Study of corrosion by Dynamic Gravimetric Analysis (DGA) methodology. Influence of chloride content in solar salt
Source abstract
Abstract
When a system for thermal energy storage (TES) is designed, many factors must be considered: storage time, dimensions, material to store heat, etc. Usually, molten salts are selected as TES materials because of their great thermal properties at high temperatures. When the whole TES system is going to be built, the material to be used for containing the thermal storage material becomes an important issue. It must have proper mechanical properties, withstand high temperatures and, above all, resist corrosion due to storage material, being in most of the cases, highly corrosive molten salt mixtures. To determine the corrosion on a metal plate, ASTM Standard-G1-03 procedure is usually applied, in which the corroded metal sample is submitted to several cycles including: attack by a chemical solution, washing, cleaning, drying, and weighing. In order to minimise the handling of the sample, a new methodology (Dynamic Gravimetric Analysis, DGA) has been developed and used to determine the corrosion produced in carbon steel A516Gr70 samples induced by different salt mixtures commonly used as molten salts containing different amounts of chloride, at working temperatures conditions. The results show that the higher is the content of chloride in molten salts the greater is the steel loss produced by corrosion and makes the corrosive kinetics to be highly increased when it is overtaken. (C) 2016 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Direct solar energy
2. A global review of energy consumption, CO2 emissions and policy in the residential sector (with an overview of the top ten CO2 emitting countries)10.1016/j.rser.2014.11.066 ↗
3. UNEP, Towards a green economy: pathways to sustainable development and poverty eradication, 2011.
4. Trends in the sources and sinks of carbon dioxide10.1038/ngeo689 ↗
5. Renewable energy and sustainable development: a crucial review10.1016/S1364-0321(99)00011-8 ↗
6. A worldwide perspective on energy, environment, and sustainable development10.1002/(SICI)1099-114X(199812)22:15<1305::AID-ER417>3.0.CO;2-H ↗
7. Heating and cooling energy trends and drivers in buildings10.1016/j.rser.2014.08.039 ↗
8. State of the art on high temperature thermal energy storage for power generation. Part 1-concepts, materials and modellization10.1016/j.rser.2009.07.035 ↗
9. Heat transfer fluids for concentrating solar power systems – a review10.1016/j.apenergy.2015.01.125 ↗
10. Development of molten salt heat transfer fluid with low melting point and high thermal stability10.1115/1.4004243 ↗
11. High-temperature molten salts for solar power application
12. Screening of high melting point phase change materials (PCM) in solar thermal concentrating technology based on CLFR10.1016/j.solener.2004.04.023 ↗
13. C.E. Bradshaw, R.W. Tyner, Chemical and engineering factors affecting solar central receiver applications of ternary molten salts – SAND88-8686, 1988.10.2172/1545833 ↗
14. S.D. Cramer, B.S. Covino, Eds., ‘Corrosion by Molten Nitrates, Nitrites, and Fluorides’, in ASM Handbook Volume 13A, Corrosion: Fundamentals, Testing, and Protection, ASM International, 2003, pp. 124–128.10.31399/asm.hb.v13a.a0003587 ↗
15. Corrosion of alloys and metals by molten nitrates
16. ASTM, ASTM G1 standard practice for preparing, cleaning, and evaluation corrosion test specimens, 2003.
17. Material aspects of solar salt for sensible heat storage10.1016/j.apenergy.2013.04.072 ↗
18. Corrosion of metals and salt hydrates used for thermochemical energy storage10.1016/j.renene.2014.09.059 ↗
19. R.W. Bradshaw, W.M. Clift, Effect of chloride content of molten nitrate salt on corrosion of a516 carbon steel – SAND2010-7594, Albuquerque, NM and Livermore, CA, USA, 2010.10.2172/1002088 ↗
20. R. Notoya, T. Ishikawa, T. Midorikawa, Corrosion behavior of iron and low carbon steels in molten alkali nitrates containing alkali halide, in: Proceedings of the Fifth International Congress on Metallic Corrosion, 1972, p. 1039.
21. Effects of halides on the corrosion of mild steel in molten NaNO3–KNO3 eutectic10.1179/000705976798319702 ↗
22. The effect of NaCl addition on the corrosion of mild steel in NaNO3 melt10.1016/0010-938X(93)90045-I ↗
23. S.H. Goods, R.W. Bradshaw, M.R. Prairie, J.M. Chavez, Corrosion of stainless and carbon steels in molten mixtures of industrial nitrates – SAND94-8211, Albuquerque, NM and Livermore, CA, USA, 1994.10.2172/10141843 ↗
24. Carbon steel passivity examined in alkaline solutions: the effect of chloride and nitrite ions10.1016/j.electacta.2008.01.091 ↗