Solar conversion efficiency and distribution of ZnS secondary phase in Cu2ZnSnS4 solar cells
Source abstract
Abstract
Abstract We found a clear correlation between the solar conversion efficiency and the distribution of the ZnS secondary phase in Cu 2 ZnSnS 4 (CZTS) solar cells. Five CZTS solar cells were prepared by the two-step process in which sputtered precursor multilayers were sulfurized at different temperatures. In higher efficiency solar cells, the ZnS secondary phase was found to accumulate near the interface between CZTS and MoS 2 formed on top of the Mo layer. It was also found that a solar cell with a higher efficiency showed weaker ZnS Raman signal in the MoS 2 layer. The highest conversion efficiency of 7.5% was obtained from a solar cell prepared at a sulfurization temperature of 570 °C, in which no ZnS was detected in the MoS 2 layer. We suggest that in order to obtain a high efficiency CZTS solar cell, it is critical to find a condition that keeps ZnS from the MoS 2 layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Electrical and optical properties of stannite-type quaternary semiconductor thin films10.1143/JJAP.27.2094 ↗
2. T.M. Friedlmeier, N. Wieser, T. Walter, H. Dittrich, H.-W. Schock, Heterojunctions based on Cu2ZnSnS4 and Cu2ZnSnSe4 thin films, in: Proceedings of the 14th European PVSEC, 1997, pp. 1242.
3. Solar cell efficiency tables (version 44)10.1002/pip.2525 ↗
4. W. Wischmann, R. Menner, E. Lotter, R. Würz, W. Witte, S. Paetel, et al., CIGS thin-film solar cells with an improved efficiency of 20.8%, in: Proceedings of the 29th European Photovoltic Solar Energy Conference Exhibition, 2014, pp. 1–22.
5. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
6. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
7. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
8. Defect formation and phase stability of Cu2ZnSnS4 photovoltaic material10.1103/PhysRevB.81.113202 ↗
9. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers10.1002/adma.201203146 ↗
10. P.J. Dale, K. Hoenes, J. Scragg, S. Siebentritt, A review of the challenges facing kesterite based thin film solar cells, in: Proceedings of the 34th IEEE Photovoltics Specialists Conference, 2009, pp. 002080–002085.10.1109/PVSC.2009.5411441 ↗
11. Raman effect in wurtzite- and zinc-blende-type ZnS single crystals10.1103/PhysRev.171.931 ↗
12. In-depth resolved Raman scattering analysis for the identification of secondary phases: characterization of Cu2ZnSnS4 layers for solar cell applications10.1063/1.3587614 ↗
13. Development of a selective chemical etch to improve the conversion efficiency of Zn-rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
14. On the formation mechanisms of Zn-rich Cu2ZnSnS4 films prepared by sulfurization of metallic stacks10.1016/j.solmat.2013.01.015 ↗
15. Influence of precursor sulfur content on film formation and the properties of sulfurized Cu2ZnSnS4 thin films for solar cells10.1002/pssa.201330425 ↗
16. Effects of Na and MoS2 on Cu2ZnSnS4 thin-film solar cell10.1002/pip.2500 ↗
17. Preparation of Cu2ZnSnS4 thin films by sulfurization of co-electroplated Cu–Zn–Sn precursors10.1002/pssc.200881182 ↗
18. Studies on Cu2ZnSnS4 (CZTS) absorber layer using different stacking orders in precursor thin films10.1016/j.solmat.2011.07.005 ↗
19. On the kinetics of MoSe2 interfacial layer formation in chalcogen-based thin film solar cells with a molybdenum back contact10.1063/1.4794422 ↗
20. Improving the conversion efficiency of Cu2ZnSnS4 solar cell by low pressure sulfurization10.1063/1.4870508 ↗
21. Study of optical and structural properties of Cu2ZnSnS4 thin films10.1016/j.tsf.2010.12.105 ↗
22. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering10.1016/j.jallcom.2011.04.097 ↗
23. Why are kesterite solar cells not 20% efficient?10.1016/j.tsf.2012.12.089 ↗
24. The vibrational properties study of kesterite Cu2ZnSnS4 single crystals by using polarization dependent Raman spectroscopy10.1016/j.optmat.2012.09.031 ↗
25. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
26. Anomalous excitonic resonance Raman effects in few-layered MoS210.1039/C4NR05785F ↗
27. First-order Raman effect in wurtzite-type crystals10.1103/PhysRev.181.1351 ↗
28. Vibrational properties and structure of undoped and Al-doped ZnO films deposited by RF magnetron sputtering10.1016/S0040-6090(00)01413-9 ↗
29. Thermally evaporated Cu2ZnSnS4 solar cells10.1063/1.3499284 ↗
30. Fabrication of Cu2ZnSnS4 solar cells by sulfurization of evaporated precursors10.1016/j.egypro.2011.10.175 ↗
31. Intrinsic point defects and complexes in the quaternary kesterite semiconductor Cu2ZnSnS410.1103/PhysRevB.81.245204 ↗
32. Zn(O,S) buffer layers and thickness variations of CdS buffer for Cu2ZnSnS4 solar cells10.1109/JPHOTOV.2013.2283058 ↗