Ultra-thin atomic layer deposited aluminium oxide tunnel layer passivated hole-selective contacts for silicon solar cells
Source abstract
Abstract
Abstract In this work, we use ultra-thin thickness-controllable spatial atomic layer deposited (ALD) aluminium oxide (AlOx) tunnel layers, which contain high negative fixed charges (Qf), capped by highly boron-doped polysilicon layers to form tunnel layer passivated contacts. The high Qf of the tunnel layers is expected to enhance the carrier selectivity of these passivated hole-extracting contacts. The dependence of the ALD AlOx tunnel layer contact passivation performance on its thickness is investigated. Furthermore, two different thermal charge activation conditions, i.e., fast firing using a belt furnace at 700 and 800 °C are compared. The best measured recombination current density J0 and implied open-circuit voltage iVoc of the developed AlOx/polysilicon passivated contacts with a symmetrical AlOx/SiNx stack passivation are 6.6 fA/cm2 and 723 mV, respectively. Based on the measured J0 and on the measured total contact resistivity of the passivated contact, the practical efficiency limit of a rear-side full area passivated contact solar cell with a conventionally diffused front side is calculated to be as high as 23.2%. Additionally, three rear-side metallization schemes: (1) thermally evaporated full-area silver contacts; (2) screen-printed non-firing-through aluminium contacts and (3) screen-printed firing-through silver-aluminium contacts, are compared. Finally, rear-emitter solar cells, using a rear-side hole-selective AlOx tunnel layer passivated contact, are fabricated, which shows an efficiency of up to 20.5%. While the proposed hole-selective passivated contact scheme appears to be promising based on the simulation prediction, the efficiency of the fabricated cells is largely limited by the non-optimized front-side reflectance and recombination losses as well as the use of non-optimized rear-side metallization schemes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Integrated Circuits and Semiconductor Failure Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Modelling the PERC structure for industrial quality silicon10.1016/S0927-0248(01)00124-6 ↗
2. N-Type Si solar cells with passivating electron contact: identifying sources for efficiency limitations by wafer thickness and resistivity variation10.1016/j.solmat.2017.05.042 ↗
3. S.W. Glunz, F. Feldmann, A. Richter, M. Bivour, C. Reichel, H. Steinkemper, J. Benick, M. Hermle, The irresistible charm of a simple current flow pattern-25% with a solar cell featuring a full area back contact, in: Proceedings of the 31st European Photovoltaic Solar Energy Conference and Exhibition, Hamburg, Germany, 2015, pp. 259–263.
4. Passivating contacts for silicon solar cells based on boron-diffused recrystallized amorphous silicon and thin dielectric interlayers10.1016/j.solmat.2016.03.033 ↗
5. Junction resistivity of carrier-selective polysilicon on oxide junctions and its impact on solar cell performance10.1109/JPHOTOV.2016.2614123 ↗
6. Organic-silicon solar cells exceeding 20% efficiency10.1016/j.egypro.2015.07.047 ↗
7. Large-area PEDOT:PSS/c-Si heterojunction solar cells With screen-printed metal contacts10.1002/solr.201700191 ↗
8. Ultralow surface recombination of c-Si substrates passivated by plasma-assisted atomic layer deposited Al2O310.1063/1.2240736 ↗
9. Surface passivation investigation on ultra-thin atomic layer deposited aluminum oxide layers for their potential application to form tunnel layer passivated contacts10.7567/JJAP.56.08MB14 ↗
10. Metal-oxide-based hole-selective tunneling contacts for crystalline silicon solar cells10.1016/j.solmat.2013.06.016 ↗
11. Numerical investigation of metal–semiconductor–insulator–semiconductor passivated hole contacts based on atomic layer deposited AlOx10.7567/JJAP.56.08MB08 ↗
12. Contact passivation in silicon solar cells using atomic-layer-deposited aluminum oxide layers10.1002/pssr.201105285 ↗
13. Enhanced charge collection with ultrathin AlOx electron blocking layer for hole-transporting material-free perovskite solar cell10.1039/C4CP04902K ↗
14. Boron penetration in p+ polycrystalline-Si/Al2O3/Si metal–oxide–semiconductor system10.1063/1.1315346 ↗
15. Self-forming AlOx layer as Cu diffusion barrier on porous low-k film10.1016/j.tsf.2009.11.075 ↗
16. Robustness of ultrathin aluminum oxide dielectrics on Si(001)10.1063/1.1367902 ↗
17. Working principle of carrier selective poly-Si/c-Si junctions: is tunnelling the whole story?10.1016/j.solmat.2016.05.045 ↗
18. Passivation of a metal contact with a tunneling layer10.1016/j.egypro.2012.05.010 ↗
19. High-speed spatial atomic-layer deposition of aluminum oxide layers for solar cell passivation10.1002/adma.201000766 ↗
20. Low Temperature plasma-enhanced atomic layer deposition of metal oxide thin films10.1149/1.3428705 ↗
21. n-type polysilicon passivating contact for industrial bifacial n-type solar cells10.1016/j.solmat.2016.06.034 ↗
22. D.E. Kane, R.M. Swanson, Measurement of the emitter saturation current by a contactless photoconductivity decay method, in: Proceedings of the 18th IEEE Photovoltaic Specialists Conference, Las Vegas, USA, 1985, pp. 578–581.
23. Interface and material characterization of thin ALD-Al2O3 layers on crystalline silicon10.1016/j.egypro.2012.07.069 ↗
24. UV-enhanced atomic layer deposition of Al2O3 thin films at low temperature for gas-diffusion barriers10.1039/C6RA27759D ↗
25. Structual properties of a-SiOx layers deposited by reactive sputtering technique
26. COCOS (corona charge characterisation of semiconductor) Non-contact metrology for gate dielectrics
27. Polycrystalline silicon passivated tunneling contacts for high efficiency silicon solar cells10.1557/jmr.2016.77 ↗
28. Hydrogen passivation of poly-Si/SiOx contacts for Si solar cells using Al2O3 studied with deuterium10.1063/1.5031118 ↗
29. Pinhole density and contact resistivity of carrier selective junctions with polycrystalline silicon on oxide10.1063/1.4986924 ↗
30. Silicon passivation and tunneling contact formation by atomic layer deposited Al2O3/ZnO stacks10.1088/0268-1242/28/8/082002 ↗
31. Ultra-thin ALD-AlOx/PEDOT: pss hole selective passivated contacts: an attractive low cost approach to increase solar cell performance10.1016/j.solmat.2018.06.002 ↗
32. R. Brendel, M. Rienaecker, R. Peibst, A quantitive measure for the carrier selectivitity of contacts to solar cells, in: Proceedings of the 32nd European Photovoltaic Solar Energy Conference and Exhibition, Munich, Germany, 2016, pp. 447–451.
33. Modulated photoluminescence lifetime measurement of bifacial solar cells10.1109/JPHOTOV.2017.2733163 ↗
34. Study of screen printed metallization for polysilicon based passivating contacts10.1016/j.egypro.2017.09.242 ↗
35. Metallisation of boron-doped polysilicon layers by screen printed silver pastes10.1002/pssr.201700334 ↗
36. 2/3-Diode Fit, 2014. 〈http://nanohub.org/resources/14300〉 (Accessed 2 February 2018), in.