Thermal properties and friction behaviors of slag as energy storage material in concentrate solar power plants
Source abstract
Abstract
Abstract Thermal energy storage (TES) system is greatly used in concentrated solar power (CSP) plants to collect energy for later need. It is proposed that slag is suitable for energy storage in CSP plants, however, little has been studied in this field. In this paper, the thermal stability, specific heat capacity, thermal conductivity and microstructures of two electric arc furnace (EAF) slag samples were studied. In TES system, as heat storage material, slag will meet with high temperature and low temperature environment. The wear resulted from heat expansion and cold contraction of slag with storaging and releasing energy process was addressed. The results revealed that slag is a good candidate to be used as heat storage material for TES system. Revalorization of slag into TES material is a cost-effective solution to the CSP plants and the industry waste recovery.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. E.I.A. (U.S.), International Energy Outlook 2013 With Projections to 2040, U.S. Government Printing Office, 2013.
2. Suitability and characteristics of rocks for sensible heat storage in CSP plants10.1016/j.solmat.2017.05.033 ↗
3. Advances in the valorization of waste and by-product materials as thermal energy storage (TES) materials10.1016/j.rser.2015.12.071 ↗
4. Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sources10.1016/j.renene.2006.04.015 ↗
5. Thermal energy storage technologies and systems for concentrating solar power plants10.1016/j.pecs.2013.02.001 ↗
6. State of the art on high-temperature thermal energy storage for power generation. Part 2—Case studies10.1016/j.rser.2009.07.036 ↗
7. Thermophysical characterization of a by-product from the steel industry to be used as a sustainable and low-cost thermal energy storage material10.1016/j.energy.2015.05.153 ↗
8. Selection of materials for high temperature sensible energy storage10.1016/j.solmat.2013.03.009 ↗
9. The prospect of high temperature solid state energy conversion to reduce the cost of concentrated solar power10.1039/C4EE00288A ↗
10. Recycled material for sensible heat based thermal energy storage to be used in concentrated solar thermal power plants10.1115/1.4004267 ↗
11. Thermal decomposition of asbestos and recycling in traditional ceramics10.1016/S0955-2219(99)00290-3 ↗
12. Compatibility of a post-industrial ceramic with nitrate molten salts for use as filler material in a thermocline storage system10.1016/j.apenergy.2012.12.078 ↗
13. High-temperature sensible heat-based thermal energy storage materials made of vitrified MSWI fly ashes10.1007/s12649-015-9409-9 ↗
14. Test results of concrete thermal energy storage for parabolic trough power plants10.1115/1.3197844 ↗
15. N. Calvet, G. Dejean, L. Unamunzaga, X. Py, Waste from metallurgic industry: a sustainable high temperature thermal energy storage material for concentrated solar power, in: Proceedings of the ASME. Minneapolis, USA. 〈https://dx.doi.org/10.1115/ES2013-18333〉, 2013.10.1115/ES2013-18333 ↗
16. Industrial waste produced in the UAE, valuable high-temperature materials for thermal energy storage applications10.1016/j.egypro.2015.07.320 ↗
17. Characterization of a by-product from steel industry applied to thermal energy storage in concentrated solar power
18. Thermo-physical properties of a steel-making by-product to be used as thermal energy storage material in a packed-bed system ☆10.1016/j.egypro.2015.03.180 ↗
19. Experimental evaluation of EAF ladle steel slag as a geo-fill material: mineralogical, physical & mechanical properties10.1016/j.conbuildmat.2017.07.149 ↗
20. Steel slag — its production, processing, characteristics, and cementitious properties
21. Durability of concrete made with EAF slag as aggregate10.1016/j.cemconcomp.2006.02.008 ↗
22. The long-term accelerated expansion of various ladle-furnace basic slags and their soil-stabilization applications10.1016/j.conbuildmat.2014.07.023 ↗
23. Comparison of properties of steel slag and crushed limestone aggregate concretes10.1016/S0950-0618(02)00095-8 ↗
24. Concrete with EAF steel slag as aggregate: a comprehensive technical and environmental characterisation10.1016/j.compositesb.2015.12.022 ↗
25. An overview of utilization of steel slag10.1016/j.proenv.2012.10.108 ↗
26. Experimental investigation of basic oxygen furnace slag used as aggregate in asphalt mixture10.1016/j.jhazmat.2006.02.073 ↗
27. Removal characteristics of As(III) and As(V) from acidic aqueous solution by steel making slag10.1016/j.jhazmat.2012.01.074 ↗
28. Valorisation of electric arc furnace steel slag as raw material for low energy belite cements10.1016/j.jhazmat.2011.09.024 ↗
29. Characterization of ladle furnace basic slag for use as a construction material10.1016/j.conbuildmat.2008.10.003 ↗
30. Position paper on the status of ferrous slag, The European Slag Association, 2012.
31. A review on packed bed solar energy storage systems10.1016/j.rser.2009.10.022 ↗
32. Rock bed storage for solar thermal power plants: rock characteristics, suitability, and availability10.1016/j.solmat.2014.03.030 ↗
33. Preparation and characterization of atmospheric plasma-sprayed NiCr/Cr3C2–BaF2·CaF2 composite coating10.1016/j.surfcoat.2009.03.027 ↗
34. Wen · 2011
35. A preliminary study of autoclaved alkali-activated slag blended with quartz powder10.1016/j.conbuildmat.2011.12.104 ↗
36. Thermal storage using slag
37. Thermophysical and chemical characterization of induction furnace slags for high temperature thermal energy storage in solar tower plants10.1016/j.solmat.2017.07.035 ↗
38. Application of square-wave pulse heat method to thermal properties measurement of CaO–SiO2–Al2O3 system fluxes10.2355/isijinternational.46.427 ↗
39. Survey of thermal energy storage for parabolic trough power plants10.1115/1.1467601 ↗
40. Tribological behavior of SiC‐whisker/Al2O3 composites against carburized 8620 steel in lubricated sliding10.1111/j.1151-2916.1991.tb08289.x ↗
41. Influence of slag weight fraction on mechanical, thermal and tribological properties of polymer based friction materials10.1016/j.matdes.2015.10.097 ↗
42. Tribology and high temperature friction wear behavior of MCrAlY laser cladding coatings on stainless steel10.1016/j.wear.2015.01.048 ↗
43. Study on friction characterization and wear-resistance properties of Si3N4 ceramic sliding against different high-temperature alloys10.1016/j.ceramint.2016.08.013 ↗
44. Ceramic Floor Slipperiness Classification – A new approach for assessing slip resistance of ceramic tiles10.1016/j.conbuildmat.2017.12.242 ↗
45. Friction and cohesion coefficients of composite concrete-to-concrete bond10.1016/j.cemconcomp.2014.10.003 ↗
46. Influence of slag weight fraction on mechanical, thermal and tribological properties of polymer based friction materials10.1016/j.matdes.2015.10.097 ↗
47. Mechanical and tribological properties of ceramic-matrix friction materials with steel fiber and mullite fiber10.1016/j.matdes.2014.01.017 ↗
48. Wear resistance of diode laser-clad Ni/WC composite coatings at different temperatures10.1016/j.surfcoat.2016.06.081 ↗
49. Comparison of the wear behavior of WC/(FeAl-B) and WC-Co composites at high temperatures10.1016/j.ijrmhm.2017.05.003 ↗
50. Friction properties of high temperature boride coating under dry air and water vapor ambiences10.1016/j.ceramint.2014.04.091 ↗
51. Allen · 2010
52. Crack propagation by differential insolation on desert surface clasts10.1016/j.geomorph.2008.05.012 ↗
53. Recycling of RAP and steel slag aggregates into the warm mix asphalt: a performance evaluation10.1016/j.conbuildmat.2017.04.117 ↗