Highly reflective nanotextured sputtered silver back reflector for flexible high-efficiency n–i–p thin-film silicon solar cells
Source abstract
Abstract
High reflectivity is essential when a metal is used as back contact and reflector in thin-film silicon solar cells. We show that thermal annealing at 150 °C improves the reflectivity of silver films deposited by sputtering at room temperature on nanotextured substrates. The annealing provokes two interlinked effects: rearrangement of the silver layer with a modification of its morphology and an increase of up to 42% in the grain size of the polycrystalline film for the preferential orientation as measured by X-ray diffraction. The main consequence of these two mechanisms is a large increase in the reflectivity of silver when measured in air. This reflectivity increase is also noticeable in devices: amorphous silicon thin-film solar cells grown on annealed silver films yield higher internal and external quantum efficiencies compared to cells grown on as-deposited silver. The morphology modification smoothes down the substrate, which is revealed by a clear increase of the open-circuit voltage and fill factor of the cells grown on top. An amorphous silicon cell with a 200 nm nominally thick i-layer fabricated on a flexible plastic substrate yielded an initial efficiency close to 10% with 15.9 mA/cmof short-circuit current using highly reflective annealed textured silver. We also propose, for industrial purpose, the sputtering of thin silver layer (120 nm) under moderate substrate temperature (∼150 °C) to increase the layer reflectivity, which avoids lengthening of the back reflector fabrication.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Efficiency of the a-Si:H solar cell and grain size of SnO2 transparent conductive film10.1109/EDL.1983.25686 ↗
2. Study of back reflectors for amorphous silicon alloy solar cell application10.1063/1.347418 ↗
3. Texture etched ZnO:Al coated glass substrates for silicon based thin film solar cells10.1016/S0040-6090(99)00085-1 ↗
4. Impact of front and rear texture of thin-film microcrystalline silicon solar cells on their light trapping properties10.1063/1.3467968 ↗
5. Slow Bloch modes for enhancing the absorption of light in thin films for photovoltaic cells10.1063/1.2929747 ↗
6. High-efficiency photonic crystal solar cell architecture10.1364/OE.17.008871 ↗
7. J. Zhu, Z. Yu, G.-F. Burkhard, C.-M. Hsu, S.-T. Connor, Y. Xu, Q. Wang, M. McGehee, S. Fan, Y. Cui, Optical absorption enhancement in amorphous silicon nanowire and nanocone arrays, Nano Letters, 9 (209) 279-282.10.1021/nl802886y ↗
8. Photocurrent enhancement in thin film amorphous silicon solar cells with silver nanoparticles10.1002/pip.1015 ↗
9. Surface plasmons for enhanced silicon light-emitting diodes and solar cells10.1016/j.jlumin.2006.08.053 ↗
10. Understanding light trapping by light scattering textured back electrodes in thin film n–i–p type silicon solar cells10.1063/1.2751117 ↗
11. UV-nano-imprint lithography technique for the replication of back reflectors for n–i–p thin film silicon solar cells10.1002/pip.1003 ↗
12. High fidelity transfer of nanometric random textures by UV embossing for thin film solar cells applications10.1016/j.solmat.2010.11.010 ↗
13. Plasma losses by fast electrons in thin films10.1103/PhysRev.106.874 ↗
14. Optimal design of periodic surface texture for thin-film a-Si:H solar cells10.1002/pip.940 ↗
15. Double absorptions in aggregate-roughened silver surfaces10.1063/1.88631 ↗
16. Optics of rough surfaces, discontinuous films and heterogeneous materials10.1016/0039-6028(80)90291-5 ↗
17. Optical properties of silver films deposited at low temperature10.1063/1.331705 ↗
18. X-ray diffraction study of vacuum-evaporated silver films10.1116/1.1492444 ↗
19. Relation between optical scattering, microstructure, and topography of thin silver films. 2: Microstructure10.1364/AO.24.002712 ↗
20. Void growth in thin silver films10.1016/0040-6090(80)90294-1 ↗
21. In-situ TEM observations of abnormal grain groqth, coarsening, and substrate de-wetting in nanocrystalline Ag thin films10.1016/S0040-6090(99)00947-5 ↗
22. TEM annealing study of normal grain growth in silver thin films10.1016/S0040-6090(00)01570-4 ↗
23. Study on texture evolution and properties of silver thin films prepared by sputtering deposition10.1016/S0169-4332(03)00888-2 ↗
24. The microstructure of sputter-deposited coatings10.1116/1.573628 ↗
25. Low pressure chemical vapour deposition of ZnO layers for thin-film solar cells: temperature-induced morphological changes10.1016/j.solmat.2004.08.002 ↗
26. J. Bailat, D. Dominé, R. Schlüchter, J. Steinhauser, S. Faÿ, F. Freitas, C. Bücher, L. Feitknecht, X. Niquille, T. Tscharner, A. Shah, C. Ballif, High efficiency n–i–p microcrystalline and micromorph thin film solar cells deposited on LP-CVD ZnO coated glass substrates, in: Proceedings of the Fourth WCPEC Conference, 2006 pp.1533–1536.10.1109/WCPEC.2006.279775 ↗
27. The measurement of particle size by the X-ray method10.1098/rspa.1938.0079 ↗
28. Optimization of amorphous silicon thin film solar cells for flexible photovoltaics10.1063/1.2938839 ↗
29. R. Biron, C. Pahud, F.-J. Haug, J. Escarré, K. Söderström, C. Ballif, Window layer with p doped silicon oxide for high VOC thin-film silicon n–i–p solar cells, In preparation.
30. Unlinking absorption and haze in thin film silicon solar cells front electrodes10.1002/pssr.201004303 ↗
31. Optical properties of polycrystalline metallic films10.1103/PhysRevB.67.195106 ↗
32. Silicon dioxide as high temperature stabilizer for silver films10.1016/0040-6090(77)90221-8 ↗
33. Resistive interlayer for improved performance of thin film silicon solar cells on highly textured substrate10.1063/1.3324704 ↗