journal article·2018-03

α-SnSe thin film solar cells produced by selenization of magnetron sputtered tin precursors

Vasudeva Reddy Minnam Reddy, Greta Lindwall, Babu Pejjai, Sreedevi Gedi, Tulasi Ramakrishna Reddy Kotte, Mutsumi Sugiyama, Zi-Kui Liu, Chinho Park

Publisher page

Abstract

The temperature-pressure-composition phase diagrams of Sn-Se system were calculated using the CALPHAD (CALculation of PHase Diagram) models. The phase diagrams showed the formation of α-SnSe phase at selenium-rich side with pressures lower than atmospheric pressure and in the temperature range of 300–500 °C. As a first step, the effect of Sn/Se ratio on the phase formation was studied experimentally by selenization of tin metal precursor films using effusion cell evaporation. The Sn/Se ratio was varied by changing the selenium weight in the range of 0.5–1.5 g. The physical properties of the films were studied with suitable characterization techniques and the obtained results showed the formation of single phase α-SnSe at 1.0 g of selenium. Further, α-SnSe/CdS interface was studied by photoelectron yield spectroscopy (PYS), which showed a ‘type-I’ band alignment with a valence-band offset (∆E v) of 1.3 eV and a conduction-band offset (∆E c) of 0.2 eV. Finally, α-SnSe solar cells with a device structure of soda-lime glass (SLG)/Mo/α-SnSe/CdS/i-ZnO/Al:ZnO/Ni/Ag were fabricated and a power conversation efficiency of 1.42% was achieved at 1.0 g of selenium.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Chemically deposited SnSe thin films: thermal stability and solar cell application10.1149/2.0131408jss ↗
2. Perspectives on SnSe-based thin film solar cells: a comprehensive review10.1007/s10854-016-4563-9 ↗
3. Tabulated values of the Shockley-Queisser limit for single junction solar cells10.1016/j.solener.2016.02.015 ↗
4. Detailed balance limit for solar cell efficiency10.1016/j.mseb.2008.06.033 ↗
5. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
6. The Se-Sn (Selenium-Tin) system10.1007/BF02874984 ↗
7. Phase diagram investigation and proposition of a thermodynamic evaluation of the Tin-Selenium system10.1007/BF02648368 ↗
8. Phase equilibrium in binary systems AIVBVI Part.III Sytems Sn- Chalchogenides
9. Characterization of SnSe-CdO:Sn P-N junction for solar cell applications
10. Electrodeposited tin selenide thin films for photovoltaic applications10.1016/j.solener.2011.06.012 ↗
11. Theoretical analysis of the effect of conduction band offset of window/CIS layers on performance of CIS solar cells using device simulation10.1016/S0927-0248(00)00266-X ↗
12. Synthesis, deposition and characterization of tin selenide thin films by thermal evaporation technique10.1016/j.cap.2010.05.002 ↗
13. Semiconducting tin selenide thin films prepared by heating Se–Sn layers10.1088/0268-1242/19/12/003 ↗
14. Thermodynamic pathway for the formation of SnSe and SnSe2 polycrystalline thin films by selenization of metal precursors10.1039/c3ce41537f ↗
15. Characteristics of SnSe and SnSe2 thin films grown onto polycrystalline SnO2-coated glass substrates10.1002/pssa.201026584 ↗
16. ALD synthesis of SnSe layers and nanostructures10.1088/0022-3727/42/12/125306 ↗
17. Spray pyrolysis deposited tin selenide thin films for thermoelectric applications10.1016/j.matchemphys.2015.01.008 ↗
18. Brush plating of tin(II) selenide thin films10.1016/S0022-0248(01)01697-9 ↗
19. A brief history of CALPHAD10.1016/j.calphad.2007.10.001 ↗
20. First-principles calculations and CALPHAD modeling of thermodynamics10.1007/s11669-009-9570-6 ↗
21. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
22. Infrared and Raman spectra of the IV–VI compounds SnS and SnSe10.1103/PhysRevB.15.2177 ↗
23. Electrodeposited tin selenide thin films for photovoltaic applications10.1016/j.solener.2011.06.012 ↗
24. Raman spectra of SnS2 and SnSe210.1016/0038-1098(76)91297-7 ↗
25. Deposition and characterization of SnSe and CuInSe2 thin films by thermal evaporation technique from synthesized SnSe and CuInSe2 sources
26. Band alignment at the Cu2SnS3/In2S3 interface measured by X-ray photoemission spectroscopy10.1016/j.apsusc.2015.06.101 ↗
27. Photovoltaic properties of nanocrystalline SnSe – CdS10.1016/j.matlet.2013.10.073 ↗
28. Preparation of single-phase SnSe thin-films and modification of electrical properties via stoichiometry control for photovoltaic application10.1016/j.jallcom.2017.06.094 ↗