Degradation of electrical properties of PTB1:PCBM solar cells under different environments
Source abstract
Abstract
We investigate the degradation of bulk heterojunction solar cells based on the polymer poly((4,8-bis (octyloxy) benzo (1,2-b:4,5-b׳) dithiophene-2,6-diyl) (2-((dodecyloxy) carbonyl) thieno(3,4-b) thiophenediyl)) (PTB1) and the fullerene [6,6]-phenyl C 61-butyric acid methyl ester (PCBM) under different environments: dry nitrogen atmosphere (H 2O<0.1 ppm, O 2<0.1 ppm), air (60±5% relative humidity) and under encapsulation in accordance with established ISOS-D-1 protocols. The evolution of the electrical measurements under dark and illumination conditions is used to analyze the degradation process during 5300 h and its relationship with the physical mechanisms. The degradation in the efficiency of the solar cells is mainly due to a reduction of short circuit current density ( J SC) and fill factor (FF) while open circuit voltage ( V OC) is the most stable parameter in all studied conditions. The T S80 lifetimes for power conversion efficiency ( PCE) of samples exposed to nitrogen and air environments and under encapsulation were 990 h, 4 h and 48 h, respectively. The analysis of the PCE decay permits to identify and evaluate the intensity of different degradation mechanisms (intrinsic polymer chemical reactions or by diffused environmental oxygen or water) in the different conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Solar cell efficiency tables (version 42)10.1002/pip.2352 ↗
2. Organic solar cells: an overview10.1557/JMR.2004.0252 ↗
3. Correlation between P3HT inter-chain structure and Jsc of P3HT:PC[70]BM blends for solar cells10.1016/j.microrel.2012.11.006 ↗
4. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
5. Strategies for increasing the efficiency of heterojunction organic solar cells: material selection and device architecture10.1021/ar9000923 ↗
6. G. Chidichimo, L. Filippelli, Organic solar cells: problems and perspectives, Int. J. Photoenergy Article ID 123534 (2010) 1−11.10.1155/2010/123534 ↗
7. Bulk heterojunction solar cells based on a new low-band-gap polymer: morphology and performance10.1016/j.orgel.2011.04.001 ↗
8. Advanced materials and processes for polymer solar cell devices10.1039/B913168J ↗
9. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
10. Polymer solar cells: Recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
11. Degradation of organic solar cells due to air exposure10.1016/j.solmat.2006.06.041 ↗
12. A setup for studying stability and degradation of polymer solar cells10.1016/j.solmat.2008.02.008 ↗
13. Efficient and air-stable plastics-based polymer solar cells enabled by atomic layer deposition10.1039/c0jm04066e ↗
14. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
15. Polymers and solar cells therefrom with remarkable stability toward oxygen10.1021/ma801932a ↗
16. Significant improvement of polymer solar cell stability†10.1021/cm051320q ↗
17. Water-induced degradation of polymer solar cells studied by H218O labeling10.1021/am800039w ↗
18. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-Benzothiadiazole10.1021/ja806687u ↗
19. Development of new semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
20. Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties10.1021/ja901545q ↗
21. A new class of semiconducting polymers for bulk heterojunction solar cells with exceptionally high performance10.1021/ar1000296 ↗
22. Structure, dynamics, and power conversion efficiency correlations in a new low bandgap polymer: PCBM solar cell10.1021/jp909135k ↗
23. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
24. Effects of photo-oxidation on the performance of Poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylene vinylene]:[6,6]-Phenyl C61-Butyric acid methyl ester solar cells10.1002/adfm.200500714 ↗
25. Consensus stability testing protocols for organic photovoltaic materials and devices10.1016/j.solmat.2011.01.036 ↗
26. Stability of polymer solar cells10.1002/adma.201104187 ↗
27. The ISOS-3 inter-laboratory collaboration focused on the stability of a variety of organic photovoltaic devices10.1039/C1RA00686J ↗
28. The degradation of indium tin oxide/pentacene/fullerene/tris-8-hydroxy-quinolinato aluminum/aluminum heterojunction organic solar cells: By oxygen or moisture?10.1016/j.solmat.2010.01.006 ↗
29. Lifetimes of organic photovoltaics: photochemistry, atmosphere effects and barrier layers in ITO-MEHPPV:PCBM-aluminium devices10.1016/j.solmat.2004.09.002 ↗
30. Long-term operational lifetime and degradation analysis of P3HT:PCBM photovoltaic cells10.1016/j.solmat.2010.09.007 ↗
31. Water and oxygen induced degradation of small molecule organic solar cells10.1016/j.solmat.2011.01.001 ↗
32. Effects of solvent and annealing on the improved performance of solar cells based on poly(3-hexylthiophene): fullerene10.1063/1.1929875 ↗
33. Influence of oxygen on semi-transparent organic solar cells with gas permeable electrodes10.1016/j.orgel.2009.08.001 ↗
34. Degradation mechanisms in organic solar cells: localized moisture encroachment and cathode reaction10.1016/j.solmat.2012.04.038 ↗
35. Degradation effects related to the hole transport layer in organic solar cells10.1002/adfm.201100429 ↗
36. Influence of P3HT:PCBM blend preparation on the active layer morphology and cell degradation10.1016/j.microrel.2010.09.016 ↗
37. Degradation mechanisms in organic photovoltaic devices10.1016/j.orgel.2011.11.027 ↗
38. Delineation of the effects of water and oxygen on the degradation of organic photovoltaic devices10.1016/j.solmat.2012.06.028 ↗
39. Study of thin calcium electrode degradation by ion beam analysis10.1016/j.nimb.2006.06.014 ↗
40. Lifetimes of organic photovoltaics: combining chemical and physical characterisation techniques to study degradation mechanisms10.1016/j.solmat.2006.04.009 ↗
41. Pathways for the degradation of organic photovoltaic P3HT:PCBM based devices10.1016/j.solmat.2008.01.020 ↗
42. Correlating reduced fill factor in polymer solar cells to contact effects10.1063/1.2841062 ↗
43. S-shaped current-voltage characteristics of organic solar devices10.1103/PhysRevB.82.115306 ↗
44. Oxygen doping of P3HT:PCBM blends: Influence on trap states, charge carrier mobility and solar cell performance10.1016/j.orgel.2010.07.016 ↗
45. Synthesis of light-emitting conjugated polymers for applications in electroluminescent devices10.1021/cr000013v ↗