journal article·2012-08Open access

UV-nanoimprint lithography and large area roll-to-roll texturization with hyperbranched polymer nanocomposites for light-trapping applications

Marina A. González Lazo, Rémy Teuscher, Yves Leterrier, Jan-Anders E. Månson, Caroline Calderone, Aïcha Hessler-Wyser, Philippe Couty, Yvan Ziegler, Diego Fischer

Abstract

Light-trapping textures were produced in hyperbranched polymer (HBP) silica nanocomposites using a UV-nanoimprint lithography (UVNIL) replication method, either in batch or roll-to-roll processes. The hardness of the HBP was found to increase by a factor of 2.5 with the addition of 50 vol% of nanoparticles. A nickel master with random sub-micron pyramidal structures was used to imprint nanocomposites containing up to 20 vol% of silica on a polyethylene naphthalate (PEN) substrate. The influence of nanoparticle fraction and pressure on the texture morphology and light scattering properties of the replicas was studied using scanning electron microscopy and optical analysis. The roughness and coherence length of the textures were similar to those of the master for all investigated compositions and process pressures. Likewise, the light scattering performance of aluminum-coated texturized nanocomposites was identical to that of the metal template, with a haze of 90% over the 400-800 nm spectral range. Thin film amorphous silicon solar cells were deposited on the texturized substrates using a large-area roll-to-roll process. The photocurrent of these devices was found to be 23% higher than the reference value of a flat cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanofabrication and Lithography Techniques · Nonlinear Optical Materials Studies · Advancements in Photolithography Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Optically enhanced amorphous silicon solar cells10.1063/1.93817 ↗
2. Comparison and optimization of randomly textured surfaces in thin-film solar cells10.1364/OE.18.00A335 ↗
3. Understanding light trapping by light scattering textured back electrodes in thin film n-i-p-type silicon solar cells10.1063/1.2751117 ↗
4. Ray tracing analysis of the inverted pyramid texturing geometry for high efficiency silicon solar cells10.1016/0927-0248(93)90090-P ↗
5. Optical modeling of a-Si:H solar cells deposited on textured glass/SnO2 substrates10.1063/1.1487910 ↗
6. Light trapping in thin-film silicon solar cells by nano-textured interfaces10.1117/12.662842 ↗
7. Light trapping properties of pyramidally textured surfaces10.1063/1.339189 ↗
8. UV-nano-imprint lithography technique for the replication of back reflectors for n-i-p thin film silicon solar cells10.1002/pip.1003 ↗
9. Nanomoulding of transparent zinc oxide electrodes for efficient light trapping in solar cells10.1038/nphoton.2011.198 ↗
10. Opto-electronic properties of rough LP-CVD ZnO:B for use as TCO in thin-film silicon solar cells10.1016/j.tsf.2007.03.130 ↗
11. PEN as substrate for new solar cell technologies10.1016/j.solmat.2004.12.006 ↗
12. Sub-10nm imprint lithography and applications10.1116/1.589752 ↗
13. J. Escarre, J. Bertomeu, J.M. Asensi, J. Andreu, V. Terrazzoni-Daudrix, F.J. Haug, X. Niquille, Hot embossing of polymer substrates for thin silicon cell applications, in: Proceedings of the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, 2006, pp. 1556–1559.10.1109/WCPEC.2006.279781 ↗
14. Large scale ultraviolet-based nanoimprint lithography10.1116/1.1627816 ↗
15. High-speed roll-to-roll nanoimprint lithography on flexible plastic substrates10.1002/adma.200702650 ↗
16. Time-intensity transformation and internal stress in UV-curable hyperbranched acrylates10.1007/s00397-006-0163-6 ↗
17. Acrylated hyperbranched polymer photoresist for ultra-thick and low-stress high aspect ratio micropatterns10.1088/0960-1317/18/4/045022 ↗
18. Review article: polymer-matrix nanocomposites, processing, manufacturing, and application: an overview10.1177/0021998306067321 ↗
19. PEEK composites reinforced by nano-sized SiO2 and Al2O3 particulates10.1016/j.matchemphys.2004.10.009 ↗
20. Preparation and properties of poly(methylmethacrylate)-silica hybrid materials incorporating reactive silica nanoparticles10.1016/j.polymer.2006.04.002 ↗
21. Conversion and shrinkage analysis of acrylated hyperbranched polymer nanocomposites10.1002/app.30621 ↗
22. Mechanical integrity of transparent conductive oxide films for flexible polymer-based displays10.1016/j.tsf.2004.01.052 ↗
23. Mechanical failure analysis of thin film transistor devices on steel and polyimide substrates for flexible display applications10.1016/j.engfracmech.2009.12.016 ↗
24. Rheological behavior of concentrated hyperbranched polymer/silica nanocomposite suspensions10.1021/ma100569c ↗
25. Nanoimprint lithography with UV-curable hyperbranched polymer nanocomposites10.1002/masy.201051022 ↗
26. Assessing the effect of composite formulation on polymerization stress10.14219/jada.archive.2000.0207 ↗
27. Low-stress hyperbranched polymer/silica nanostructures produced by uv-curing, sol–gel processing and nanoimprint lithography10.1002/mame.201100108 ↗
28. P. Couty, M. Duchamp, K. Söderström, A. Kovács, R.E. Dunin-Borkowski, L. Sansonnens, Y. Ziegler, Transmission electron microscopy of amorphous tandem thin-film silicon modules produced by a roll-to-roll process on plastic foil, in: Proceedings of the 26th EU PVSEC, 5–9 September 2011, Hamburg, Germany, 2011.
29. Roll-to-roll manufacturing of amorphous silicon alloy solar cells with in situ cell performance diagnostics10.1016/S0927-0248(02)00454-3 ↗
30. Calleja · 2000
31. Characterisation of rough reflecting substrates incorporated into thin-film silicon solar cells10.1002/pip.681 ↗
32. A vision-based, 3D reconstruction technique for scanning electron microscopy: direct comparison with atomic force microscopy10.1002/jemt.20176 ↗
33. Characterisation of titanium dental implants I: critical assessment of surface roughness parameters10.2174/1876502501002010018 ↗
34. Kinetic Monte Carlo simulations of amorphous thin-film growth10.1002/pssb.200743257 ↗
35. WSXM: a software for scanning probe microscopy and a tool for nanotechnology10.1063/1.2432410 ↗
36. Microhardness of PEEK/ceramic micro- and nanocomposites: correlation with Halpin–Tsai model10.1016/j.msea.2008.01.091 ↗
37. Effect of ZnO nanoparticles on the thermal and mechanical properties of epoxy-based nanocomposite10.1007/s10973-010-0996-1 ↗
38. Internal stress dependence of the hardness of crystallized glasses10.1007/BF00610657 ↗
39. Ultra-microhardness testing procedure with Vickers indenter10.1016/S0257-8972(01)01413-X ↗
40. Hull · 1981
41. A variational approach to the theory of the elastic behaviour of polycrystals10.1016/0022-5096(62)90005-4 ↗
42. On the homogenized yield strength of two-phase composites10.1098/rspa.1992.0116 ↗
43. An homogenization procedure for the description of pre- and post-yielding stages of isotropic polymer composites10.1002/pc.20489 ↗
44. Composition dependence of tensile yield stress in filled polymers10.1007/BF01730605 ↗
45. Random close packing of disks and spheres in confined geometries10.1103/PhysRevE.80.051305 ↗
46. Efficient light management scheme for thin film silicon solar cells via transparent random nanostructures fabricated by nanoimprinting10.1063/1.3432739 ↗
47. Simulation and investigation of factors affecting high aspect ratio UV embossing10.1021/la035124e ↗
48. Optical properties of ultrathin aluminum films deposited by magnetron sputtering in visible band10.1016/j.optmat.2005.04.011 ↗