Sand erosion on solar reflectors: Accelerated simulation and comparison with field data
Source abstract
Abstract
Abstract Solar reflectors for concentrating solar power applications can be subject to performance losses due to their permanent exposure to the environment. There is still lack of experience regarding the destructive effects of sand and dust storms on reflector materials and no accelerated ageing guideline is formulated yet to account for the performance loss of solar mirrors due to particle erosion to a realistic extent. The work described here shows one approach to design an accelerated ageing test setup that simulates erosion processes on solar reflectors based on DIN 52348 standard. Furthermore, the results of the developed laboratory ageing method were compared with the effects on exposed outdoor samples from Zagora (Morocco). Laboratory experiments demonstrated a linear correlation between the amount of sand, which is used to erode the reflector samples and their specular reflectance loss. As well, the dependence of the impact angle on the severeness of erosion was investigated. The results are in agreement with earlier works where it was determined that erosion damage on brittle materials like glass is most pronounced for perpendicular impact and becomes weaker for decreasing impact angles. Four different silvered-glass mirrors and three different aluminium mirrors were investigated. Using the results from the laboratory experiments it was possible to attribute defect rates to the respective reflector materials and rank them regarding the resistance towards erosion, specific for this setup. All tested silvered-glass mirrors showed higher erosion resistance than the aluminium samples. The conducted microscope comparison between outdoor exposed samples and those tested under laboratory conditions prove that the developed method for accelerated ageing tests provokes realistic erosion damage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photovoltaic System Optimization Techniques · Solar Thermal and Photovoltaic Systems · Photovoltaic Systems and Sustainability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. ISO 9227, Corrosion Tests in Artificial Atmospheres – Salt Spray Test, International Organization for Standardization, 2006.
2. ISO 11507, Paints and Varnishes – Exposure of Coatings to Artifical Weathering – Exposure to Fluorescent UV Lamps and Water, International Organization for Standardization, 2013.
3. ISO 61215, Crystalline Silicon Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval, International Electrotechnical Commission, 2005.
4. Bagnold · 1941
5. Goudie · 2006
6. Meteorological aspects associated with dust storms in the Sistan region, Southeastern Iran
7. S.A. Abdulla, H.M. Al-Rizzo, M.M. Cyril, Particle-size distribution of Iraqi sand and dust storms and their influence on microwave communication systems, in: Proceedings of the IEEE Transactions on Antennas and Propagation, vol. 36, 1988, pp. 114–126.10.1109/8.1082 ↗
8. A comprehensive review of the impact of dust on the use of solar energy: History, investigations, results, literature, and mitigation approaches10.1016/j.rser.2012.12.065 ↗
9. Collier · 1980
10. Cooper · 1985
11. Study of the surface damage of glass reflectors used in concentrated solar power plants10.1016/j.egypro.2015.03.013 ↗
12. Environmental effects on solar concentrator mirrors10.1016/0038-092X(81)90045-1 ↗
13. C. Sansom, P. Comley, P. King, H. Almond, C. Atkinson, E. Endaya, Predicting the Effects of Sand Erosion on Collector Surfaces in CSP Plants, SolarPACES, Beijing, September 2014.10.1016/j.egypro.2015.03.023 ↗
14. Andrews · 2001
15. MIL-STD-810G, Environmental Engineering Considerations and Laboratory Tests, DEFENSE, D.O., 2008.
16. ASTM D968-05, Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive, ASTM International, 2010.
17. ASTM F1864-05, Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings, ASTM International, 2010.
18. Durability of solar reflector materials for secondary concentrators used in CSP systems10.1016/j.solmat.2014.06.043 ↗
19. D. 52348, Prüfung von Glas und Kunststoff, in: Verschleißprüfung-Sandrieselverfahren, DIN, 1985.
20. C. Völker, D. Philipp, M. Masche, T. Kaltenbach, Development of a test method for the investigation of the abrasive effect of sand particles on components of solar energy systems, in: Proceedings of the European PV Solar Energy Conference 2014, Amsterdam, September 2014.
21. Towards the prediction of CSP mirrors wear: Methodology of analysis of influencing parameters on the mirrors surface degradation: Application in two different sites in Morocco10.1016/j.solener.2014.06.036 ↗
22. S. Caron, Accelerated Aging of Thick Glass Second Surface Silvered Reflectors Under Sandstorm Conditions, Master level thesis from European Solar Engineering School, No.146, 2011.
23. Laboratory simulation of the surface erosion of solar glass mirrors10.1016/j.solener.2015.05.044 ↗
24. Impact depth on glass surface caused by sand particles10.4028/www.scientific.net/AMM.146.197 ↗
25. Study of sand particle erosion of magnetron sputtered multilayer coatings10.1016/S0043-1648(99)00224-0 ↗
26. Investigation of abrasive action of atmospheric particles on the reflectance of mirrors
27. Effects of sandblasting on the efficiencies of solar panels10.1016/S0306-2619(99)00044-6 ↗
28. Dust storm simulation for accelerated life testing of solar collector mirrors10.1115/1.3266386 ↗
29. Modelling of optical durability of enhanced aluminum solar reflectors10.1016/j.solmat.2012.07.027 ↗
30. J.P. Thornton, The Effect of sandstorms on PV arrays and components, in: Proceedings of the National Solar Energy Conference, Cocao Beach, June, 1992.
31. A new relationship between grain size and fall (settling) velocity in air10.1177/0309133314562442 ↗
32. Near specular scatter analysis method with a new goniophotometer
33. Effect of impact angle on glass surfaces eroded by sand blasting10.1016/S0955-2219(99)00140-5 ↗
34. A. Faci, M. Kolli, N. Bouaouadja, B. Chabane, Study of the surface size defects in the case of a soda lime glass eroded by sandblasting, in: Proceedings of the MATEC Web of Conferences, vol. 5, 2013, p. 04038.10.1051/matecconf/20130504038 ↗
35. Repair and restoration of the Optical properties of sandblasted glasses by silica-based sol-gel coatings10.1111/ijag.12088 ↗
36. Analysis of the effects of outdoor and accelerated ageing on the optical properties of reflector materials for solar energy applications