Effective light trapping enhanced near-UV/blue light absorption in inverted polymer solar cells via sol–gel textured Al-doped ZnO buffer layer
Source abstract
Abstract
Abstract The effects of sol–gel textured Al-doped ZnO (AZO) cathode buffer layer on the performance of the inverted polymer solar cells have been investigated in this work. Textured AZO, together with a reflective back electrode provides efficient light-trapping, inducing further light absorption in the active layer. The AZO films were characterized with respect to their morphology, optical and electrical properties. Due to the enhanced absorption at near-UV/blue light region (300–500 nm), the short current density of the textured-AZO device is increased from 9.52 to 11.30 mA/cm2 compared with the reference cell based on the flat-AZO. Power conversion efficiency is increased substantially from 2.44% to 2.87% since without loss in the fill factor and open circuit voltage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
2. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
3. Simultaneous multilayer formation of the polymer solar cell stack using roll-to-roll double slot-die coating from water10.1016/j.solmat.2011.08.026 ↗
4. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
5. Thermal stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
6. Effects of postproduction treatment on plastic solar cells10.1002/adfm.200390011 ↗
7. Effect of annealing solvent solubility on the performance of poly(3-hexylthiophene)/methanofullerene solar cells10.1021/jp9029562 ↗
8. Nanomorphology of PCDTBT: PC70BM bulk heterojunction solar cells10.1002/aenm.201100667 ↗
9. Dual plasmonic nanostructures for high performance inverted organic solar cells10.1002/adma.201200120 ↗
10. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
11. Toward high-stability inverted polymer solar cells with an electrodeposited ZnO electron transporting layer10.1002/aenm.201100632 ↗
12. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
13. Spray-coated ZnO electron transport layer for air-stable inverted organic solar cells10.1016/j.solmat.2011.09.045 ↗
14. Electrical properties of inverted poly (3-hexylthiophene): methano-fullerene 6, 6-phenyl C-71-butyric acid methyl ester bulk hetero-junction solar cell with Cs2CO3 and MoO3 layers10.1016/j.solmat.2011.07.008 ↗
15. Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact10.1063/1.2402890 ↗
16. High-performance inverted polymer solar cells with solution-processed titanium chelate as electron-collecting layer on ITO electrode10.1002/adma.201104863 ↗
17. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
18. Effects of ZnO fabricating process on the performance of inverted organic solar cells10.1016/j.orgel.2012.03.021 ↗
19. An inverted organic solar cell employing a sol–gel derived ZnO electron selective layer and thermal evaporated MoO3 hole selective layer10.1063/1.3039076 ↗
20. Applications of ZnO in organic and hybrid solar cells10.1039/c1ee01873f ↗
21. Effects of the morphology of a ZnO buffer layer on the photovoltaic performance of inverted polymer solar cells10.1002/adfm.201101915 ↗
22. Comparison of various sol–gel derived metal oxide layers for inverted organic solar cells10.1016/j.solmat.2011.03.023 ↗
23. An efficient inverted organic solar cell with improved ZnO and gold contact layers10.1016/j.orgel.2012.02.012 ↗
24. Influence of ZnO interlayer on the performance of inverted organic photovoltaic device10.1016/j.solmat.2011.03.011 ↗
25. Influences of dopant concentration in sol–gel derived AZO layer on the performance of P3HT: PCBM based inverted solar cell10.1016/j.solmat.2012.12.033 ↗
26. Efficient photon harvesting at high optical intensities in ultrathin organic double-heterostructure photovoltaic diodes10.1063/1.126433 ↗
27. An effective light trapping configuration for thin-film solar cells10.1063/1.2789677 ↗
28. Surface relief gratings on poly (3-hexylthiophene) and fullerene blends for efficient organic solar cells10.1063/1.2802561 ↗
29. Surface-plasmon enhanced absorption in organic solar cells by employing periodically corrugated metallic electrode10.1063/1.4761947 ↗
30. Light trapping enhancement of inverted polymer solar cells with a nanostructured scattering rear electrode10.1016/j.orgel.2013.05.020 ↗
31. Effect of textured electrodes with light-trapping on performance of polymer solar cells10.1063/1.4720083 ↗
32. Effect of sol–gel derived ZnO annealing rate on light-trapping in inverted polymer solar cells10.1016/j.matlet.2013.06.063 ↗
33. ZnO thin films fabricated by chemical bath deposition, used as buffer layer in organic solar cells10.1016/j.apsusc.2009.02.054 ↗
34. Preparation and properties of transparent conductive aluminum-doped zinc oxide thin films by sol–gel process10.1116/1.1340659 ↗
35. Enhanced solar-cell efficiency in bulk-heterojunction polymer systems obtained by nanoimprinting with commercially available AAO membrane filters10.1002/smll.200900666 ↗
36. Efficiency improvement of blended poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)–propyl-1-phenyl-(6,6)C61 solar cells by nanoimprinting10.1063/1.3117226 ↗
37. Effective light trapping in thin film silicon solar cells from textured Al doped ZnO substrates with broad surface feature distributions10.1063/1.4731775 ↗
38. Beckmann · 1987 · 1
39. Modulated surface textures for enhanced light trapping in thin-film silicon solar cells10.1063/1.3488023 ↗
40. T. Nakada, Y. Ohkubo, A. Kunioka, Textured ZnO: Al films for solar cells by DC-magnetron sputtering in water vapor plasma, in: Proceedings of the Conference Record of the Twenty Second IEEE Photovoltaic Specialists Conference, 1991, pp. 1389–1392.10.1109/PVSC.1991.169435 ↗
41. Understanding light trapping by light scattering textured back electrodes in thin film n–i–p-type silicon solar cells10.1063/1.2751117 ↗
42. Highly efficient Si-nanorods/organic hybrid core-sheath heterojunction solar cells10.1063/1.3610461 ↗
43. Hybrid conjugated polymer/semiconductor photovoltaic cells10.1016/j.synthmet.2009.10.031 ↗
44. High performance ambient processed inverted polymer solar cells through interfacial modification with a fullerene self-assembled monolayer10.1063/1.3028094 ↗
45. Increasing the fill factor of inverted P3HT:PCBM solar cells through surface modification of Al-doped ZnO via phosphonic acid-anchored C60 SAMs10.1002/aenm.201100668 ↗