journal article·2019-05Open access

Accelerated aging of absorber coatings for CSP receivers under real high solar flux – Evolution of their optical properties

Reine Reoyo-Prats, Alex Carling Plaza, Olivier Faugeroux, Bernard Claudet, Audrey Soum-Glaude, Christina Hildebrandt, Yaniv Binyamin, Alina Agüero, Tobias Meißner

Abstract

Abstract The use of durable high solar absorptance receivers is a key element in a CSP plant project. In this article, different receiver materials are studied: four alloy substrates (T91, T22, VM12, Inconel 617) combined with four new absorber coatings, operable in solar towers with molten salts or steam as heat transfer fluids, and a classic Pyromark® paint considered as a reference. In order to test the durability of the coatings, 200 solar accelerated aging cycles were applied on the samples, using a concentrated solar facility (named SAAF). The cycles were defined so as to apply realistic high solar flux and temperature on the front side of the samples, and with high cooling and heating rates reproducing the fast variation of solar irradiation due to cloudy weather and subsequent thermal shocks. The optical characteristics of the coatings were measured at the beginning and at regular intervals during the aging procedure. Different behaviors of the coatings were observed depending on the substrate, before any aging cycle. After this first aging campaign, some evolutions were observed on the solar absorptance or thermal emittance, depending on the substrate and the coating. Nevertheless, the degradations noticed are not significant enough to conclude about the durability of the coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Photovoltaic System Optimization Techniques · Solar Energy Systems and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Innovation in concentrated solar power10.1016/j.solmat.2011.05.020 ↗
2. A review of studies on central receiver solar thermal power plants10.1016/j.rser.2013.02.017 ↗
3. Prospects and problems of concentrating solar power technologies for power generation in the desert regions10.1016/j.rser.2015.09.015 ↗
4. Evaluation of glare at the ivanpah solar electric generating system10.1016/j.egypro.2015.03.150 ↗
5. Raising the Lifetime of Functional Materials for Concentrated Solar Power Technology, 2016. 〈www.raiselife.eu〉.
6. Review of high-temperature central receiver designs for concentrating solar power10.1016/j.rser.2013.08.099 ↗
7. Durability of solar absorber coatings and their cost-effectiveness10.1016/j.solmat.2017.03.010 ↗
8. Aging of solar absorber materials under highly concentrated solar fluxes10.1016/j.solmat.2014.01.010 ↗
9. C.K. Ho, A.R. Mahoney, A. Ambrosini, M. Bencomo, A. Hall, T.N. Lambert, Characterization of Pyromark 2500 for high-temperature solar receivers. In: Proceedings of the ASME 2012 6th International Conference Energy Sustain., San Diego, CA, USA, 2012, pp. 1–10.10.1115/ES2012-91374 ↗
10. Thermal model and thermodynamic performance of molten salt cavity receiver10.1016/j.renene.2009.11.017 ↗
11. Effect of the optical properties of the coating of a concentrated solar power central receiver on its thermal efficiency10.1016/j.solmat.2016.08.031 ↗
12. Solar energy materials and solar cells design of high-temperature solar-selective coatings for application in solar collectors10.1016/j.solmat.2017.05.056 ↗
13. A numerical thermal approach to study the accelerated aging of a solar absorber material10.1016/j.solener.2012.08.007 ↗
14. Solar energy materials and solar cells IMPACT: a novel device for in-situ thermo-mechanical investigation of materials under concentrated sunlight10.1016/j.solmat.2017.07.002 ↗
15. Sandia National Laboratories, Final Report On The Power Production Phase of The 10 MWe Solar Thermal Central Receiver Pilot Plant, 1988.