Composite “LiCl/MWCNT” as advanced water sorbent for thermal energy storage: Sorption dynamics
Source abstract
Abstract
Abstract Sorption heat storage (SHS) is a promising technology towards efficient use of renewable energy sources. Composite materials based on hygroscopic salts have a high potential for SHS in term of the heat storage capacity. Recently, a new sorbent “LiCl confined to Multi-Wall Carbon NanoTubes (MWCNT)” with enhanced storage capacity (1.7 kJ/g) has been suggested for SHS. This work addresses the dynamic study of water sorption on this material under operating conditions of a daily heat storage cycle. The study consists of three parts: (1) shaping the LiCl/MWCNT composite as grains (GP) and pellets with (PB) and without a binder (PP); (2) water sorption dynamics under conditions of the selected SHS cycle; (3) evaluation of the specific power achievable. Various configurations of the adsorbent bed were tested, namely, the loose grains GP placed on a metal support, and the pellets PB and PP glued to the support. The dynamic curves of water sorption obey an exponential equation. The PB configuration ensured a maximal specific power of 11.2 kW/kg (at 70% conversion) during the heat storage stage. During the heat release stage, the specific power is lower (5.4 kW/kg), probably due to a kinetic hindrance attributed to solid-solid transformation during the decomposition of LiCl·H2O complex towards the anhydrous salt. The high specific power along with the large heat storage capacity make the LiCl/MWCNT composite a promising new candidate for SHS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adsorption and Cooling Systems · Phase Change Materials Research · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Thermochemical energy storage and conversion: a-state-of-the-art review of the experimental research under practical conditions10.1016/j.rser.2012.04.007 ↗
2. Energy storage: applications and challenges10.1016/j.solmat.2013.08.015 ↗
3. Selection of materials for high temperature sensible energy storage10.1016/j.solmat.2013.03.009 ↗
4. Selection and characterization of recycled materials for sensible thermal energy storage10.1016/j.solmat.2012.07.032 ↗
5. Advancement in phase change materials for thermal energy storage applications10.1016/j.solmat.2017.07.023 ↗
6. Salt hydrates as latent heat storage materials: thermophysical properties and costs10.1016/j.solmat.2015.10.029 ↗
7. Enhancing the heat storage density of silica–alumina by addition of hygroscopic salts (CaCl2, Ba(OH)2, and LiNO3)10.1016/j.solmat.2015.04.032 ↗
8. Sorption thermal storage for solar energy10.1016/j.pecs.2013.05.004 ↗
9. Thermochemical energy storage at high temperature via redox cycles of Mn and Co oxides: pure oxides versus mixed ones10.1016/j.solmat.2013.12.018 ↗
10. Characterization of wastes based on inorganic double salt hydrates as potential thermal energy storage materials10.1016/j.solmat.2017.05.036 ↗
11. A review on the use of SrBr2·6H2O as a potential material for low temperature energy storage systems and building applications10.1016/j.solmat.2017.02.018 ↗
12. A review on long-term sorption solar energy storage10.1016/j.rser.2009.05.008 ↗
13. The latest advancements on thermochemical heat storage systems10.1016/j.rser.2014.08.054 ↗
14. Sorption thermal storage for solar energy10.1016/j.pecs.2013.05.004 ↗
15. Experimental testing of AQSOA FAM Z02/water adsorption system for heat and cold storage10.1016/j.applthermaleng.2017.06.085 ↗
16. Water loading lift and heat storage density prediction of adsorption heat storage systems using Dubinin-Polanyi theory—comparison with experimental results10.1016/j.apenergy.2017.07.008 ↗
17. Design and characterisation of a high powered energy dense zeolites thermal energy storage system for buildings10.1016/j.apenergy.2015.08.109 ↗
18. Studies of the water adsorption on zeolites and modified mesoporous materials for seasonal storage of solar heat10.1016/j.solener.2003.07.036 ↗
19. Water vapour adsorbent FAM-Z02 and its applicability to adsorption heat pump10.1252/kakoronbunshu.31.273 ↗
20. Effect of functional groups in MIL-101 on water sorption behavior10.1016/j.micromeso.2012.01.015 ↗
21. NH2-MIL-125 as a promising material for adsorptive heat transformation and storage10.1016/j.energy.2016.01.034 ↗
22. Water Adsorption Characteristics of MIL-101 for Heat-Transformation Applications of MOFs10.1002/ejic.201001156 ↗
23. "Chemical Heat Accumulators" – a new approach to accumulating low potential heat10.1016/0927-0248(96)00010-4 ↗
24. Effect of aluminum sulfate addition on the thermal storage performance of mesoporous SBA-15 and MCM-41 materials10.1016/j.solmat.2016.01.033 ↗
25. Composites “salt inside porous matrix” for adsorption heat transformation: a current state of the art and new trends10.1093/ijlct/cts050 ↗
26. New materials for adsorption heat transformation and storage10.1016/j.renene.2016.08.041 ↗
27. CaCl2-containing composites as thermochemical heat storage materials10.1016/j.solmat.2017.07.037 ↗
28. Further improvement of the synthesis of silica gel and CaCl2 composites: enhancement of energy storage density and stability over cycles for solar heat storage coupled with space heating applications10.1016/j.solener.2017.08.034 ↗
29. Composite sorbents “Li/Ca halogenides inside multi-wall carbon nano-tubes” for thermal energy storage10.1016/j.solmat.2016.06.006 ↗
30. Adsorbent working pairs for solar thermal energy storage in buildings10.1016/j.renene.2016.09.047 ↗
31. Dynamic optimization of adsorptive chillers: compact layer vs. bed of loose grains10.1016/j.applthermaleng.2017.06.141 ↗
32. Optimization of adsorption dynamics in adsorptive chillers: loose grains configuration10.1016/j.energy.2012.08.001 ↗
33. Dynamic optimization of adsorptive chillers: the “AQSOA™-FAM-Z02 – Water” working pair10.1016/j.energy.2016.03.036 ↗
34. NH2-MIL-125 as promising adsorbent for adsorptive cooling: water adsorption dynamics10.1016/j.applthermaleng.2017.01.080 ↗
35. A new methodology of studying the dynamics of water sorption/desorption under real operating conditions of adsorption heat pumps: experiment10.1016/j.ijheatmasstransfer.2007.10.042 ↗
36. Dynamic study of methanol adsorption on activated carbon ACM-35.4 for enhancing the specific cooling power of adsorptive chillers10.1016/j.apenergy.2013.11.073 ↗
37. Modeling of isobaric stages of adsorption cooling cycle: transient and quasi-stationary regimes10.1016/j.applthermaleng.2012.08.069 ↗
38. Modelling of isobaric stages of adsorption cooling cycle: an optimal shape of adsorption isobar10.1016/j.applthermaleng.2013.01.018 ↗
39. Novel adsorbent of methanol “LiCl inside silica pores” for adsorption cooling: dynamic optimization10.1016/j.energy.2010.11.016 ↗
40. Novel ammonia sorbents ‘‘porous matrix modified by active salt” for adsorptive heat transformation: 6. The ways of adsorption dynamics enhancement10.1016/j.applthermaleng.2012.01.004 ↗