journal article·2019-10

Root cause analysis on corrosive potential-induced degradation effects at the rear side of bifacial silicon PERC solar cells

Kai Sporleder, Volker Naumann, Jan Bauer, Susanne Richter, Angelika Hähnel, Stephan Großer, Marko Turek, Christian Hagendorf

Publisher page

Abstract

Abstract Potential induced degradation (PID) of solar cells can severely reduce a PV module's performance. In case of bifacial solar cells, the rear side is another source of PID as was found for industrially produced bifacial PERC solar cells from three different manufacturers. It is shown that a rear-side PID test can lead to more than 12% power degradation. The observed PID mechanisms are not completely recoverable implying long-term losses under field operation. This new, non-recoverable PID effects are characterized by a locally increased recombination at the rear side of the cells. From nano-scale analytics by means of transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (EDXS) are performed and PID related defects are traced back to a local Si corrosion and delamination of the passivation layers. At the Si passivation interface an increased amount of SiOx, Na and further impurities are found that indicate an electrochemically driven corrosion process under cathodic conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photovoltaic System Optimization Techniques · Silicon and Solar Cell Technologies · solar cell performance optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. PERC+: industrial PERC solar cells with rear Al grid enabling bifaciality and reduced Al paste consumption10.1002/pip.2712 ↗
2. Stein · 2017
3. Optimization and performance of bifacial solar modules: a global perspective10.1016/j.apenergy.2017.12.041 ↗
4. Elucidating potential‐induced degradation in bifacial PERC silicon photovoltaic modules10.1002/pip.3028 ↗
5. Investigation of the impact of illumination on the polarization-type potential-induced degradation of crystalline silicon photovoltaic modules10.1109/JPHOTOV.2018.2843791 ↗
6. The surface polarization effect in high-efficiency silicon solar cells
7. Explanation of potential-induced degradation of the shunting type by Na decoration of stacking faults in Si solar cells10.1016/j.solmat.2013.06.015 ↗
8. Drift characteristics of mobile ions in SiNx films and solar cells10.1016/j.solmat.2015.06.022 ↗
9. Local corrosion of silicon as root cause for potential induced degradation at the rear side of bifacial PERC solar cells10.1002/pssr.201900163 ↗
10. Light induced degradation of rear passivated mc-Si solar cells
11. A new mc-Si degradation effect called LeTID
12. Light-induced degradation in crystalline silicon solar cells
13. Chemical and structural study of electrically passivating Al2O3/Si interfaces prepared by atomic layer deposition10.1116/1.4704601 ↗
14. Cathodic corrosion of polycrystalline silicon MEMS10.1016/j.sna.2007.12.006 ↗
15. Naumann, Volker, et al. "Search for microstructural defects as nuclei for PID-shunts in silicon solar cells." Conference: 2017 IEEE 44th Photovoltaic Specialist Conference (PVSC).10.1109/PVSC.2017.8366322 ↗
16. Electrically active sodium-related defect centres in silicon10.1088/0268-1242/28/10/105010 ↗
17. Sodium outdiffusion from stacking faults as root cause for the recovery process of potential-induced degradation (PID)10.1016/j.egypro.2014.08.013 ↗