978 ↗
2. Influence of the annealing atmosphere and precursor's thickness on the properties of CZTSSe based solar cells10.1016/j.solmat.2018.11.001 ↗
3. Raman characterization of Cu2ZnSnS4 nanocrystals: phonon confinement effect and formation of CuxS phases10.1039/C8RA05390A ↗
4. Influence of the Cu2ZnSnS4 nanoparticles size on solar cell performance10.1016/j.solmat.2018.09.028 ↗
5. Secondary phases in Cu2ZnSnS4 films obtained by spray pyrolysis at different substrate temperatures and Cu contents10.1016/j.matlet.2018.01.010 ↗
6. Optimization of ink-jet printed precursors for Cu2ZnSn(S,Se)4 solar cells10.1016/j.jallcom.2017.12.035 ↗
7. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
8. Over 9% efficient kesterite Cu2ZnSnS4 solar cell fabricated by using Zn1-xCdxS buffer layer10.1002/aenm.201600046 ↗
9. Cu2ZnSnS4 solar cells with over 10% power conversion efficiency enabled by heterojunction heat treatment10.1038/s41560-018-0206-0 ↗
10. Synthesis of Cu2ZnSnS4 (CZTS) absorber by rapid thermal processing (RTP) sulfurization of stacked metallic precursor films for solar cell applications10.1016/j.matlet.2013.12.047 ↗
11. Sulfurization time effects on the growth of Cu2ZnSnS4 thin films by solution method10.1007/s10854-013-1153-y ↗
12. Effects of sulphurization time on Cu2ZnSnS4 absorbers and thin films solar cells obtained from metallic precursors10.1016/j.solmat.2013.03.032 ↗
13. Effects of sulfurization temperature on CZTS thin film solar cell performances10.1016/j.solener.2013.09.020 ↗
14. Optimization of sulfurization time and temperature for fabrication of Cu2ZnSnS4 (CZTS) thin films10.1016/j.spmi.2018.12.012 ↗
15. Effects of sulfurization pressure on the conversion efficiency of cosputtered Cu2ZnSnS4 thin film solar cells10.1155/2015/750846 ↗
16. Influence of sulfurization pressure on Cu2ZnSnS4 thin films and solar cells prepared by sulfurization of metallic precursors10.1016/j.jpowsour.2014.09.088 ↗
17. CZTS layers formed under sulfur-limited conditions at above atmospheric pressure10.1016/j.mssp.2018.10.015 ↗
18. Sol–gel processed Cu2ZnSnS4 thin films for a photovoltaic absorber layer without sulfurization10.1007/s10971-012-2703-0 ↗
19. Off-stoichiometric CZTS: neutron scattering investigations on mechanochemically synthesized powders10.1016/j.jallcom.2016.07.298 ↗
20. Kesterite thin-film solar cells: advances in materials modelling of Cu2ZnSnS410.1002/aenm.201100630 ↗
21. Tailoring Mo(S,Se)2 structure for high efficient Cu2ZnSn(S,Se)4 solar cells10.1016/j.solmat.2017.10.011 ↗
22. Effects of the compositional ratio distribution with sulfurization temperatures in the absorber layer on the defect and surface electrical characteristics of Cu2ZnSnS4 solar cells10.1002/pip.2619 ↗
23. Photoluminescence and Raman study of Cu2ZnSn(SexS1−x)4 monograins for photovoltaic applications10.1016/j.tsf.2010.12.099 ↗
24. Vibrational properties of stannite and kesterite type compounds: Raman scattering analysis of Cu2(Fe,Zn)SnS410.1016/j.jallcom.2012.06.042 ↗
25. Optically induced structural transformation in disordered kesterite Cu2ZnSnS410.1134/S0021364013180136 ↗
26. Raman scattering and disorder effect in Cu2ZnSnS410.1002/pssr.201307073 ↗
27. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
28. Raman scattering crystalline assessment of polycrystalline Cu2ZnSnS4 thin films for sustainable photovoltaic technologies: phonon confinement model10.1016/j.actamat.2014.02.035 ↗
29. Towards the growth of Cu2ZnSn1−xGexS4 thin films by a single-stage process: effect of substrate temperature and composition10.1016/j.solmat.2015.03.004 ↗
30. Polarized Raman scattering study of kesterite type Cu2ZnSnS4 single crystals10.1038/srep19414 ↗
31. Determination of the structural and optical characteristics of Cu2ZnSnS4 semiconductor thin films10.1134/S1063782614100273 ↗
32. Thin films of Cu2ZnSnS4 for solar cells: optical and structural properties10.15407/fm20.02.186 ↗
33. Optical and morphological properties of tetragonal Cu2ZnSnS4 thin films grown from sulphide precursors at lower temperatures10.15407/spqeo17.03.284 ↗
34. Thickness-dependent structural parameters of kesterite Cu2ZnSnSe4 thin films for solar cell absorbers10.1016/j.matlet.2018.04.109 ↗
35. Raman mapping analysis for removal of surface secondary phases of CZTS films using chemical etching10.1063/1.4963134 ↗
36. Imaging and phase identification of Cu2ZnSnS4 thin films using confocal Raman spectroscopy10.1116/1.3625249 ↗
37. Precursors' order effect on the properties of sulfurized Cu2ZnSnS4 thin films10.1088/0268-1242/24/10/105013 ↗
38. Effect of defects and secondary phases in Cu2ZnSnS4 absorber material on the performance of Zn(O,S) buffered devices10.1016/j.tsf.2018.12.001 ↗
39. SnS thin films grown by sulfurization of evaporated Sn layers: effect of sulfurization temperature and pressure10.1016/j.tsf.2016.06.018 ↗
40. Raman study of flash-lamp annealed aqueous Cu2ZnSnS4 nanocrystals10.3762/bjnano.10.20 ↗
41. Raman spectroscopy of Cu-Sn-S ternary compound thin films prepared by the low-cost spray-pyrolysis technique10.1364/AO.55.00B158 ↗
42. RF electromagnetic field treatment of tetragonal kesterite CZTSSe light absorbers10.1186/s11671-017-2183-9 ↗
43. Calculation of defect concentrations and phase stability in Cu2ZnSnS4 and Cu2ZnSnSe4 from stoichiometry10.1109/JPHOTOV.2015.2430015 ↗
44. Phase stability and structural comparison of phases in the Cu-Zn-Sn-S system using solid-state NMR10.1016/j.solmat.2018.10.007 ↗
45. The diffusion of zinc in copper and silver10.1143/JJAP.18.1025 ↗
46. Structural, electronic and optical properties in earth-abundant photovoltaic absorber of Cu2ZnSnS4 and Cu2ZnSnSe4 from DFT calculations10.1016/S1452-3981(23)07770-2 ↗
47. The reaction of tungsten with sulphur vapour10.1016/0022-5088(73)90164-1 ↗
48. Nitrogen solubility in molten metal and silicate at high pressure and temperature10.1016/j.gca.2013.07.007 ↗
49. Hirschfelder · 1964
50. Influence of precursor sulfur content on film formation and compositional changes in Cu2ZnSnS4 films and solar cells10.1016/j.solmat.2011.10.019 ↗
51. Control of composition and grain growth in Cu2ZnSnS4 thin films from nanoparticle inks10.1016/j.tsf.2019.02.004 ↗
52. In-situ XRD investigation of re-crystallization and selenization of CZTS nanoparticles10.1016/j.jallcom.2016.05.313 ↗
53. Preparation of Cu2ZnSnS4 (CZTS) sputtering target and its application to the fabrication of CZTS thin-film solar cells10.1016/j.jallcom.2015.09.111 ↗
54. Structural and optical properties of Cu2ZnSn(S,Se)4 films obtained by magnetron sputtering of a Cu2ZnSn alloy target10.1134/S1063783417080261 ↗
55. Preparation of Cu2ZnSnS4 thin films by sulfurizing electroplated precursors10.1016/j.solmat.2008.11.045 ↗
56. Non-stoichiometry effect and disorder in Cu2ZnSnS4 thin films obtained by flash evaporation: Raman scattering investigation10.1016/j.actamat.2013.11.010 ↗
57. The vibrational properties study of kesterite Cu2ZnSnS4 single crystals by using polarization dependent Raman spectroscopy10.1016/j.optmat.2012.09.031 ↗
58. Characterization of vibrational and mechanical properties of quaternary compounds Cu2ZnSnS4 and Cu2ZnSnSe4 in kesterite and stannite structures10.1103/PhysRevB.84.205201 ↗
59. Calculation of the lattice dynamics and Raman spectra of copper zinc tin chalcogenides and comparison to experiments
60. The diffusion rates of some metals in copper, silver, and gold10.1039/tf9504600713 ↗
61. Formation mechanism of secondary phases in Cu2ZnSnS4 growth under different copper content10.1016/j.matlet.2016.09.090 ↗
62. Development of a selective chemical etch to improve the conversion efficiency of Zn-rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
63. Rabinovich · 1991
64. Detailed investigations on influence of precursor stacking and sulfurization for Cu2ZnSnS4 film formation10.1016/j.tsf.2018.01.038 ↗
65. A detrimental reaction at the molybdenum back contact in Cu2ZnSn(S,Se)4 thin-film solar cells10.1021/ja308862n ↗
66. How small amounts of Ge modify the formation pathways and crystallization of kesterites10.1039/C7EE02318A ↗
67. On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks10.1016/j.solmat.2013.01.015 ↗
68. Lithium-doping inverts the nanoscale electric field at the grain boundaries in Cu2ZnSn(S,Se)4 and increases photovoltaic efficiency10.1039/C5CP04707B ↗
69. Multiwavelength excitation Raman scattering analysis of bulk and two-dimensional MoS2: vibrational properties of atomically thin MoS2 layers10.1088/2053-1583/2/3/035006 ↗
70. Dual function of ultrathin Ti intermediate layers in CZTS solar cells: sulfur blocking and charge enhancement10.1016/j.solmat.2017.09.052 ↗
71. Effect of Cu/(Zn+Sn) ratio on the properties of co-evaporated Cu2ZnSnSe4 thin films10.1016/j.solmat.2009.09.005 ↗
72. Copper sulphide (CuxS) as an ammonia gas sensor working at room temperature10.1016/j.snb.2008.02.015 ↗
73. Optimization of physical properties of spray-deposited Cu2ZnSnS4 thin films for solar cell applications10.1016/j.matdes.2016.10.068 ↗
74. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy10.1002/adma.201103470 ↗
75. Thermodynamic aspects of the synthesis of thin-film materials for solar cells, chem