Model development and performance evaluation of thermoelectric and radiative cooling module to achieve all-day power generation
Source abstract
Abstract
Abstract To date, there still exist 1.3 billion people worldwide lacking reliable access to electricity. Radiative cooling driving thermoelectric generator can achieve all-day reliable power generation without any energy input. But the existing devices achieve extremely low power generation. In this work, a novel radiative cooling driving thermoelectric generator is developed and it can achieve significantly greater power generation, improving by 24% in inland areas and 71% in coastal areas (compared with the existing modules). Additionally, atmospheric humidity and solar absorption have the adverse impact on power generation, while ambient temperature is the opposite. And wind speed plays a leading role on the power generation of the module. As wind speed increases to 10 m/s, the power generation of the developed module is 5 times that of the existing modules. In the following operation modeling, the developed module achieves a maximum power generation of 0.92 W/m2, 84% higher than that of the existing report. Lastly, the power generation potential of the module is estimated and the Carnot-limited efficiency with radiative cooling can theoretically be improved from 15% to 23.1%. Our developed radiative cooling driving thermoelectric generator significantly improves the all-day power generation performance and has a great application potential in off-grid areas.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Psychological and Temporal Perspectives Research · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Productive uses of energy for rural development10.1146/annurev.energy.30.050504.144228 ↗
2. Photovoltaic materials: present efficiencies and future challenges10.1126/science.aad4424 ↗
3. Research opportunities to advance solar energy utilization10.1126/science.aad1920 ↗
4. Concentrating solar thermoelectric generators with a peak efficiency of 7.4%10.1038/nenergy.2016.153 ↗
5. High-performance flat-panel solar thermoelectric generators with high thermal concentration10.1038/nmat3013 ↗
6. Study of thermoelectric generation unit for radiant waste heat10.1016/j.matpr.2015.05.104 ↗
7. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
8. Performance and economic limits of passively cooled hybrid thermoelectric generator-concentrator photovoltaic modules10.1016/j.apenergy.2019.01.132 ↗
9. Feasibility and parametric evaluation of hybrid concentrated photovoltaic-thermoelectric system10.1016/j.apenergy.2016.11.064 ↗
10. Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling10.1126/science.aat9513 ↗
11. A radiative cooling structural material10.1126/science.aau9101 ↗
12. Radiative human body cooling by nanoporous polyethylene textile10.1126/science.aaf5471 ↗
13. Sub-ambient non-evaporative fluid cooling with the sky10.1038/nenergy.2017.143 ↗
14. Passive radiative cooling below ambient air temperature under direct sunlight10.1038/nature13883 ↗
15. Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling10.1126/science.aai7899 ↗
16. Daytime radiative cooling using near-black infrared emitters10.1021/acsphotonics.6b00991 ↗
17. High-performance subambient radiative cooling enabled by optically selective and thermally insulating polyethylene aerogel10.1126/sciadv.aat9480 ↗
18. Radiative cooling to deep sub-freezing temperatures through a 24-h day-night cycle10.1038/ncomms13729 ↗
19. Harvesting renewable energy from Earth's mid-infrared emissions10.1073/pnas.1402036111 ↗
20. A novel self-powering ultrathin TEG device based on micro/nano emitter for radiative cooling10.1016/j.nanoen.2018.10.057 ↗
21. Generating light from darkness10.1016/j.joule.2019.08.009 ↗
22. Mathematical modelling and performance evaluation of a hybrid photovoltaic-thermoelectric system10.1016/j.enconman.2019.111800 ↗
23. Comparative study of a concentrated photovoltaic-thermoelectric system with and without flat plate heat pipe10.1016/j.enconman.2019.04.055 ↗
24. Conceptual development of a novel photovoltaic-thermoelectric system and preliminary economic analysis10.1016/j.enconman.2016.08.074 ↗
25. Daytime passive radiative cooler using porous alumina10.1016/j.solmat.2018.10.027 ↗
26. Near-perfect selective photonic crystal emitter with nanoscale layers for daytime radiative cooling10.1021/acsanm.9b01097 ↗
27. A metamaterial emitter for highly efficient radiative cooling10.1002/adom.201500119 ↗
28. Radiative cooling: principles, progress, and potentials10.1002/advs.201500360 ↗
29. A review of clear sky radiative cooling developments and applications in renewable power systems and passive building cooling10.1016/j.solmat.2018.01.015 ↗
30. Subambient cooling of water: toward real-world applications of daytime radiative cooling10.1016/j.joule.2018.10.006 ↗
31. Effect of atmospheric water vapor on radiative cooling performance of different surfaces10.1016/j.solener.2019.03.011 ↗
32. Performance evaluation of the hybrid photovoltaic-thermoelectric system with light and heat management10.1016/j.energy.2020.118618 ↗
33. A dual-layer structure with record-high solar reflectance for daytime radiative cooling10.1016/j.solener.2018.04.031 ↗
34. Advances and challenges in commercializing radiative cooling10.1016/j.mtphys.2019.100161 ↗